Cambridge AS & A Level Mathematics 9709: 236 Common Mistakes That Lose Marks | Notes Bazar Skip to content
Smart Notes for Every Exam · instant PDF download after payment +91 92520 37565
Home › Cambridge › AS & A Level › Mathematics 9709 common mistakes
Free resource · Cambridge AS & A Level Mathematics 9709

AS & A Level Mathematics 9709: 236 common mistakes that lose marks

Most marks in Cambridge AS & A Level Mathematics are lost to the same habits every year: a missing unit, a vague word where the mark scheme wants a precise one, a step skipped in an explanation. Below are 236 mistakes from 32 chapters, each with the correct version. Read the chapter you are revising, then try its questions.

Notes Bazar is independent and not endorsed by or affiliated with Cambridge University Press & Assessment. Cambridge IGCSE, AS & A Level are trademarks of Cambridge University Press & Assessment.

  1. Quadratics
  2. Functions
  3. Coordinate Geometry
  4. Circular Measure
  5. Trigonometry
  6. Series
  7. Differentiation
  8. Integration
  9. Algebra
  10. Logarithmic and Exponential Functions
  11. Trigonometry
  12. Differentiation
  13. Integration
  14. Numerical Solution of Equations
  15. Vectors
  16. Differential Equations
  17. Complex Numbers
  18. Forces and Equilibrium
  19. Kinematics of Motion in a Straight Line
  20. Momentum
  21. Newton's Laws of Motion
  22. Energy, Work and Power
  23. Representation of Data
  24. Permutations and Combinations
  25. Probability
  26. Discrete Random Variables
  27. The Normal Distribution
  28. The Poisson Distribution
  29. Linear Combinations of Random Variables
  30. Continuous Random Variables
  31. Sampling and Estimation
  32. Hypothesis Tests

Chapter 1: Quadratics

  • Calculator-only solutions of quadratics, or quoting the formula without substituting values.
  • Completing the square with a≠1a \ne 1: forgetting to multiply the −(b2a)2-\left(\frac{b}{2a}\right)^2 term by aa: 2x2+12x+11≠2(x+3)2+22x^2 + 12x + 11 \ne 2(x + 3)^2 + 2.
  • Wrong discriminant condition: using >0> 0 for "does not meet", or >0> 0 for "real roots" (it is ≥0\ge 0).
  • Losing a solution: discarding the negative value of x3x^3 (its cube root is fine), or writing −83=±2\sqrt[3]{-8} = \pm 2.
  • Using xx as the substitution letter for x3x^3 or x2x^2, then forgetting to change back.
  • Algebra slips when clearing fractions, e.g. −12x-\frac{1}{2x} becoming −x2-\frac{x}{2}.
  • Inequality sets written as one impossible statement such as 2<x<−122 < x < -\frac{1}{2}.

Chapter 2: Functions

  • Range and domain confused: giving the domain of f (e.g. x>3x > 3) when asked for the range, or writing a range as "x≠1x \ne 1".
  • Range from the end points only, when the vertex lies inside the domain.
  • Wrong order of a composite: fg(x)\mathrm{fg}(x) worked out as g(f(x))\mathrm{g}(\mathrm{f}(x)); or dropping part of the rule (e.g. the "1+1 +" in f(x)=1+2x\mathrm{f}(x) = 1 + \frac{2}{x}) when substituting.
  • Algebra slips when clearing fractions, e.g. not multiplying every term by the denominator.
  • Transformations described vaguely: "moved left 6" without a vector or direction; a stretch without its direction or scale factor; or describing the reverse transformation.
  • The mirror line y=xy = x drawn from corner to corner of a grid with unequal scales, or a graph reflected in a horizontal line instead.

