Measures of Central Tendency Class 11 Question Answer | NCERT Economics Chapter 5 Solutions Skip to content
Smart Notes for Every Exam · instant PDF download after payment +91 92520 37565
NCERT Solutions · Class 11 Economics · NCERT Indian Economic Development and Statistics for Economics Statistics for Economics · Chapter 5

Chapter 5: Measures of Central Tendency (Measures of Central Tendency)

NCERT solutions for Class 11 Economics Statistics for Economics Chapter 5: Measures of Central Tendency (2026-27). Answers to all exercises with full working for mean, median, quartiles and mode, plus the in-text activities. All 25 questions are answered, with the key answer highlighted.

NCERT textbook Chapter 5 (PDF)

Exam revision? Chapter 5 notes with key points, diagrams and practice questions: see the free sample · ₹199 for all 13 chapters

Free NCERT solutions by Notes Bazar · www.notesbazar.in/ncert-solutions/class-11-economics/measures-of-central-tendency

Exercises

1
Which average would be suitable in the following cases?
  1. Average size of readymade garments.
  2. Average intelligence of students in a class.
  3. Average production in a factory per shift.
  4. Average wage in an industrial concern.
  5. When the sum of absolute deviations from average is least.
  6. When quantities of the variable are in ratios.
  7. In case of open-ended frequency distribution.
Solution
  1. Mode. The manufacturer wants the size that is demanded most often, and mode is the most typical, most frequently occurring value.
  2. Median. Intelligence is a qualitative trait that can be ranked but not measured exactly, and the median depends only on position in the ordered series.
  3. Arithmetic mean. Production per shift is a quantitative variable and the mean uses every observation.
  4. Arithmetic mean (weighted where the groups differ in size), because wages are quantitative and every worker's wage should count.
  5. Median. The sum of absolute deviations is least when taken from the median.
  6. Geometric mean, which is the suitable average when quantities change in ratios or rates.
  7. Median (or mode). The median needs only the central position, so it can be found even when the first or last class has no limit.
2(i)
The most suitable average for qualitative measurement is
  1. arithmetic mean
  2. median
  3. mode
  4. geometric mean
  5. none of the above
Solution

(b) median. Qualitative traits such as intelligence or honesty cannot be measured exactly but can be ranked, and the median depends only on the position of items in the ordered series (the book's answer key gives (b)).

(b) median

2(ii)
Which average is affected most by the presence of extreme items?
  1. median
  2. mode
  3. arithmetic mean
  4. none of the above
Solution

(c) arithmetic mean. It is based on all the observations, so a very large or very small value pushes it up or down, whereas the median and mode depend on the central or most frequent values.

(c) arithmetic mean

2(iii)
The algebraic sum of deviation of a set of n values from A.M. is
  1. n
  2. 0
  3. 1
  4. none of the above
Solution

(b) 0. The sum of deviations of items from the arithmetic mean is always zero, that is Σ(X − X̄) = 0.

(b) 0

3(i)
Comment whether the following statements are true or false.
The sum of deviation of items from median is zero.
Solution

False. It is the sum of deviations from the arithmetic mean that is always zero. Deviations from the median are positive and negative but in general do not cancel out.

False

3(ii)
An average alone is not enough to compare series.
Solution

True. Two series can have the same average but very different spread of values, so a measure of dispersion is also needed for a proper comparison.

True

3(iii)
Arithmetic mean is a positional value.
Solution

False. The arithmetic mean is a calculated value based on all observations. The median (and the quartiles) are positional values.

False

3(iv)
Upper quartile is the lowest value of top 25% of items.
Solution

True. The upper quartile Q3 has 75% of the items below it and 25% above it, so it marks the lowest value of the top 25% of items.

True

3(v)
Median is unduly affected by extreme observations.
Solution

False. The median depends only on the central items, so it is not sensitive to extreme values; it is the arithmetic mean that is unduly affected.

False

4
If the arithmetic mean of the data given below is 28, find (a) the missing frequency, and (b) the median of the series:
Profit per retail shop (in Rs)0-1010-2020-3030-4040-5050-60
Number of retail shops121827-176
Solution

(a) Missing frequency. Let the missing frequency be x. Mean = Σfm / Σf.

