NCERT Solutions · Class 11 Economics · NCERT Indian Economic Development and Statistics for Economics Statistics for Economics · Chapter 3
Chapter 3: Organisation of Data (Organisation of Data)
NCERT solutions for Class 11 Economics Statistics for Economics Chapter 3: Organisation of Data (2026-27). Answers to all exercises and in-text activities on classification, variables, frequency distributions, class intervals and the frequency array. All 24 questions are answered, with the key answer highlighted.
Which of the following alternatives is true? The class midpoint is equal to:
The average of the upper class limit and the lower class limit.
The product of upper class limit and the lower class limit.
The ratio of the upper class limit and the lower class limit.
None of the above.
Solution
(a) The average of the upper class limit and the lower class limit. Class mark = (Upper class limit + Lower class limit)/2. For the class 60-70 it is (70 + 60)/2 = 65.
(a) The average of the upper class limit and the lower class limit
The frequency distribution of two variables is known as
Univariate Distribution
Bivariate Distribution
Multivariate Distribution
None of the above
Solution
(b) Bivariate Distribution. A bivariate frequency distribution is the frequency distribution of two variables, for example sales and advertisement expenditure of firms.
Statistical calculations in classified data are based on
the actual values of observations
the upper class limits
the lower class limits
the class midpoints
Solution
(d) the class midpoints. Once data are grouped into classes, all values in a class are taken to be equal to its class mark, so further calculations use class marks and not the individual observations.
Can there be any advantage in classifying things? Explain with an example from your daily life.
Solution
Yes. Classification means arranging things into groups or classes on some criterion. It saves time and effort, because a required item can be found by searching only its group, and it brings order, makes comparison easy and helps in drawing inferences.
Example: a student arranges schoolbooks subject-wise as History, Geography, Mathematics and Science. When a history book is needed, only the group "History" is searched and the entire collection need not be gone through. In the same way the kabadiwallah groups his junk into newspapers, plastics, glass and metals, so a particular item is easy to find when a buyer asks for it. For classification to serve its purpose, items of another kind must not be placed in a group.
What is a variable? Distinguish between a discrete and a continuous variable.
Solution
A variable is a characteristic whose value changes from observation to observation, for example the production of food grains in different years or the marks of different students. Variables are generally represented by the letters X, Y or Z, and each value of a variable is an observation.
Basis
Continuous variable
Discrete variable
Values taken
Can take any numerical value in a range: whole numbers, fractions and values that are not exact fractions.
Takes only certain values; changes by finite "jumps" and takes no value between two adjacent values.
Gradations
Can be broken into infinite gradations.
Values in between are not possible.
Examples
Height, weight, time, distance, rainfall.
Number of students in a class, number of cars on the road, size of a household.
Explain the 'exclusive' and 'inclusive' methods used in classification of data.
Solution
Exclusive method. An item equal to the upper limit of a class is excluded from that class and put in the next class. The upper class limit of one class is the lower class limit of the next. Example: 0-10, 10-20, 20-30, ..., 90-100. A value of 10 goes into the class 10-20 (upper limit excluded). Sometimes the rule is reversed so that the lower limit is excluded; this must be decided in advance. This method is used for continuous variables, with classes understood as "10 and above and under 20".
Inclusive method. Values equal to both the lower and the upper limit of a class are included in that same class. Example: 0-10, 11-20, 21-30, ..., 91-100. Here 10 goes into the class 0-10 and 20 into 11-20. There is a gap between the upper limit of a class and the lower limit of the next, so for a continuous variable an adjustment is made: 0.5 is subtracted from all lower limits and added to all upper limits (for example 799.5-899.5, 899.5-999.5), which restores continuity.
Use the data in Table 3.2 that relate to monthly household expenditure (in Rs) on food of 50 households and
Obtain the range of monthly household expenditure on food.
Divide the range into appropriate number of class intervals and obtain the frequency distribution of expenditure.
Find the number of households whose monthly expenditure on food is (a) less than Rs 2000 (b) more than Rs 3000 (c) between Rs 1500 and Rs 2500
Solution
(i) Range. Range = Largest value - Smallest value. From Table 3.2 the largest expenditure is Rs 5,090 and the smallest is Rs 1,007.