Chapter 3: Coordinate Geometry

  • Circle equation: "=r= r" or "=r= \sqrt{r}" instead of r2r^2; signs of the centre wrong; brackets not squared; xx and yy swapped.
  • Gradient of a radius inverted (x2−x1y2−y1\frac{x_2 - x_1}{y_2 - y_1}), or the tangent given the radius gradient instead of its negative reciprocal.
  • Not linking parts: a later part often needs the centre, radius or tangent found earlier.
  • Quadratics solved by calculator only when finding intersections: no method seen, marks lost.
  • Surd form not understood: giving 4.47 when 252\sqrt{5} (exact) is required.
  • Arithmetic slips with negatives in the distance formula: (x2−x1)2(x_2 - x_1)^2 with x1=−3x_1 = -3 is (x2+3)2(x_2 + 3)^2.

Chapter 4: Circular Measure

  • Calculator in degree mode, or using the angle in degrees in s=rθs = r\theta (e.g. 5×605 \times 60).
  • Finding an area when a perimeter is asked (e.g. area of segment instead of its perimeter), or leaving out one of the radii in a sector perimeter.
  • Assuming a triangle is right-angled when it is not; use the cosine rule or split an isosceles triangle in half.
  • Forgetting the 12\frac{1}{2} in 12r2θ\frac{1}{2}r^2\theta or in 12absin⁡C\frac{1}{2}ab\sin C.
  • Using the arc length instead of the radius, or the wrong length (e.g. OTOT instead of OAOA) as the radius of the sector.
  • Premature rounding of angles such as π12≈0.26\frac{\pi}{12} \approx 0.26, giving a final answer outside the allowed range.

Chapter 5: Trigonometry

  • Invalid identities. Writing sin⁡θ=1−cos⁡θ\sin\theta = 1 - \cos\theta (it is sin⁡2θ=1−cos⁡2θ\sin^2\theta = 1 - \cos^2\theta) or sin⁡2θ=2sin⁡θ\sin 2\theta = 2\sin\theta.
  • Cancelling a common factor. Dividing both sides by sin⁡θ\sin\theta or by (sin⁡θ+cos⁡θ−1)(\sin\theta + \cos\theta - 1) loses the solutions of that factor =0= 0; factorise instead.
  • Missing solutions. Giving only the calculator value, or only two answers when the multiple angle gives four.
  • Wrong interval for a multiple angle. Solving sin⁡2x=k\sin 2x = k in 0≤2x≤2π0 \le 2x \le 2\pi instead of 0≤2x≤4π0 \le 2x \le 4\pi.
  • Degree/radian mix-ups. Answers in degrees for a radian interval, or the calculator in the wrong mode.
  • Range of a trig function. Substituting the end-points of the domain instead of using sin⁡x=±1\sin x = \pm 1 (e.g. for 3−2sin⁡x3 - 2\sin x the range is 1≤y≤51 \le y \le 5).
  • Sketches with the wrong period or a non-periodic curve; cos⁡2x\cos 2x has period π\pi, sin⁡12x\sin\frac{1}{2}x has period 4π4\pi.
  • Principal values. cos⁡−1\cos^{-1} gives values in [0,π][0, \pi] and sin⁡−1\sin^{-1}, tan⁡−1\tan^{-1} in [−π2,π2]\left[-\frac{\pi}{2}, \frac{\pi}{2}\right]; sin⁡−1x≠1sin⁡x\sin^{-1}x \ne \frac{1}{\sin x}.
  • Rounding. Rounding the principal value early (e.g. 75.5° → 76°) and then adding 180°: keep full accuracy until the end.