Profit (Rs)fMid value mfm
0-1012560
10-201815270
20-302725675
30-40x3535x
40-501745765
50-60655330
Total80 + x2,100 + 35x

(60 + 270 + 675 + 765 + 330 = 2,100 and 12 + 18 + 27 + 17 + 6 = 80.)

28 = (2,100 + 35x)/(80 + x), so 2,240 + 28x = 2,100 + 35x, so 7x = 140, so x = 20.

Check: Σf = 100, Σfm = 2,100 + 700 = 2,800, mean = 2,800/100 = 28. Correct.

(b) Median. N = 100, so N/2 = 50.

Profit (Rs)fCumulative f
0-101212
10-201830
20-302757
30-402077
40-501794
50-606100

The cumulative frequency first exceeds 50 in the class 20-30, so it is the median class: L = 20, cf (before) = 30, f = 27, h = 10.

Median = L + [(N/2 − cf)/f] × h = 20 + [(50 − 30)/27] × 10 = 20 + 200/27 = 20 + 7.41 = 27.41.

(a) Missing frequency = 20; (b) Median = Rs 27.41

5
The following table gives the daily income of ten workers in a factory. Find the arithmetic mean.
WorkersABCDEFGHIJ
Daily Income (in Rs)120150180200250300220350370260
Solution

Direct method: X̄ = ΣX/N.

ΣX = 120 + 150 + 180 + 200 + 250 + 300 + 220 + 350 + 370 + 260 = 2,400, and N = 10.

X̄ = 2,400/10 = 240.

Check by assumed mean (A = 200): deviations d = −80, −50, −20, 0, 50, 100, 20, 150, 170, 60, so Σd = 400 and X̄ = 200 + 400/10 = 240.

Arithmetic mean = Rs 240 per day

6
Following information pertains to the daily income of 150 families. Calculate the arithmetic mean.
Income (in Rs)Number of families
More than 75150
,, 85140
,, 95115
,, 10595
,, 11570
,, 12560
,, 13540
,, 14525
Solution

This is a "more than" cumulative series, so first convert it into an ordinary frequency distribution by subtracting the next cumulative figure from each one. The last class is open-ended; taking it to have the same width (10), it is 145-155 with 25 families.

Income (Rs)Frequency fMid value mfm
75-85150 − 140 = 1080800
85-95140 − 115 = 25902,250
95-105115 − 95 = 201002,000
105-11595 − 70 = 251102,750
115-12570 − 60 = 101201,200
125-13560 − 40 = 201302,600
135-14540 − 25 = 151402,100
145-155251503,750
Total15017,450

X̄ = Σfm/Σf = 17,450/150 = 116.33, that is about 116.3.

Check by step deviation (A = 110, c = 10): d′ = −3, −2, −1, 0, 1, 2, 3, 4, and Σfd′ = −30 − 50 − 20 + 0 + 10 + 40 + 45 + 100 = 95, so X̄ = 110 + (95/150) × 10 = 110 + 6.33 = 116.33.

Arithmetic mean = Rs 116.3 (daily income per family)

7
The size of land holdings of 380 families in a village is given below. Find the median size of land holdings.
Size of Land Holdings (in acres)Less than 100100-200200-300300-400400 and above
Number of families40891486439
Solution

N = 40 + 89 + 148 + 64 + 39 = 380, so N/2 = 190.

Size (acres)Families fCumulative f
0-100 (less than 100)4040
100-20089129
200-300148277
300-40064341
400 and above39380

The cumulative frequency first exceeds 190 in the class 200-300, so it is the median class: L = 200, cf = 129, f = 148, h = 100.

Median = L + [(N/2 − cf)/f] × h = 200 + [(190 − 129)/148] × 100 = 200 + 6,100/148 = 200 + 41.22 = 241.22.

The open-ended first and last classes do not matter, which is why the median is suitable here.

Median size of land holding = 241.22 acres

8
The following series relates to the daily income of workers employed in a firm. Compute (a) highest income of lowest 50% workers (b) minimum income earned by the top 25% workers and (c) maximum income earned by lowest 25% workers.
Daily Income (in Rs)10-1415-1920-2425-2930-3435-39
Number of workers5101520105
(Hint: compute median, lower quartile and upper quartile.)
Solution

(a) is the median, (b) is the upper quartile Q3 and (c) is the lower quartile Q1. The classes are inclusive, so convert them into exclusive classes by subtracting 0.5 from each lower limit and adding 0.5 to each upper limit. N = 65.

