NCERT Solutions · Class 11 Economics · NCERT Indian Economic Development and Statistics for Economics Statistics for Economics · Chapter 4
Chapter 4: Presentation of Data (Presentation of Data)
NCERT solutions for Class 11 Economics Statistics for Economics Chapter 4: Presentation of Data (2026-27). Answers to all exercises and in-text activities on tables, bar diagrams, pie diagrams, histograms, ogives and time series graphs. All 25 questions are answered, with the key answer highlighted.
(i) one-dimensional diagram. Only the height (length) of a bar shows the magnitude; the width of the bars is unimportant and is kept equal only for appearance.
Data represented through a histogram can help in finding graphically the
mean
mode
median
all the above
Solution
(ii) mode. The x-coordinate of the dotted vertical line drawn in a histogram, through the tallest rectangle, gives the mode of the frequency distribution (Fig. 4.5).
Data represented through arithmetic line graph help in understanding
long term trend
cyclicity in data
seasonality in data
all the above
Solution
(iv) all the above. An arithmetic line graph (time series graph) helps in understanding the trend, periodicity and other features of long-term time series data.
Width of bars in a bar diagram need not be equal (True/False).
Solution
False. A bar diagram is made of equispaced and equiwidth rectangular bars. Although the width is unimportant for comparison, the bars are drawn with the same width.
Width of rectangles in a histogram should essentially be equal (True/False).
Solution
False. The widths are generally equal, but they can be unequal when the class intervals are unequal. In that case the heights of the rectangles are adjusted by using the frequency density (class frequency divided by class width), so that areas stay proportional to frequencies.
Histogram can only be formed with continuous classification of data (True/False).
Solution
True. A histogram is drawn only for a continuous variable, with the rectangles adjacent to each other. If the classes are not continuous, they are first converted into continuous classes, as discussed in Chapter 3.
Histogram and column diagram are the same method of presentation of data. (True/False)
Solution
False. They look alike but differ. In a bar (column) diagram only the height matters, the width is arbitrary, and space is left between the bars; it can be used for both discrete and continuous variables. In a histogram both the width and the height (area) matter, there is no space between the rectangles, and it is drawn only for a continuous variable.
What kind of diagrams are more effective in representing the following?
Monthly rainfall in a year
Composition of the population of Delhi by religion
Components of cost in a factory
Solution
Data
Diagram
Reason
(i) Monthly rainfall in a year
Bar (column) diagram, or an arithmetic line graph
It is non-frequency, time series data (months on the X-axis, rainfall on the Y-axis); bars are usually used for time series and make months easy to compare.
(ii) Composition of the population of Delhi by religion
Pie diagram (or a component bar diagram)
The population is divided into parts (religions) of a whole; the pie shows the share of each part as a slice.
(iii) Components of cost in a factory
Component bar diagram (or a pie diagram)
Cost is made up of components; a component bar shows the total and the size of each component and their relationship. The same data may be shown on a pie chart after conversion into percentages.
Suppose you want to emphasise the increase in the share of urban non-workers and lower level of urbanisation in India as shown in Example 4.2. How would you do it in the tabular form?
Solution
The book's 'Example 4.2' is the Case 2 data of Census 2001 on page 41, which Table 4.5 presents in tabular form (population of India by workers and non-workers, 2001, crore). To emphasise the two points, the table should show shares (per cent) and put the urban row first, with the key columns highlighted. Calculations from Table 4.5:
Share of urban population = 28/102 x 100 = 27.5 per cent; rural = 74/102 x 100 = 72.5 per cent (low urbanisation).
Non-workers as per cent of the population: urban = 19/28 x 100 = 67.9; rural = 43/74 x 100 = 58.1; India = 62/102 x 100 = 60.8.
Share in all non-workers of India: urban = 19/62 x 100 = 30.6; rural = 43/62 x 100 = 69.4.
Location
Population (crore)
Share in total population (%)
Non-workers (crore)
Non-workers as % of the location's population
Urban
28
27.5
19
67.9
Rural
74
72.5
43
58.1
All India
102
100.0
62
60.8
Source: Census of India 2001. Note: figures are rounded to the nearest crore. The table shows that only about 27.5 per cent of India's population lived in urban areas (low urbanisation), but the share of non-workers in the urban population (67.9 per cent) was higher than in the rural population (58.1 per cent) and also higher than the national figure.
How does the procedure of drawing a histogram differ when class intervals are unequal in comparison to equal class intervals in a frequency table?