Chapter 6: Series

  • Powers on the constant. Writing 54ax254a x^2 instead of 54a2x254a^2x^2 for a term of (1+3ax)n(1 + 3ax)^n: the whole term (3ax)(3ax) is squared.
  • Signs in the second and third terms. With (2−3x)n(2 - 3x)^n, odd powers of (−3x)(-3x) are negative.
  • Products of brackets. Adding the x2x^2 coefficients of both brackets, or choosing the larger, instead of multiplying the pairs of terms that make x2x^2.
  • Losing a root. a2=4a^2 = 4 gives a=±2a = \pm 2: the negative value is often lost.
  • Equation instead of inequality. Solving Sn=1000S_n = 1000 and rounding down; the question asks for the least nn with Sn>1000S_n > 1000.
  • Unjustified solutions. Writing the roots of a quadratic or cubic in rr with no method shown; a visible method of solution is required.
  • Sum to infinity with ∣r∣≥1|r| \ge 1. a1−r\frac{a}{1 - r} is meaningless unless −1<r<1-1 < r < 1.
  • nnth term confused with the sum. "How much in the 10th year" is u10u_{10}, "how much in 10 years altogether" is S10S_{10}.

Chapter 7: Differentiation

  • Forgetting the chain rule. ddx(3x−1)4=4(3x−1)3×3\frac{d}{dx}(3x - 1)^4 = 4(3x - 1)^3 \times 3; the "×3\times 3" is often missed, especially with square roots.
  • Power errors with negative and fractional indices. ddxx−2=−2x−3\frac{d}{dx}x^{-2} = -2x^{-3} (not −2x−1-2x^{-1}); ddxx−12=−12x−32\frac{d}{dx}x^{-\frac{1}{2}} = -\frac{1}{2}x^{-\frac{3}{2}}.
  • Rates of change without differentiating. Substituting the given value into the volume formula instead of into dVdh\frac{dV}{dh}.
  • Substituting too early. Putting x=2x = 2 into yy and then "differentiating" a number.
  • Using mm for the normal. The normal gradient is −1m-\frac{1}{m}.
  • Wrong conclusion about the nature. Arithmetic slips in d2ydx2\frac{d^2y}{dx^2} lead to "maximum" for a minimum; show the substitution.
  • Final form. A correct tangent not rearranged into the form the question asks for (e.g. ax+by+c=0ax + by + c = 0 with integers) loses the A mark.

Chapter 8: Integration

  • Differentiating instead of integrating (or mixing the two): powers must go up by one.
  • Forgetting to divide by aa in ∫(ax+b)n dx\int(ax + b)^n\,dx, or multiplying by aa as in differentiation.
  • Negative powers. ∫x−3 dx=x−2−2\int x^{-3}\,dx = \frac{x^{-2}}{-2}, not x−4−4\frac{x^{-4}}{-4}.
  • Missing or unused + c+\,c, or finding cc but not writing the final "y=…y = \dots" equation (or not simplifying, e.g. leaving −42-\frac{4}{2}).
  • Limits not shown. Writing only the final number from a calculator; examiners need to see the substitution.
  • Volumes: integrating yy instead of y2y^2; using (y1−y2)2(y_1 - y_2)^2 for a washer; forgetting to subtract the cylinder or cone that is not part of the solid.
  • Areas below the axis taken as negative, or cancelling with areas above the axis.
  • Area between a curve and a line: using the wrong limits, or subtracting the curve from the line the wrong way round (giving a negative area).

Chapter 9: Algebra

  • Squaring when only one side is a modulus. In the 2023 reports, squaring ∣f(x)∣<g(x)|f(x)| < g(x) produced an extra critical value (such as x=−5x = -5) that was not a real crossing point.
  • Poor modulus sketches: curved arms, or the vertex drawn on the yy-axis instead of at x=−bax = -\frac{b}{a}.
  • Using an invalid root. Putting a negative value from an earlier part equal to a modulus expression, which can never be negative.
  • Sign slips in long division, e.g. subtracting +6x+6x wrongly and getting the remainder −2x−15-2x - 15; and stopping at (x−3)(2x2+9x+10)(x - 3)(2x^2 + 9x + 10) when the quotient also factorises.
  • Powers of xx instead of 4x4x. In (1+4x)−12(1 + 4x)^{-\frac12} the x2x^2 term contains (4x)2=16x2(4x)^2 = 16x^2, not 4x24x^2.
  • Too few terms or unnecessary work. Finding the x3x^3 term when the x4x^4 term was needed; splitting into partial fractions when a direct expansion was quicker; choosing a two-term form that makes later integration harder.
  • Wrong form for a repeated factor: Ax+1+B(x−2)2\frac{A}{x + 1} + \frac{B}{(x - 2)^2} is missing the Cx−2\frac{C}{x - 2} term.