Income (Rs)Exclusive classWorkers fCumulative f
10-149.5-14.555
15-1914.5-19.51015
20-2419.5-24.51530
25-2924.5-29.52050
30-3429.5-34.51060
35-3934.5-39.5565

(a) Median: N/2 = 32.5, which lies in 24.5-29.5 (cf = 30, f = 20, h = 5). Median = 24.5 + [(32.5 − 30)/20] × 5 = 24.5 + 0.625 = 25.125, that is Rs 25.13 when rounded to two decimal places (the book's key prints Rs 25.11; the exact value of the formula is 25.125, so Rs 25.13 is used here, and Q3 and Q1 are likewise rounded to two decimals).

(b) Upper quartile: 3N/4 = 48.75, which lies in 24.5-29.5 (cf = 30, f = 20). Q3 = 24.5 + [(48.75 − 30)/20] × 5 = 24.5 + 4.6875 = 29.1875, that is about Rs 29.19.

(c) Lower quartile: N/4 = 16.25, which lies in 19.5-24.5 (cf = 15, f = 15). Q1 = 19.5 + [(16.25 − 15)/15] × 5 = 19.5 + 0.4167 = 19.9167, that is about Rs 19.92.

So the highest income of the lowest 50% of workers is the median, the minimum income of the top 25% is Q3 and the maximum income of the lowest 25% is Q1.

(a) Rs 25.13 (b) Rs 29.19 (c) Rs 19.92

9
The following table gives production yield in kg. per hectare of wheat of 150 farms in a village. Calculate the mean, median and mode values.
Production yield (kg. per hectare)50-5353-5656-5959-6262-6565-6868-7171-7474-77
Number of farms381430362816105
Solution

N = Σf = 3 + 8 + 14 + 30 + 36 + 28 + 16 + 10 + 5 = 150.

YieldfMid value mfmCumulative f
50-53351.5154.53
53-56854.543611
56-591457.580525
59-623060.51,81555
62-653663.52,28691
65-682866.51,862119
68-711669.51,112135
71-741072.5725145
74-77575.5377.5150
Total1509,573

Mean = Σfm/Σf = 9,573/150 = 63.82 kg per hectare.

Median: N/2 = 75, which lies in the class 62-65 (cf = 55, f = 36, h = 3). Median = 62 + [(75 − 55)/36] × 3 = 62 + 1.667 = 63.67 kg per hectare.

Mode: the highest frequency is 36, so the modal class is 62-65: L = 62, D1 = 36 − 30 = 6, D2 = 36 − 28 = 8, h = 3. Mode = L + [D1/(D1 + D2)] × h = 62 + [6/(6 + 8)] × 3 = 62 + 1.286 = 63.29 kg per hectare.

Mean = 63.82 kg, median = 63.67 kg, mode = 63.29 kg per hectare

In-text questions

1
Find the mean plot size for the data given in example 3, by using step deviation and assumed mean methods. (Example 3: plots of 100, 200 and 300 sq. metre; number of plots 200, 50 and 10.)
Solution
Plot size X (sq. m)Plots fd = X − 200fdd′ = d/100fd′
100200−100−20,000−1−200
200500000
30010+100+1,000+1+10
Total260−19,000−190

Assumed mean method (A = 200): X̄ = A + Σfd/Σf = 200 + (−19,000/260) = 200 − 73.08 = 126.92 sq. metre.

Step deviation method (A = 200, c = 100): X̄ = A + (Σfd′/Σf) × c = 200 + (−190/260) × 100 = 200 − 73.08 = 126.92 sq. metre.

Mean plot size = 126.92 sq. metre by both methods (same as the direct method)

2
Find mean and median for all four values of the series. What do you observe? (Table 5.4: A = 1, 2, 3; B = 1, 2, 30; C = 1, 2, 300; D = 1, 2, 3000.)
Solution
SeriesValuesMeanMedian
A1, 2, 36/3 = 22
B1, 2, 3033/3 = 112
C1, 2, 300303/3 = 1012
D1, 2, 30003003/3 = 1,0012

For each series N = 3, so the median is the size of the (3 + 1)/2 = 2nd item of the ordered series, which is 2.

Observation: the mean rises from 2 to 11, 101 and 1,001 as the last value becomes larger, but the median stays at 2. The mean is affected by extreme values and the median is not.

