Cambridge AS & A Level Chemistry 9701: 248 Common Mistakes That Lose Marks | Notes Bazar Skip to content
Smart Notes for Every Exam · instant PDF download after payment +91 92520 37565
Home › Cambridge › AS & A Level › Chemistry 9701 common mistakes
Free resource · Cambridge AS & A Level Chemistry 9701

AS & A Level Chemistry 9701: 248 common mistakes that lose marks

Most marks in Cambridge AS & A Level Chemistry are lost to the same habits every year: a missing unit, a vague word where the mark scheme wants a precise one, a step skipped in an explanation. Below are 248 mistakes from 37 chapters, each with the correct version. Read the chapter you are revising, then try its questions.

Notes Bazar is independent and not endorsed by or affiliated with Cambridge University Press & Assessment. Cambridge IGCSE, AS & A Level are trademarks of Cambridge University Press & Assessment.

  1. Atomic Structure
  2. Atoms, Molecules and Stoichiometry
  3. Chemical Bonding
  4. States of Matter
  5. Chemical Energetics
  6. Electrochemistry
  7. Equilibria
  8. Reaction Kinetics
  9. The Periodic Table: Chemical Periodicity
  10. Group 2
  11. Group 17
  12. Nitrogen and Sulfur
  13. An Introduction to AS Level Organic Chemistry
  14. Hydrocarbons
  15. Halogen Compounds
  16. Hydroxy Compounds
  17. Carbonyl Compounds
  18. Carboxylic Acids and Derivatives
  19. Nitrogen Compounds
  20. Polymerisation
  21. Organic Synthesis
  22. Analytical Techniques
  23. Chemical Energetics (A Level)
  24. Electrochemistry (A Level)
  25. Equilibria (A Level)
  26. Reaction Kinetics (A Level)
  27. Group 2 (A Level)
  28. Chemistry of Transition Elements
  29. An Introduction to A Level Organic Chemistry
  30. Hydrocarbons (A Level)
  31. Halogen Compounds (A Level)
  32. Hydroxy Compounds (A Level)
  33. Carboxylic Acids and Derivatives (A Level)
  34. Nitrogen Compounds (A Level)
  35. Polymerisation (A Level)
  36. Organic Synthesis (A Level)
  37. Analytical Techniques (A Level)

Chapter 1: Atomic Structure

  • Nucleon number is not neutron number: the nucleon (mass) number counts protons + neutrons. Examiners also report confusion of "nucleon" with "nuclear", and "isotope" with "isomer".
  • Missing state symbols in ionisation energy equations: every species is (g), including the ion, e.g. Te(g)→TeX+(g)+eX−\ce{Te(g) -> Te+(g) + e-}.
  • Wrong orbital labels: write the full label (1s, not just "s"), and stay within the elements H to Kr (4p is the highest sub-shell needed).
  • Transition-metal ions keeping 4s electrons: Cu²⁺ is [Ar] 3d⁹, not [Ar] 3d⁷ 4s²; remove 4s electrons first.
  • Contradictory explanations: for a decrease in IE down a group, giving "increase in nuclear charge" as the reason works against your own answer; say that the larger distance and extra shielding outweigh the extra nuclear charge.
  • Graphs of successive IEs with a dip: successive IEs always increase; a big jump is a steep rise, never a fall.
  • Forgetting spin-pair repulsion when explaining the fall from Group 15 to Group 16.
  • Definition of first IE without "gaseous" or "one mole": both are needed for the mark.

Chapter 2: Atoms, Molecules and Stoichiometry

  • Definitions: the standard is one twelfth of the mass of one atom of carbon-12, not "a mole of ¹²C" or "an atom of ¹²C"; relative atomic mass needs weighted mean/average.
  • Using 63 and 65 for the isotopes of copper when the question gives accurate isotopic masses: always use the data given.
  • Ion formulas: nitrate is NO₃⁻ (not NO₃²⁻ or NO₂⁻), so copper(II) nitrate is Cu(NO₃)₂; calcium compounds need Ca²⁺ (CaCl₂, not CaCl).
  • Titration calculations: forgetting to divide the titre by 1000; forgetting the × 10 scaling from 25.0 cm³ to 250 cm³; ignoring the 1 : 2 ratio of carbonate to HCl; assuming the solid was dissolved in 1 dm³ instead of 250 cm³.
  • Mass loss and residue mass confused in heating experiments.
  • Significant figures: giving 1 or 5 s.f.; early rounding in a multi-step calculation.
  • State symbols in ionic equations, especially CO₃²⁻(aq) and precipitates (s); using "=" instead of →.
  • Units: leaving a concentration in mol dm⁻³ when the question asks for g dm⁻³.