Chapter 10: Logarithmic and Exponential Functions

  • Brackets omitted when taking logs (2023 reports), e.g. ln⁡3x+1\ln 3^{x + 1} written as x+1ln⁡3x + 1\ln 3, leading to wrong simplification.
  • Invented log laws: ln⁡(2x+1)+ln⁡(2x−1)=ln⁡2x+12x−1\ln(2x + 1) + \ln(2x - 1) = \ln\frac{2x + 1}{2x - 1}; ln⁡(a+b)=ln⁡a+ln⁡b\ln(a + b) = \ln a + \ln b; and "3ln⁡2x−4ln⁡(−2x)3\ln 2x - 4\ln(-2x)" style rewrites.
  • Not rejecting impossible values: keeping the negative root when x2=2x^2 = 2 came from logs of xx; trying to process ex=−3e^x = -3.
  • Wrong accuracy or form: 3 s.f. given when 3 d.p. was asked, a decimal when an exact answer was asked, or eln⁡(…)e^{\ln(\ldots)} left unsimplified.
  • Linear form: finding the gradient but not linking it to the right constant (e.g. y=Ae(A−B)xy = Ae^{(A - B)x} has gradient A−BA - B and intercept ln⁡A\ln A; solve for AA first).
  • Poor sketches: y=ln⁡xy = \ln x crossing the xx-axis away from 1, drawn for x<0x < 0, or levelling off.
  • Inequality sign not reversed after dividing by a negative logarithm such as ln⁡0.8\ln 0.8.

Chapter 11: Trigonometry

  • Losing the bracket. 5tan⁡2θ5\tan^2\theta written as 5sec⁡2θ−15\sec^2\theta - 1 instead of 5(sec⁡2θ−1)5(\sec^2\theta - 1) (a common error in the 2023 Paper 2 reports).
  • Wrong half-angle formula. Writing cos⁡12x=12cos⁡2x−1\cos\frac12 x = \frac12\cos^2 x - 1; the correct link is cos⁡x=2cos⁡212x−1\cos x = 2\cos^2\frac12 x - 1.
  • Missing solutions from negative angles. In Rsin⁡(θ−α)=cR\sin(\theta - \alpha) = c, the angle θ−α\theta - \alpha can be negative; examiners saw answers such as 29.8° omitted and out-of-range ones such as 389.8° included.
  • Wrong second solution. Using 180°−x180° - x for tan (it should be 180°+x180° + x), or 2θ=360°−2×39.2°2\theta = 360° - 2 \times 39.2° instead of finding all values of 2θ2\theta first.
  • Sign and surd slips in expansions. cos⁡(x−60°)=cos⁡xcos⁡60°+sin⁡xsin⁡60°\cos(x - 60°) = \cos x\cos 60° + \sin x\sin 60° (plus sign); sin⁡60°=32\sin 60° = \frac{\sqrt3}{2}, not 3\sqrt3.
  • Mixing degrees and radians, e.g. finding α\alpha in degrees and then solving in radians.
  • Not using the RR form for greatest/least values. The extreme occurs when sin⁡(θ±α)=±1\sin(\theta \pm \alpha) = \pm 1.