Range = 5,090 - 1,007 = Rs 4,083.
(ii) Frequency distribution. The number of classes should be between 6 and 15. Taking an equal class interval of Rs 500 and the exclusive method (a value equal to a class limit is put in the higher class), the number of classes is about 4,083/500 = 8.2, so 9 classes starting from Rs 1,000 are needed. Counting the 50 values class by class:
Monthly expenditure on food (Rs)
Number of households
1000-1500
20
1500-2000
13
2000-2500
6
2500-3000
5
3000-3500
2
3500-4000
1
4000-4500
2
4500-5000
0
5000-5500
1
Total
50
Check: 20 + 13 + 6 + 5 + 2 + 1 + 2 + 0 + 1 = 50, which equals the number of households.
(iii) Number of households.
(a) Less than Rs 2,000: 20 + 13 = 33 households.
(b) More than Rs 3,000: 2 + 1 + 2 + 0 + 1 = 6 households (Rs 3,222, 3,473, 3,676, 4,248, 4,439 and 5,090).
(c) Between Rs 1,500 and Rs 2,500: 13 + 6 = 19 households (no household spends exactly Rs 1,500 or Rs 2,500, so the limits do not affect the count).
In a city 45 families were surveyed for the number of Cell phones they used. Prepare a frequency array based on their replies as recorded below. 1 3 2 2 2 2 1 2 1 2 2 3 3 3 3 3 3 2 3 2 2 6 1 6 2 1 5 1 5 3 2 4 2 7 4 2 4 3 4 2 0 3 1 4 3
Solution
The number of cell phones is a discrete variable, so a frequency array is prepared by counting how many times each value occurs (tally marking).
Number of cell phones
Number of families (frequency)
0
1
1
7
2
15
3
12
4
5
5
2
6
2
7
1
Total
45
Check: 1 + 7 + 15 + 12 + 5 + 2 + 2 + 1 = 45.
Frequency array: 0 (1), 1 (7), 2 (15), 3 (12), 4 (5), 5 (2), 6 (2), 7 (1); total 45
When raw data are grouped into a frequency distribution, they become concise and easy to understand, but the individual observations are no longer visible. The table shows only the number of items in each class and not their actual values. All values in a class are assumed to be equal to its class mark, and further calculations use only class marks. This is the loss of information.
Example: the class 20-30 in the marks distribution contains the six observations 25, 25, 20, 22, 25 and 28, but the frequency distribution shows only that the frequency is 6, and all six are treated as 25. The gain in making sense of the data is greater than this loss.
Do you agree that classified data is better than raw data? Why?
Solution
Yes, for the purpose of analysis, although classified data lose some detail. Reasons:
Raw data are disorganised, large and cumbersome. Even finding the highest mark or the average expenditure of 50 households is tedious, and more so for thousands of observations.
Classification summarises the data and makes them comprehensible; facts of similar characteristics are put together, so they are easy to locate and compare, and inferences are drawn without difficulty.
Raw data do not yield easily to statistical methods, while classified data (for example the frequency distribution) can be used for further calculations and presented in graphs.
The only drawback is loss of information, but the gain in understanding more than makes up for it.
Prepare a frequency distribution by inclusive method taking class interval of 7 from the following data. 28 17 15 22 29 21 23 27 18 12 7 2 9 4 1 8 3 10 5 20 16 12 8 4 33 27 21 15 3 36 27 18 9 2 4 6 32 31 29 18 14 13 15 11 9 7 1 5 37 32 28 26 24 20 19 25 19 20 6 9
Solution
Number of observations = 14 + 14 + 14 + 14 + 4 = 60. Smallest value = 1, largest value = 37, range = 36. With a class interval of 7 and the inclusive method, the classes start at 1: 1-7, 8-14, 15-21, 22-28, 29-35 and 36-42. Both limits of a class belong to that class. Counting the observations in each class:
"The quick brown fox jumps over the lazy dog" Examine the above sentence carefully and note the numbers of letters in each word. Treating the number of letters as a variable, prepare a frequency array for this data.