Chapter 3: Chemical Bonding

  • Bonding in metals called ionic: magnesium has metallic bonding (positive ions and delocalised electrons), not ions bonded to ions.
  • Breaking covalent bonds to explain boiling: when simple molecular substances (e.g. P₄ and S₈) melt or boil, only the intermolecular forces are overcome. Explain a difference with the type of force and the number of electrons (S₈ has more than P₄, so stronger id-id forces).
  • Hydrogen-bond diagrams: show the δ+ on H, δ− on N/O, the lone pair on the acceptor atom, and a straight X–H···Y line. Do not draw the hydrogen bond as a dative arrow, and do not draw two hydrogen bonds between one pair of NH₃ molecules.
  • Comparing hydrogen bonding: for water against ammonia, give both reasons: stronger hydrogen bonds (O more electronegative) and more hydrogen bonds per molecule.
  • σ bonds miscounted: every single bond, including each C–H, is one σ bond; a double bond has one σ and one π.
  • π bond description: "sideways overlap of p orbitals"; the σ bond in ethene forms by direct overlap of sp² hybrid orbitals.
  • VSEPR answers: state the number of bond pairs and lone pairs, say they repel to be as far apart as possible, and that lone pairs repel more than bond pairs.
  • Non-standard abbreviations (e.g. "IMF", "SE"): write the full term.

Chapter 4: States of Matter

  • "Ideal gas molecules have no mass": wrong. They have zero volume and no intermolecular forces.
  • Units in pV = nRT: forgetting to convert cm³ to m³ (× 10⁻⁶), dm³ to m³ (× 10⁻³), kPa to Pa (× 10³), or °C to K (+ 273). Do not add 273 to a temperature change; only to a temperature.
  • Missing "giant": describe copper as a giant metallic lattice and NaCl as a giant ionic lattice; the word "giant" earns the structure mark.
  • Confusing structures: SiCl₄ is simple molecular (a colourless liquid at room temperature), not giant covalent; SiO₂ is giant molecular.
  • Simple molecular substances: when they melt or boil, intermolecular forces are overcome, not covalent bonds.
  • Graphite: say the electrons are delocalised (one per carbon atom) and move along the layers; "free ions" or "free electrons from metal ions" score nothing.
  • Ionic compounds: do not refer to "molecules" of NaCl; and solid NaCl does not conduct because the ions cannot move (it has no free electrons at any time).

Chapter 5: Chemical Energetics

  • Definition of ΔHneut: "one mole of acid reacting with one mole of base" is wrong; it is the formation of one mole of water. Include standard conditions.
  • Wrong mass in q = mcΔT: using 1 g, the mass of the solid, or the masses of the reagents; use the total mass of solution (e.g. 175 g for 175 cm³).
  • Adding 273 to ΔT: a temperature change is the same in K and °C (7.8 °C = 7.8 K).
  • Not dividing by the moles (of water formed, or of the limiting reagent), or using the moles of the reagent in excess.
  • Missing sign: an exothermic ΔH must be given with a minus sign.
  • Bond energy calculations: misreading the table, using a wrong value for a correctly chosen bond, or forgetting a bond (e.g. the C–O bond); calculate "broken − made", not the other way round.
  • Weak acids: the less negative ΔHneut is because energy is needed to dissociate the weak acid fully; just saying "it is a weak acid" is not enough.
  • State symbols in thermochemical equations, e.g. BaSO₄(s) as a precipitate; H₂O(l) in combustion.

Chapter 6: Electrochemistry

  • Disproportionation answers without numbers: give the oxidation numbers, e.g. "Cl goes from 0 in Cl₂ to −1 in Cl⁻ and +1 in ClO⁻". Chlorine in ClO⁻ is +1, in ClO₃⁻ +5.
  • Electrons left in an overall equation or a redox equation that is not balanced for charge: always cancel the electrons and check the total charge on each side.
  • Fractions or mixtures of numbers and letters in "balance this equation" answers: use the smallest whole numbers.
  • Naming the agent: the oxidising agent in CuX2++Fe→Cu+FeX2+\ce{Cu^{2+} + Fe -> Cu + Fe^{2+}} is Cu²⁺, not "copper".
  • Wrong sign or Roman numeral: SO₄²⁻ is sulfate(VI), NaClO is sodium chlorate(I) (Cl +1, not −1); oxidation numbers need a sign, Roman numerals do not.
  • Titration scaling: forgetting the 1 : 5 (MnO₄⁻ : Fe²⁺) or 1 : 2 (I₂ : S₂O₃²⁻) ratios, or the dilution factor; leaving a concentration in mol dm⁻³ when g dm⁻³ is asked for.
  • Writing ions as atoms: species in a redox equation must be real ones (Cl₂ not Cl; I₂ not I).

Chapter 7: Equilibria

  • Pressure arguments without the reason: examiners want "the right-hand side has fewer gas molecules (moles of gas)", not just "the equilibrium shifts right".
  • Partial pressures: in 2 HI⇌HX2+IX2\ce{2HI <=> H2 + I2} from pure HI, pHI=ptotal−2pHX2p_{\ce{HI}} = p_\text{total} - 2p_{\ce{H2}}; many candidates forgot to subtract the iodine as well as the hydrogen.
  • Square roots: when [HX2]=[IX2][\ce{H2}] = [\ce{I2}], the unknown is found by a square root, [HI]2/Kc\sqrt{[\ce{HI}]^2 / K_c}; very few candidates did this. Halve the amounts when the volume is 2 dm³.
  • Catalysts: "increases the number of collisions" is wrong; a catalyst increases the rate of forward and reverse reactions equally and does not move the position of equilibrium.
  • Weak acids and ΔHneut: neutralising a weak acid releases less energy because some energy is used to complete its dissociation.
  • Ammonium ion: NHX4X+\ce{NH4+} is a proton donor, so it is a (weak) acid.
  • Using "=" or → for an equilibrium, or putting reactants on top of the KK expression.
  • Units of KK: work them out from the expression each time; never copy them from another reaction.