Chapter 12: Differentiation

  • Missing the inner derivative: ddxcos⁡3x=−sin⁡3x\frac{d}{dx}\cos 3x = -\sin 3x (should be −3sin⁡3x-3\sin 3x), or the 2 omitted from ddxsin⁡2x\frac{d}{dx}\sin 2x (2023 reports).
  • Not recognising a product, e.g. differentiating e−xsin⁡2xe^{-x}\sin 2x as −e−x×2cos⁡2x-e^{-x} \times 2\cos 2x; or ddt(te−t)=−te−t\frac{d}{dt}(te^{-t}) = -te^{-t}, which forgets one term.
  • Wrong derivative of tan⁡−1\tan^{-1}: answers with sec⁡(2t)\sec(2t) or sec⁡−1(2t)\sec^{-1}(2t); confusing tan⁡−1x\tan^{-1} x with 1tan⁡x\frac{1}{\tan x}. The correct result is 21+4t2\frac{2}{1 + 4t^2}.
  • Treating a constant as a variable in implicit work: differentiating ay2ay^2 as a product when aa is a constant.
  • Algebra after the calculus: inverting dxdt=1+21+4t2\frac{dx}{dt} = 1 + \frac{2}{1 + 4t^2} as 1+1+4t221 + \frac{1 + 4t^2}{2}; sign errors when collecting dydx\frac{dy}{dx} terms; brackets dropped in the quotient rule.
  • Notation: mixing tt, xx and θ\theta in a parametric answer, or omitting the variable altogether.
  • Normal or tangent: using the tangent gradient for the normal, or forgetting to find xx and yy from tt first.

Chapter 13: Integration

  • Calculator integration. "Using a calculator for integration is not sufficient": the algebraic integral and the substitution of limits must be seen (2023 reports, all papers).
  • Logs for the repeated factor. ∫1(x+2)2dx\int\frac{1}{(x + 2)^2}dx was often given as a third log term; it is −1x+2-\frac{1}{x + 2}. Wrong partial-fraction forms such as Dx+E(2−x)2\frac{Dx + E}{(2 - x)^2} made the integral much harder.
  • Wrong tan⁡−1\tan^{-1} coefficient. ∫14+9y2dy\int\frac{1}{4 + 9y^2}dy: 12\frac12 was common in place of 16\frac16 (take out the 9 first). Also ln⁡(4+9y2)\ln(4 + 9y^2) when there is no yy on top.
  • Substitution slips. Missing dxdx or dudu, a minus sign that disappears without the limits being reversed, limits used in the wrong order, or old xx-limits used with a uu integral.
  • Losing a constant. Taking the 2 outside the integral and forgetting it at the end; integrating e2ue^{2u} as 2e2u2e^{2u} instead of 12e2u\frac12e^{2u}.
  • Wrong identities. ∫tan⁡2θ dθ=13tan⁡3θ\int\tan^2\theta\,d\theta = \frac13\tan^3\theta is wrong: use sec⁡2θ−1\sec^2\theta - 1. Also cos⁡22x=12(1+cos⁡2x)\cos^2 2x = \frac12(1 + \cos 2x) (the angle must double to 4x4x).
  • Sign errors in parts, especially when v=−12cos⁡2xv = -\frac12\cos 2x or v=−e−xv = -e^{-x}; put the negative vv in brackets.
  • Degrees. All calculus with trigonometric functions uses radians.

Chapter 14: Numerical Solution of Equations

  • No conclusion after the sign-change calculation, or vague statements "not supported by numerical evidence" (2023 reports).
  • Numbers instead of algebra when asked to show how the formula relates to the equation; working backwards from the equation was less successful than starting from x=F(x)x = F(x).
  • Degrees instead of radians in a trigonometric iteration: no marks at all.
  • Wrong rounding of the final answer, e.g. 0.80 instead of 0.79, or iterates not given to the required 4 d.p.
  • Too few iterations for a slowly converging sequence, so the stated value is not confirmed; or many unnecessary iterations after convergence.
  • Confusing notation such as tan⁡−1(12x)\tan^{-1}(\tfrac12x) for cot⁡(12x)\cot(\tfrac12x), or 1tan⁡(x)\frac{1}{\tan}(x).
  • Sketches unrecognisable: unlabelled curves, no scale, ln⁡x\ln x crossing the axis away from x=1x = 1 or with a horizontal asymptote.
  • Trusting a sign change across an asymptote, or concluding "no root" when there is no sign change.