Solution
With equal class intervals all rectangles have the same base, so the area of each rectangle is proportional to its frequency and the frequency itself can be plotted as the height.
With unequal class intervals the bases differ in width, so plotting the absolute frequency would give a misleading picture (a wide class would look larger). The heights must be adjusted to give comparable measurements: the frequency density (frequency divided by the width of the class interval) is calculated for each class and plotted as the height. The area of each rectangle (width x frequency density) is then equal to the frequency of the class.
The Indian Sugar Mills Association reported that, 'Sugar production during the first fortnight of December 2001 was about 3,87,000 tonnes, as against 3,78,000 tonnes during the same fortnight last year (2000). The off-take of sugar from factories during the first fortnight of December 2001 was 2,83,000 tonnes for internal consumption and 41,000 tonnes for exports as against 1,54,000 tonnes for internal consumption and nil for exports during the same fortnight last season.'
Present the data in tabular form.
Suppose you were to present these data in diagrammatic form which of the diagrams would you use and why?
Present these data diagrammatically.
Solution
(i) Tabular form
Item
First fortnight of December 2001
First fortnight of December 2000
Sugar production
3,87,000
3,78,000
Off-take for internal consumption
2,83,000
1,54,000
Off-take for exports
41,000
Nil
Title: Production and off-take of sugar, first fortnight of December (tonnes). Source: Indian Sugar Mills Association.
(ii) Choice of diagram. A multiple bar diagram, because two sets of data (2001 and 2000) have to be compared for the same three items. Bars of the two years for each item stand side by side, so the rise or fall in each item is seen at once. The data are non-frequency data, for which bar diagrams are convenient.
(iii) Construction. Draw the X-axis with three groups: Production, Off-take for internal consumption and Off-take for exports. Draw the Y-axis as "Tonnes (in thousands)" from 0 to 400 with equal steps of 50. In every group draw two adjacent bars of equal width, using different shading for 2001 and 2000, with a small gap between the groups. Bar heights (thousand tonnes):
Group
Bar for 2001
Bar for 2000
Production
387
378
Internal consumption
283
154
Exports
41
0 (no bar)
Add a title, a legend for the two shadings and the source. The diagram shows that production rose only slightly (by 9 thousand tonnes), while internal off-take rose sharply (by 129 thousand tonnes) and exports started in 2001.
The following table shows the estimated sectoral real growth rates (percentage change over the previous year) in GDP at factor cost.
Year
Agriculture and allied sectors
Industry
Services
1994-95
5.0
9.2
7.0
1995-96
-0.9
11.8
10.3
1996-97
9.6
6.0
7.1
1997-98
-1.9
5.9
9.0
1998-99
7.2
4.0
8.3
1999-2000
0.8
6.9
8.2
Represent the data as multiple time series graphs.
Solution
A multiple time series graph shows several series on the same axes. Steps of construction:
Draw the X-axis (time) and mark the six years, 1994-95 to 1999-2000, at equal distances.
Draw the Y-axis as "Growth rate (per cent over the previous year)". Because the agriculture series has negative values (-0.9 and -1.9) and the highest value is 11.8, take the scale from -4 to 12 in steps of 2, and draw the X-axis through 0.
For each series plot the point of every year against its value and join the points by straight lines, using a different line style or colour for each series, and add a legend.
Year
Agriculture (points)
Industry (points)
Services (points)
1994-95
5.0
9.2
7.0
1995-96
-0.9
11.8
10.3
1996-97
9.6
6.0
7.1
1997-98
-1.9
5.9
9.0
1998-99
7.2
4.0
8.3
1999-2000
0.8
6.9
8.2
Reading the graph: the agriculture line fluctuates sharply and falls below zero in 1995-96 and 1997-98 (peak 9.6 in 1996-97); the industry line peaks at 11.8 in 1995-96, falls to 4.0 in 1998-99 and recovers to 6.9; the services line stays comparatively steady between 7.0 and 10.3.
Discuss how the total values are arrived at in Table 4.1 (Literacy in India by sex and location, per cent: Male rural 79, urban 90, total 82; Female rural 59, urban 80, total 65; Total rural 68, urban 84, total 74).
Solution
The figures are literacy rates in per cent, so the totals are not obtained by adding the entries. Each total is the literacy rate of the whole group, calculated separately from the number of literates and the population of that group (aged 7 years and above). For example, the male total (82) is the rate for all males, rural and urban together. It lies between the rural (79) and urban (90) rates, and nearer the rural rate, because the rural population is larger. The same logic gives the row total for females (65), the column totals and the overall figure of 74 per cent.