Chapter 8: Reaction Kinetics

  • "More collisions" instead of "more frequent collisions" or "a greater frequency of effective collisions". Examiners did not credit catalysts "increasing the number of collisions".
  • Vague catalyst statements: "the catalyst did not change" scores less than "the catalyst is regenerated (chemically unchanged) at the end".
  • Proportionality: "the rate goes up with concentration" is not enough; state that the graph is a straight line through the origin.
  • Boltzmann sketches: curve not starting at the origin, touching or crossing the energy axis, the higher-temperature peak drawn higher, or the two areas clearly different; unlabelled axes.
  • Temperature explanations that mention only faster collisions; the key point is that more molecules have E≥EAE \ge E_\text{A}.
  • Pathway diagrams: drawing EAE_\text{A} from the products, or showing the catalyst changing ΔH\Delta H.
  • Rounding rates too early, or quoting a rate without units.

Chapter 9: The Periodic Table: Chemical Periodicity

  • Formulas of the oxides: many candidates know the chlorides better than the oxides; learn Na₂O, MgO, Al₂O₃, SiO₂, P₄O₁₀, SO₂, SO₃ (ratio O : element 0.5, 1, 1.5, 2, 2.5, 2 or 3).
  • Writing PX2OX5\ce{P2O5} or PClX3\ce{PCl3} when the question asks for the product with excess oxygen or chlorine.
  • Melting points: saying covalent bonds break when P₄, S₈ or Cl₂ melts; only intermolecular forces are overcome. For Si, say "many strong covalent bonds" in a giant structure.
  • Metals: explaining the increase from Na to Al without mentioning the charge of the cation and the number of delocalised electrons.
  • pH values: giving pH 7 for AlClX3\ce{AlCl3} or MgO\ce{MgO}, or a pH for SiO₂ other than 7.
  • Amphoteric: giving only one equation, or using water instead of NaOH as the base.
  • Using "=" in equations, or leaving them unbalanced; use → (or ⇌ for SOX2+HX2O\ce{SO2 + H2O}).

Chapter 10: Group 2

  • Giving the wrong state symbol for barium sulfate: it is a precipitate, BaSOX4(s)\ce{BaSO4(s)}.
  • Describing the bonding in magnesium metal as ionic; it is metallic.
  • Writing formulas such as CaCl or CaNO₃: Group 2 ions are always 2+, so CaClX2\ce{CaCl2}, Ca(NOX3)X2\ce{Ca(NO3)2}.
  • Giving the Group 1 nitrate equation (MNOX3→MNOX2+OX2\ce{MNO3 -> MNO2 + O2} type) for Group 2 nitrates; Group 2 nitrates give the oxide, NOX2\ce{NO2} and OX2\ce{O2}.
  • Mixing up the two solubility trends: hydroxides become more soluble, sulfates less soluble, down the group.
  • Not recognising a Group 2 metal in a calculation: if MCOX3\ce{MCO3} or MClX2\ce{MCl2} fits, M is probably in Group 2. Give ArA_r of M, not MrM_r of the compound, when asked for M.
  • Saying calcium "dissolves completely" in water: the cloudiness is undissolved Ca(OH)X2\ce{Ca(OH)2}.

Chapter 11: Group 17

  • Disproportionation: defining it without quoting the oxidation numbers of chlorine in the reactant and both products; giving +1 instead of +5 for the hot reaction.
  • Writing equations with Cl instead of Cl₂, or making O₂ and HCl from chlorine and NaOH.
  • Not knowing the hot NaOH equation: 3 ClX2+6 NaOH→5 NaCl+NaClOX3+3 HX2O\ce{3Cl2 + 6NaOH -> 5NaCl + NaClO3 + 3H2O}.
  • Thinking HI can be made like HCl from NaI and concentrated H₂SO₄; HI is oxidised to I₂ and the acid reduced to SO₂, S and H₂S.
  • Explaining volatility by "breaking bonds" or by bond strength; it depends on the id–id forces between molecules.
  • Explaining the stability of HX by the strength of the X–X bond; it depends on the H–X bond energy.
  • Writing the halide (bromide) when the halogen (bromine) is asked for, or the reverse.

Chapter 12: Nitrogen and Sulfur

  • Lack of reactivity of N₂: giving only "strong bond" without the value or without "non-polar / no dipole"; or saying the bond is ionic.
  • Ammonium ion: missing that NH₄⁺ is a proton donor (a weak acid); examiners found many candidates did not realise this.
  • Shape: calling NH₄⁺ trigonal pyramidal (that is NH₃) or giving 107°.
  • Source of NOₓ in engines: the nitrogen comes from the air, not from the fuel; the high temperature makes it react.
  • Catalytic converter: writing equations that are not balanced, or that make NO from N₂ instead of removing it.
  • Catalytic role of NO₂: not showing that NO₂ is regenerated; vague phrases like "NO₂ helps the reaction".
  • Confusing photochemical smog (NOₓ + hydrocarbons + sunlight → PAN, ozone) with acid rain (SO₂, NOₓ + water).