Solution
Number of letters in each word: The = 3, quick = 5, brown = 5, fox = 3, jumps = 5, over = 4, the = 3, lazy = 4, dog = 3. There are 9 words. The number of letters is a discrete variable, so a frequency array is made.
The objects around can be grouped as either living or non-living. Is it a quantitative classification?
Solution
No. Living and non-living are attributes (qualities) that cannot be measured in numbers. Grouping is done on the presence or absence of the attribute "life", so this is a qualitative classification.
Express the values of frequency of Example 4 as proportion or percentage of total frequency. Note that frequency expressed in this way is known as relative frequency.
Solution
Relative frequency = class frequency / total frequency (100). Since the total is 100, the percentage equals the frequency itself.
In Example 4, which class has the maximum concentration of data? Express it as percentage of total observations. Which class has the minimum concentration of data?
Solution
The class 50-60 has the highest frequency (23), so it has the maximum concentration: 23/100 x 100 = 23 per cent of the observations. The class 0-10 has the lowest frequency (1) and so the minimum concentration, 1 per cent.
Distinguish the following variables as continuous and discrete: Area, volume, temperature, number appearing on a dice, crop yield, population, rainfall, number of cars on road and age.
Solution
Variable
Type
Reason
Area
Continuous
Can take any value, including fractions.
Volume
Continuous
Can take any value in a range.
Temperature
Continuous
Can take any value in between.
Number appearing on a dice
Discrete
Only 1, 2, 3, 4, 5 or 6.
Crop yield
Continuous
Measured in kg or tonnes per hectare; can be fractional.
Find the range of the following: population of India in Example 1 and yield of wheat in Example 2. What should be the size of each class?
Solution
Population of India (Example 1). Range = 121.0 - 35.7 = 85.3 crore. With a class interval of 10 crore, the number of classes = 85.3/10 = 8.53, so about 9 classes are needed, for example 35-45, 45-55, ... 115-125 (the lowest value 35.7 falls in the first class and the highest value 121.0 in the last).
Yield of wheat (Example 2). Range = 7,998 - 2,787 = 5,211 kg/hectare. With a class interval of 1,000 kg/hectare, the number of classes = 5.211, so about 6 classes (for example 2,000-3,000 to 7,000-8,000).
The class size is chosen with the number of classes in mind. The number of classes is usually between six and fifteen, and number of classes = range / class interval, so the class size is a matter of judgement (the sizes above are sample choices).
If you compare Figure 3.2 with Figure 3.1, what do you observe? Do you find any difference between them? Can you explain the difference?
Solution
Figure 3.1 plots the class marks 5, 15, ..., 95 against the frequencies of equal classes of width 10. It shows one main hump with its peak at class mark 55 (frequency 23). Figure 3.2 is drawn from unequal classes: the classes 40-50, 50-60 and 60-70 are each split into two classes of width 5, so more class marks (42.5, 47.5, 52.5, 57.5, 62.5 and 67.5) are plotted. The curve is more uneven, with a rise to about 12 at 47.5, a dip to 7 at 52.5 and a higher peak of 16 at 57.5.
The difference arises because the narrower classes show the actual spread of the observations in the middle range, which the wide classes of Figure 3.1 hide. The new class marks are also closer to the observations in their classes, so Figure 3.2 is more representative of the data.
Suggested Activity: From your old mark-sheets find the marks that you obtained in mathematics in the previous class half yearly or annual examinations. Arrange them year-wise. Check whether the marks you have secured in the subject is a variable or not. Also see, if over the years, you have improved in mathematics.
Solution
Guidance: Prepare a table with the year or class in one column and the marks in mathematics in the other (a time series). Since the marks change from one examination to another, they are a variable (a discrete one if fractional marks are not given). Compare the marks of each year with the previous year: if they show a rising trend, you have improved over the years.
Done with the answers?Now revise the whole chapter: Class 11 Economics notes
For NCERT Statistics for Economics (Class 11) and Introductory Microeconomics (2026-27 editions) - all 13 chapters of the CBSE Class 11 syllabus
Typed concept notes with labelled diagrams, tables and formulas
Every NCERT exercise solved in full: statistics numericals (mean, median, mode, correlation, index numbers) and microeconomics numericals and graphs