How many rows and columns are essentially required to form a table?
Solution
There is no fixed minimum for the data rows and columns, since a table can be one-way (one characteristic), two-way or three-way. Essentially a table needs the stub (row headings) and at least one column of data under a caption (column heading), so the minimum is two columns (stub and data), and at least one row of data plus the caption row. The tables in the chapter, such as Table 4.1 (3 x 3), have more rows and columns, depending on the number of characteristics.
Can the column/row headings of a table be quantitative?
Solution
Yes. Headings can be qualitative (such as male and female) or quantitative. For example, in Table 4.2 the row headings are age groups in years (20-30, 30-40 and so on), in Table 4.3 they are years, and in the table of daily earnings they are class intervals in rupees.
Can you present tables 4.2 and 4.3 after rounding off figures appropriately?
Solution
Yes. Figures that are large or have decimals can be rounded, and the method of rounding is stated in a note. Rounded to whole numbers (halves rounded up):
Age group (yrs)
No. of respondents
Per cent (rounded)
20-30
3
1
30-40
61
11
40-50
132
24
50-60
153
28
60-70
140
26
70-80
51
9
80-90
2
0
All
542
100
Note: percentages are rounded to the nearest whole number, so they add to 99 instead of 100. The figure for the class 60-70 is the one calculated in A2.
Present the first two sentences of case 2 on p. 41 as a table. Some details for this would be found elsewhere in this chapter.
Solution
The two sentences say that the population of India rose to 102 crore in 2001, of which 49 crore were females and 53 crore males, and that 74 crore lived in rural and 28 crore in urban India. The table is:
Location
Male (crore)
Female (crore)
Total (crore)
Rural
38
36
74
Urban
15
13
28
All India
53
49
102
Title: Population of India by gender and location, 2001. Source: Census of India 2001. The rural and urban figures by gender are taken from Table 4.5 (rounded to the nearest crore).
How many states (among the major states of India) had higher female literacy rate than the national average in 2011?
Solution
The national female literacy rate in 2011 (Table 4.6) was 65.5 per cent. States with a higher rate: Assam (67.3), Gujarat (70.7), Haryana (66.8), Karnataka (68.1), Kerala (92.0), Maharashtra (75.5), Punjab (71.3), Tamil Nadu (73.9), Uttarakhand (70.7) and West Bengal (71.2). That makes 10 states. The other 8 (Andhra Pradesh, Bihar, Jharkhand, Madhya Pradesh, Chhattisgarh, Odisha, Rajasthan and Uttar Pradesh) were below it.
Represent data presented through Figure 4.4 by a component bar diagram.
Solution
Table 4.8 gives the share of each category in the Indian population in 2011: marginal workers 9.9 per cent, main workers 29.8 per cent and non-workers 60.3 per cent (together 100 per cent). (The table prints the total as 102 crore, but its components, 12 + 36 + 73, add up to 121 crore, and the per cent figures correspond to 121 crore.)
Construction: draw one bar on the X-axis whose height is 100 units (the data are in per cent), with the Y-axis from 0 to 100. Divide the bar into three parts, putting the smallest component first (as the chapter advises): 0 to 9.9 for marginal workers, 9.9 to 39.7 (height 29.8) for main workers and 39.7 to 100 (height 60.3) for non-workers. Shade each part differently, give a legend and the title "Indian population by working status, 2011", and add the source.
Does the area of a pie have any bearing on the total value of the data to be represented by the pie diagram?
Solution
No. A pie diagram is a circle that, whatever its radius, is regarded as having 100 equal parts of 3.6 degrees each. Values are first expressed as percentages of the total, and each percentage is multiplied by 3.6 to obtain the angle of its slice. So the size of the circle does not depend on the total value, which is simply written alongside; the pie only shows the proportions of the components.
No
Done with the answers?Now revise the whole chapter: Class 11 Economics notes
For NCERT Statistics for Economics (Class 11) and Introductory Microeconomics (2026-27 editions) - all 13 chapters of the CBSE Class 11 syllabus
Typed concept notes with labelled diagrams, tables and formulas
Every NCERT exercise solved in full: statistics numericals (mean, median, mode, correlation, index numbers) and microeconomics numericals and graphs
US$2.99US$3.9920% off · all 13 chapters · instant PDF