Chapter 13: An Introduction to AS Level Organic Chemistry

  • Counting σ bonds: examiners reported 7, 9 and 10 as common wrong counts in one question: count every bond, including each C–H and O–H, and remember a double bond contains one σ.
  • Curly arrows: arrows pointing the wrong way, or starting at an atom or an H rather than at a lone pair or a bond, score zero.
  • Mixing up words: "isotope" for "isomer", "nucleon" for "nuclear"; write "nucleophile" and "electrophile" precisely.
  • 3D mirror images: drawing two identical bond types (two wedges) at 180°, or a "mirror image" that is the same molecule.
  • Missed isomers: forgetting positional isomers (e.g. 1,1- and 1,2-dichloroethane) or forgetting that a ring compound can show both cis/trans and optical isomerism.
  • Names: leaving the "e" out of propanenitrile; numbering from the wrong end; not putting substituents in alphabetical order.

Chapter 14: Hydrocarbons

  • Propagation and termination: examiners found these much weaker than initiation. Each propagation step must have one radical on each side; a termination step has two radicals on the left only. Do not write H• in a propagation step.
  • Incomplete combustion: give carbon (soot) and unburnt hydrocarbons as well as CO.
  • Oxides of nitrogen: they form from N2 in the air, not from nitrogen in the fuel; and a catalytic converter turns NO into N2, not NO2.
  • Curly arrows: examiners saw arrows pointing the wrong way and arrows that did not start at the bond being broken or the lone pair being used. The first arrow starts at the C=C π bond.
  • Inductive effect: explain using the carbocation intermediate, not the product (not "propan-2-ol is more stable").
  • Hydrogenation: only C=C is reduced by H2/Ni; a COOH group in the same molecule is unchanged.
  • σ bond: formed by end-on overlap (of sp² orbitals in C=C); π by sideways overlap of p orbitals.

Chapter 15: Halogen Compounds

  • Mixing up reactions: examiners saw reagents for making hydroxynitriles from carbonyls (HCN/KCN) given for halogenoalkane → nitrile (KCN in ethanol, heat).
  • Names: "propionitrile" or "ethyl cyanide" for propanenitrile, or missing the "e" in propanenitrile.
  • Conditions for NH3: omitting heat, pressure (sealed tube) or the ethanol solvent; omitting aqueous for NaOH substitution or ethanolic for elimination.
  • Curly arrows: the arrow must start on a lone pair of the nucleophile and end at the δ+ carbon; a second arrow from the C–X bond to X. Show δ+/δ−, the negative charge and the lone pair on OH⁻.
  • Bond polarity versus strength: do not explain the AgNO3 order by polarity; it is the C–X bond energy.
  • SN1 intermediate: it is a carbocation; the SN2 transition state is not an intermediate and is drawn in square brackets with partial bonds.

Chapter 16: Hydroxy Compounds

  • Conditions for full oxidation: examiners stressed that "heat under reflux" is the essential condition for complete oxidation to a carboxylic acid; "heat" alone is not enough. Distillation is for the aldehyde.
  • Iodoform test: link the yellow precipitate with alkaline I2(aq) to a CH3CH(OH)– group; check each –OH in a diol separately (a diol with a CH3CH(OH)– end gives the test).
  • Reduction equations: when the question asks for molecular formulas, use them, with [H] balanced.
  • Reagent choice: acidified dichromate oxidises any 1° or 2° –OH in the molecule, so it cannot be used to oxidise one group selectively; NaBH4 does not reduce –COOH.
  • Colour changes: give both colours (orange → green), not just "green".
  • Ester names: the alcohol part comes first (ethyl), the acid part second (-oate).

Chapter 17: Carbonyl Compounds

  • Mechanism (HCN): examiners found the δ+/δ− on C=O often missing; the arrow from CN⁻ must start at the lone pair on the carbon of CN⁻; a positively charged intermediate is wrong (it is O⁻); an arrow from H⁺ to O⁻ is wrong (the arrow goes from the O⁻ lone pair to H).
  • Two carbonyl compounds: do not call both "aldehydes" or both "ketones" when the data show one of each; "carbonyl compound" covers both.
  • Conditions: distillation for the aldehyde, not reflux; "warm" for Tollens' and Fehling's.
  • Reagent mix-up: HCN/KCN (carbonyl → hydroxynitrile) is a different reaction from KCN in ethanol (halogenoalkane → nitrile).
  • Iodoform products: state both: CHI3 (yellow precipitate) and RCO2−; and remember that CH3CH(OH)– alcohols also give it.
  • Results for a ketoacid or diol: check each functional group separately (e.g. a methyl ketone that is also an acid gives effervescence with carbonate, an orange precipitate with 2,4-DNPH and a yellow precipitate with alkaline I2).