Mean = 2, 11, 101, 1,001; median = 2 in every series

3
Is median affected by extreme values? What are outliers?
Solution

No. The median depends only on the middle item(s) of the ordered series, so very large or very small values do not change it (as Table 5.4 shows, the median stays 2 while the mean changes from 2 to 1,001).

Outliers are extreme values that lie far away from the rest of the observations, such as the values 30, 300 and 3000 in series B, C and D.

No, the median is not affected; outliers are extreme values far from the rest of the data

4
Is median a better method than mean?
Solution

It depends on the data. The mean is simple and uses all the observations, but it is unduly affected by extreme items. Where the data contain extreme values (outliers), the median is a better summary because it is not sensitive to them. When there are no extreme values, the mean is the most commonly used average.

The median is the better summary when extreme values are present

5
If you have secured 82 percentile in a management entrance examination, it means that your position is below 18 per cent of total candidates appeared in the examination. If a total of one lakh students appeared, where do you stand?
Solution

82 percentile means 82% of the candidates are at or below your score and 18% are above you.

Number of candidates above you = 18% of 1,00,000 = 0.18 × 1,00,000 = 18,000.

So you stand at about the 18,000th position from the top (roughly rank 18,001), and 82,000 candidates are below you.

About 18,000 students are ahead of you; your rank is around 18,000

6
Find out Q3 yourself. (Example 9: marks of ten students: 22, 26, 14, 30, 18, 11, 35, 41, 12, 32.)
Solution

Arranged in ascending order: 11, 12, 14, 18, 22, 26, 30, 32, 35, 41, with N = 10.

Q3 = size of 3(N + 1)/4 th item = 3 × 11/4 = 8.25th item.

8th item = 32 and 9th item = 35, so Q3 = 32 + 0.25 × (35 − 32) = 32 + 0.75 = 32.75.

Q3 = 32.75 marks

7
A shoe company, making shoes for adults only, wants to know the most popular size of shoes. Which average will be most appropriate for it?
Solution

The mode. The company wants the size that is demanded by the largest number of buyers, and mode is the most frequently occurring value; a mean size such as 7.4 may not exist in production at all.

Mode

8
Which average will be most appropriate for the companies producing the following goods? Why?
  1. Diaries and notebooks
  2. School bags
  3. Jeans and T-Shirts
Solution

Sample answer: in each case the producer wants the most commonly demanded type or size, so the mode is the most appropriate average.

  1. Diaries and notebooks: mode, to know the size, number of pages or style that most buyers prefer.
  2. School bags: mode, to produce the size and style most often bought.
  3. Jeans and T-shirts: mode, because they are made in standard sizes and the most frequently demanded size should be produced in the largest numbers.
9
Take a small survey in your class to know the students' preference for Chinese food using appropriate measure of central tendency.
Solution

Guidance: ask each student to name the Chinese dish he or she prefers (for example noodles, manchurian, fried rice, momos), tally the answers into a frequency table and find the dish with the highest frequency. Preference is qualitative, so the mode is the appropriate measure; the mean cannot be found for names of dishes.

10
Can mode be located graphically?
Solution

Yes. Draw the histogram of the frequency distribution. In the tallest rectangle (the modal class), join the top right corner of the rectangle to the top right corner of the preceding rectangle, and the top left corner to the top left corner of the succeeding rectangle. From the point where the two lines intersect, draw a perpendicular to the X-axis; the point where it meets the axis is the mode. (The book states in its conclusion that median and mode can easily be computed graphically.)

Yes, from the histogram

Cover of Complete Economics Notes for Class 11 (NCERT 2026-27)
Done with the answers?Now revise the whole chapter: Class 11 Economics notes
  • For NCERT Statistics for Economics (Class 11) and Introductory Microeconomics (2026-27 editions) - all 13 chapters of the CBSE Class 11 syllabus
  • Typed concept notes with labelled diagrams, tables and formulas
  • Every NCERT exercise solved in full: statistics numericals (mean, median, mode, correlation, index numbers) and microeconomics numericals and graphs
₹199₹24920% off · all 13 chapters · instant PDF
Read free sample

What is inside the Chapter 5 notes →

Found a mistake or need help with a question? Message us on WhatsApp. Free study tips and new solutions: join our WhatsApp Channel.

Prices shown in Indian rupees. Show prices in: ₹ INR · US$ USD