Chapter 18: Carboxylic Acids and Derivatives

  • Acid hydrolysis: examiners noted that "dilute" or "(aq)" was often left off the named acid: write dilute HCl(aq) or dilute H2SO4, and heat.
  • Fats: all three ester groups are hydrolysed and the alcohol formed is propane-1,2,3-triol; answers showing only one group hydrolysed lose credit.
  • Reaction type: esterification is a condensation reaction (also accept "esterification"); hydrolysis is the reverse.
  • Salt formulas: calcium and magnesium salts contain two carboxylate ions: (CH3COO)2Ca, not CH3COOCa.
  • Full oxidation: to make the acid from an alcohol, "heat under reflux" with excess oxidant is the essential condition.
  • IR spectra (Ch 22 link): the ester has no broad O–H absorption; quoting C–H at 2850–2950 cm⁻¹ does not distinguish an acid from an ester.

Chapter 19: Nitrogen Compounds

  • Mixing up the cyanide reagents (examiner report, June 2023): HCN with KCN catalyst is for carbonyl compounds → hydroxynitriles; KCN in ethanol and heat is for halogenoalkanes → nitriles.
  • Names: "propionitrile" or "ethyl cyanide" for CH₃CH₂CN; omitting the "e" in propanenitrile. Count the CN carbon in the stem.
  • Mechanism of HCN addition (examiner report): no δ+/δ− on the C=O bond; the arrow not starting from the lone pair on the C of CN⁻; inventing a positive intermediate; an arrow from H⁺ to O⁻ instead of from O⁻ to H.
  • Drawing enantiomers: two bonds of the same type (two wedges or two plain lines) drawn at 180° to each other; the pair must be clear 3D mirror images.
  • Conditions for the amine: leaving out the heat, the solvent (ethanol) or the sealed tube; forgetting that NH₃ must be in excess.
  • Equations: unbalanced hydrolysis (2H₂O are needed for acid hydrolysis); writing the acid, not the salt, as the direct product of alkaline hydrolysis.

Chapter 20: Polymerisation

  • Side groups in the main chain: drawing poly(propene) as –CH₂–CH₂–CH₂–. Only the two C=C carbons are in the chain.
  • Leaving the double bond in the repeat unit, or drawing a repeat unit with no continuation bonds through the brackets (examiner report, June 2023: the single repeat unit from CH₂=CHCN was asked for).
  • Drawing two repeat units when one is asked for, or forgetting the nn.
  • Wrong split of a copolymer section: always split into two-carbon pairs that each come from an alkene.
  • Vague disposal answers such as "they are bad for the environment". Say why: non-biodegradable because of strong non-polar C–C/C–H bonds; combustion gives CO₂ (greenhouse gas), CO (toxic) and, from PVC, HCl (toxic, acidic).
  • Calling poly(alkene)s "unsaturated": the polymer is saturated; only the monomer has C=C.

Chapter 21: Organic Synthesis

  • Missing conditions: "K₂Cr₂O₇" without H⁺, or without "distil" (for an aldehyde) / "reflux" (for an acid); NaOH without "aqueous" or "ethanol"; NH₃ without excess, ethanol and pressure. The examiner report (June 2023) noted that "heat under reflux" was the essential condition for complete oxidation to the acid.
  • Wrong chain length: oxidising ethanol when a three-carbon acid is needed. Count carbons first.
  • Using the molecular formula in an equation when asked for one; and the reverse, giving an ambiguous molecular formula where a structural formula is needed (examiner report: "very few candidates used molecular formula, as required").
  • Overlooking a group: in a multifunctional molecule, the Examiner noted that candidates missed that a diol with a CH₃CH(OH)– unit gives the iodoform reaction. Check every reagent against every group.
  • NaBH₄ and C=C: NaBH₄ and LiAlH₄ do not reduce C=C; H₂/Ni does.
  • By-products: name them as compounds (e.g. "1-bromobutane"), not as "an isomer".

Chapter 22: Analytical Techniques

  • Naming the functional group instead of the bond (examiner report, June 2023: for CH₂=CHCN candidates should identify the C≡N and C=C bonds), or calling a C≡N or C=C absorption "C=O".
  • Mixing the two O–H ranges: 3200–3600 cm⁻¹ for alcohols, 2500–3000 cm⁻¹ (very broad) for carboxylic acids.
  • Using the fingerprint region to identify functional groups; it identifies whole molecules by matching.
  • Fragments without charges (writing CH₃CO instead of CH₃CO⁺), or including the radical as a detected peak.
  • Taking the base peak as M⁺. M⁺ is at the highest m/e (apart from the small M+1/M+2 lines).
  • M+1 formula upside down or not rounding nn to a whole number; Ar given to too many significant figures.

Chapter 23: Chemical Energetics (A Level)

  • Definitions without "gaseous" or without "one mole": lattice energy is formed from gaseous ions; electron affinity uses gaseous atoms to give gaseous 1− ions.
  • Lattice energy written the wrong way round (as dissociation). In Cambridge's definition it is exothermic (formation of the lattice).
  • Forgetting multiples in Born–Haber cycles: 2 × ΔHat(Cl) and 2 × EA(Cl) for MgCl₂; IE₁ + IE₂ for Mg²⁺; EA₁ + EA₂ for O²⁻.
  • Using the bond energy for ΔHat of a diatomic element: ΔHat(Cl) is half of E(Cl–Cl).
  • Units in ΔG = ΔH − TΔS: mixing J and kJ gives answers 1000 times too large; also give T in kelvin.
  • Explaining trends by "electronegativity" for EA or lattice energy; use charge, ionic/atomic radius, distance and shielding.
  • Saying ΔG < 0 means the reaction is fast; feasibility is about energy, not rate.

Chapter 24: Electrochemistry (A Level)

  • Incomplete definitions of E⦵: leaving out "relative to the standard hydrogen electrode" or the standard conditions (298 K, 1.00 mol dm⁻³, 101 kPa).
  • Multiplying E⦵ values when balancing half-equations. E⦵ is a property per electron transfer; it is never scaled.
  • Wrong sign for E⦵cell: always subtract the less positive from the more positive value for the cell; for feasibility use E(reduced species' couple) − E(oxidised species' couple).
  • Using KCl in a salt bridge with Ag⁺ solutions (AgCl precipitates); use KNO₃.
  • Forgetting z in Nernst or putting the concentration ratio upside down: it is [oxidised] ÷ [reduced].
  • Electrolysis of aqueous solutions: writing Na at the cathode for NaCl(aq); forgetting that sulfate is not oxidised; ignoring the effect of concentration on chloride.
  • Units in ΔG = −nEF: the answer is in J mol⁻¹; divide by 1000 for kJ mol⁻¹.

Chapter 25: Equilibria (A Level)

  • pH definition: writing −log H⁺ without the square brackets; pH = −log[H⁺] (examiner report).
  • Significant figures: pH answers must follow the instruction, often to 3 s.f. or 2 d.p.; one significant figure is never enough.
  • Buffers: saying a buffer "keeps the pH constant"; it resists changes in pH. Show the equations, using the species present in large amounts (HA and A⁻), not minor ions.
  • Strong alkalis: forgetting the factor of 2 for Ba(OH)₂ or Ca(OH)₂, or using Kw=[H+]2K_w = [\mathrm{H^+}]^2 for a solution that is not pure water.
  • KspK_{sp}: not doubling [Ag⁺] for Ag₂CrO₄ (or [X⁻] for MX₂) and then not squaring it; using concentrations before mixing when testing for a precipitate; giving wrong units.
  • Partition: using a measuring cylinder or burette to take the 10.0 cm³ sample (use a volumetric pipette); dividing moles by the titre volume instead of the sample volume.

Chapter 26: Reaction Kinetics (A Level)

  • Order definition: "the power of the concentration of a reactant" without "in the rate equation" (examiner report).
  • Units of kk: keep the same time unit as the rate (min⁻¹ if the rate is per minute); work units out by cancelling.
  • Ratios: if [H⁺] changes by a factor of 10 and the order in H⁺ is 2, the rate changes by 10² = 100, not 10.
  • Rate–concentration graphs for first and second order start at (0, 0); a second-order curve gets steeper but never turns back.
  • RDS explanations: give the reason from the rate equation, e.g. "H₂O₂ and I⁻ are in the rate equation but H⁺ is not, so step 1 is the RDS".
  • Intermediate or catalyst? An intermediate is made then used up; a catalyst is used then re-formed. Do not call an intermediate a catalyst.
  • Catalyst steps: write full balanced equations (not half-equations), each between two ions, balanced for charge, with no spectator species.
  • Catalytic converters: name all three metals: platinum, palladium and rhodium.

Chapter 27: Group 2 (A Level)

  • Polarisation the wrong way round: the cation polarises the anion. "Polarisation of the cation", or "the anion polarises the cation", earns nothing (examiner report).
  • Missing steps: a full answer links ionic radius → charge density → polarisation of the (large) anion → weakening of the C–O (or N–O) bond → decomposition temperature.
  • Curly arrows: they must start at a lone pair or a bond and end at an atom or bond; CO₃²⁻ → CO₂ + O²⁻ needs two arrows. Do not end an arrow on the C atom or break the C=O bond.
  • Solubility explanations: compare the relative changes of lattice energy and hydration enthalpy; saying only "lattice energy decreases" is not enough. Refer to the size of the anion (large SO₄²⁻, small OH⁻).
  • Hydration of two anions: for M(OH)₂ (or MBr₂) use 2 × ΔHhyd\Delta H_{hyd}(anion), and remember a calculated value may be for 2 mol of ions.
  • Definitions: lattice energy forms 1 mol of the ionic compound from its gaseous ions; do not start from 1 mol of gaseous ions.

Chapter 28: Chemistry of Transition Elements

  • Formulae: writing [Cu(NH₃)₆]²⁺ instead of [Cu(NH₃)₄(H₂O)₂]²⁺, or [Co(OH)₆]⁴⁻; use square brackets, not round ones (examiner report).
  • Colours: [Co(NH₃)₆]²⁺ is brown and [CoCl₄]²⁻ is blue (neither is yellow); "yellow" belongs to [CuCl₄]²⁻.
  • Definitions: a complex has a central metal atom/ion; coordination number counts dative bonds to the metal, not the bonds a ligand forms (that is denticity). Learn the polydentate ligand definition.
  • "Geometry" means the shape with bond angles (e.g. octahedral, 90°); a complex with six dative bonds is octahedral, never tetrahedral.
  • Colour explanations: say the d orbitals split, an electron is promoted from lower to higher d orbitals absorbing visible light of a particular frequency, and the complementary colour is seen; two complexes differ because they have different ΔE.
  • Calculations: Cr₂(SO₄)₃ contains two Cr³⁺ per formula unit; annotate each step. Ligand exchange is not redox.
  • Isomers: drawing the same isomer twice in two orientations; for M(AA)₂B₂ draw trans, then cis and its mirror image.

Chapter 29: An Introduction to A Level Organic Chemistry

  • Benzene bonding: answer the question asked: how orbital overlap gives σ bonds (end-on overlap of sp² orbitals) and π bonds (sideways overlap of p orbitals), not just "it has delocalised electrons" (examiner report).
  • Displayed formulae of rings: not expected for a benzene ring; but every other bond in a displayed formula, including O–H and N–H, must be drawn.
  • Names: use the parent acid and alcohol names for esters (ethyl 3-chloropropanoate); start ring numbering at the carbon with the principal group.
  • Primary/secondary/tertiary amines and amides refer to N, not to the carbon atom.
  • Chiral drugs: vague answers such as "higher yield" or "expensive" score nothing; say why: no need to separate a racemic mixture, smaller dose, fewer side effects; catalyst costly to develop and specific to one reaction.
  • Racemic mixture: equal amounts of the two enantiomers, so no net rotation; it still contains optically active molecules.

Chapter 30: Hydrocarbons (A Level)

  • Curly arrows: the first arrow must start inside the hexagon and go to the N of NO₂⁺ (or to Br); the second must start on the C–H bond, not on the H (examiner report).
  • Intermediate: the partial ring must not include the sp³ carbon, the + charge goes inside the horseshoe, not on the sp³ carbon.
  • Products: the final step forms H⁺, which then reacts with HSO₄⁻ or AlX₄⁻; do not show HBr forming directly from the intermediate.
  • Conditions: nitration needs concentrated HNO₃ and concentrated H₂SO₄; "acid" alone is not enough. Sn/HCl is a reactant, not a catalyst, when reducing nitrobenzene (Chapter 34).
  • Directing effects: –NO₂ directs to C3, so nitrobenzene + an alkyl group gives a 3-substituted product, not a 4-substituted one. Plan the order of steps carefully.
  • Reaction types: hydrogenation of benzene is addition (reduction), not electrophilic substitution; side-chain chlorination in UV is free-radical substitution.

Chapter 31: Halogen Compounds (A Level)

  • Only one reason for the lack of reactivity of chlorobenzene: examiners report that few candidates gave both points. Give the p-orbital overlap (stronger C–Cl) and the repulsion of the nucleophile by the π electrons.
  • Curly arrows in the mechanism: the first arrow must start inside the hexagon (from the delocalised electrons) and go to the electrophile; the second must start on the C–H bond, not on the H atom.
  • Wrong intermediate: the horseshoe must not include the sp³ carbon, and the + charge goes inside the horseshoe, not on the sp³ carbon.
  • HCl as the direct product of the mechanism: the ring loses H⁺, which then reacts with AlCl₄⁻.
  • Conditions mixed up: UV light with methylbenzene gives side-chain substitution, not 2- and 4-chloromethylbenzene. AlCl₃ must be anhydrous.
  • Explaining reactivity by polarity: the order of halogenoalkane hydrolysis is decided by C–X bond strength; for C–Br versus C–Cl say that Br is a larger atom, so the bond is longer and weaker.

Chapter 32: Hydroxy Compounds (A Level)

  • Half an explanation of reactivity: examiners want both "the O lone pair is delocalised into the ring" and "this increases the electron density of the ring, so the electrophile is attracted/polarised more".
  • Acidity without the oxygen: say what happens to the charge density on the oxygen of the anion (lowered in phenoxide, raised in ethoxide), not only "the ring is delocalised".
  • H⁺ instead of H₂ in the equation for phenol with sodium: the product is H₂ gas.
  • Nitration conditions copied from benzene: conc. HNO₃ or added H₂SO₄ is wrong for phenol; use dilute HNO₃ at room temperature.
  • Azo coupling with the diazonium salt missing: the reagents are the benzenediazonium salt and the phenol in NaOH(aq), below 10 °C.
  • Tribromophenol formula: it is C₆H₂Br₃OH (three ring H replaced), and 3 mol of HBr form, not 1.
  • Saying phenol "fizzes with carbonates": phenol is too weak an acid to release CO₂.

Chapter 33: Carboxylic Acids and Derivatives (A Level)

  • Wrong formula for the acid or wrong product: examiners reported ethanoic acid drawn incorrectly and products such as "CH₃COOBr" or H₂O when making an acyl halide; the by-products are POCl₃ + HCl, H₃PO₃, or SO₂ + HCl.
  • Hydrolysis order explained vaguely: name the two electronegative atoms on the acyl carbon and the effect on its δ+ charge; for C–Br versus C–Cl, say Br is larger, so the bond is weaker, and refer to bond strength.
  • Mechanism arrows: the first arrow starts at a lone pair on O or N and goes to the carbonyl C; a second arrow from the C=O π bond to O; then the C=O re-forms and the arrow to Cl⁻ starts on the C–Cl bond. Show the + charge on O or N in the intermediate.
  • Acidity of chloro acids: "Cl is electronegative" alone is not enough: say it withdraws electrons and so disperses the negative charge of the anion / weakens the O–H bond.
  • Benzoic acid from methylbenzene with acidified dichromate: the syllabus route is hot alkaline KMnO₄ then dilute acid.
  • Forgetting that methanoic acid gives a positive Tollens' or Fehling's test, unlike other carboxylic acids.

Chapter 34: Nitrogen Compounds (A Level)

  • "Attracts a proton": examiners do not accept this. Basicity is the ability of the N lone pair to accept a proton (form a dative bond to H⁺).
  • Amide basicity: say the N lone pair is delocalised into the C=O group, so it is not available.
  • Tin as a catalyst: Sn is a reactant (reducing agent) in the reduction of nitrobenzene. Also, the –NO₂ group directs to the 3-position, which matters when planning routes.
  • Wrong forms at high pH: showing –COOH at high pH. At high pH it is –COO⁻; at low pH it is –NH₃⁺ and –COOH.
  • Dipeptide ends: the terminal groups of a dipeptide are –NH₂ and –COOH; write "H₂N–" or "NH₂–", never "2HN–". Draw only two amino acid units when a dipeptide is asked for.
  • Electrophoresis directions: an acidic amino acid such as Glu (and peptides containing it) moves to the positive electrode at pH 6, not the negative.
  • Spelling counts in technical words: "zwitterion", "isoelectric".

Chapter 35: Polymerisation (A Level)

  • "Esterification" or "substitution" given as the type of polymerisation: the answer is condensation polymerisation.
  • Repeat unit errors: missing continuation bonds, an –OH or –H left on the end of the repeat unit, or the wrong number of CH₂ groups. Draw every amide link as –C(=O)–N(H)– and check the rest of the diagram carefully.
  • Too many units: a repeat unit of a diol/diacid polymer contains one residue of each monomer, not two.
  • Small molecule wrong: a dioyl dichloride gives HCl, not H₂O; count 2n molecules for n of each monomer.
  • Hydrolysis products in the wrong form: in acid, amines are protonated (–NH₃⁺); in alkali, acids are carboxylate ions (–COO⁻). Make sure every link is hydrolysed, not just one.
  • Calling poly(alkenes) "unreactive" without the reason: say the C–C and C–H bonds are non-polar (and strong), so they are not hydrolysed.

Chapter 36: Organic Synthesis (A Level)

  • Wrong reagent for a step: examiners report HCN used instead of KCN in ethanol for halogenoalkane → nitrile, and the ethanol solvent left out; NaBH₄ given to reduce a nitro group or a nitrile (use Sn/conc. HCl or LiAlH₄/H₂–Ni).
  • Concentration omitted: nitration needs concentrated HNO₃ and H₂SO₄; "dilute" or no description loses the mark. Give dilute acid for hydrolysis.
  • Inorganic product given when the structure of the organic product is asked (e.g. HBr), or the wrong organic product (e.g. C₆H₅CH₂Cl from a ring chlorination).
  • Reaction type confused: reduction of an alkene ring with H₂ is "reduction/hydrogenation" (addition), not "electrophilic substitution".
  • Hydrolysis products in the wrong form: in acid, amines are protonated (–NH₃⁺); in alkali, acids are –COO⁻. Hydrolyse every ester or amide group.
  • Stoichiometry: reduction of a nitrile needs 2H₂; oxidations and reductions can be balanced with [O] and [H].

Chapter 37: Analytical Techniques (A Level)

  • Spelling of splitting patterns: "duplet", "quadret" or "quartret" earn no credit: write singlet, doublet, triplet, quartet, multiplet.
  • Peak areas reversed or splitting assigned from the proton's own number of H: splitting depends on the H on the adjacent carbon (n + 1).
  • H/D exchange with the wrong reagent: it is D₂O that exchanges with O–H/N–H; CDCl₃ is only the solvent. Answer the question asked (e.g. the reason for using CDCl₃, not what D₂O does).
  • Carbon-13 counts: look carefully for symmetry; for substituted benzene rings count each different ring carbon (including the carbons bearing substituents).
  • Rf calculated upside down or measured from the bottom of the plate instead of the baseline.
  • GLC composition from heights instead of areas.
  • Explaining Rf with only one idea: refer to both interaction (adsorption) with the stationary phase and solubility in the mobile phase.
Want the full chapter, not just the mistakes? Our AS & A Level Chemistry 9701 notes cover every syllabus statement with worked examples, 20 MCQs per chapter and original exam-style questions with full mark schemes.

Prices shown in Indian rupees. Show prices in: ₹ INR · US$ USD