Chapter 15: Vectors

  • Vertices out of order. In parallelogram ABCDABCD, AB→=DC→\overrightarrow{AB} = \overrightarrow{DC}, not CD→\overrightarrow{CD}; many candidates "incorrectly assumed that AB→=CD→\overrightarrow{AB} = \overrightarrow{CD}" (2023).
  • Wrong form of the line: r=OA→+λOB→\mathbf{r} = \overrightarrow{OA} + \lambda\overrightarrow{OB}, or finding AB→\overrightarrow{AB} and stopping, which left no simultaneous equations.
  • Not checking the third equation after solving two, so skew lines were declared to intersect.
  • Using position vectors instead of direction vectors for the angle between lines; or using BA→\overrightarrow{BA} and AC→\overrightarrow{AC} for angle BACBAC.
  • Direction errors in PQ→\overrightarrow{PQ} (p−q\mathbf{p} - \mathbf{q} instead of q−p\mathbf{q} - \mathbf{p}), not squaring a component when finding a magnitude, and arithmetic slips when copying vectors from line to line.
  • Answering a different question: finding ∣OP→∣|\overrightarrow{OP}| when ∣AP→∣|\overrightarrow{AP}| was asked, or QR→\overrightarrow{QR} instead of OR→\overrightarrow{OR}.
  • Obtuse angle left as the answer when the angle between two lines is required.

Chapter 16: Differential Equations

  • Incorrect separation. Writing ∫(e2x+1) dx\int (e^{2x} + 1)\,dx when the equation contained e2x+1e^{2x + 1}, or leaving an xx on the yy side. Simplify the expression first.
  • Wrong coefficient in tan⁡−1\tan^{-1}. ∫14+9y2 dy=16tan⁡−13y2\int \frac{1}{4 + 9y^2}\,dy = \frac{1}{6}\tan^{-1}\frac{3y}{2}, not 12tan⁡−13y2\frac{1}{2}\tan^{-1}\frac{3y}{2}. Rewrite as 19∫149+y2 dy\frac{1}{9}\int \frac{1}{\frac{4}{9} + y^2}\,dy if unsure.
  • Using degrees to find the constant from a tan⁡−1\tan^{-1} or sin⁡−1\sin^{-1} value.
  • Constant in the wrong place. From ln⁡y=x2+c\ln y = x^2 + c writing y=ex2+cy = e^{x^2} + c; or adding the constant only after rearranging.
  • Partial fractions. Splitting 15x+x2\frac{1}{5x + x^2} into 15x+1x2\frac{1}{5x} + \frac{1}{x^2}; use the factorised denominator x(5+x)x(5 + x) with correct partial fractions.
  • Sign slips integrating 110−x\frac{1}{10 - x}: the result is −ln⁡(10−x)-\ln(10 - x).
  • Guessing the long-term behaviour ("yy tends to zero") without looking at the solution.

Chapter 17: Complex Numbers

  • Wrong quadrant. arg⁡(−2−2i)\arg(-2 - 2i) is −3π4-\frac{3\pi}{4}, not π4\frac{\pi}{4}: tan⁡−1yx\tan^{-1}\frac{y}{x} cannot see the signs. Look at the signs of the real and imaginary parts first.
  • Ignoring the conjugate sign z∗z^*, or equating an expression to x+iyx + iy instead of to the given right-hand side (or 0).
  • Unequal scales on an Argand diagram, so the "circle" and the half-line do not match the scale.
  • Half-line drawn as a full line for arg⁡(z−a)=α\arg(z - a) = \alpha, or drawn from the wrong point.
  • Shading the wrong region, or not making clear which side of the perpendicular bisector is wanted.
  • Finding only part of an angle (e.g. only the angle at the centre) or giving a length when an angle is asked for.
  • Using a calculator to write down the roots of a polynomial without showing they satisfy the equation.
  • Sign slips such as i2=1i^2 = 1, or (a+ib)(a−ib)=a2−b2(a + ib)(a - ib) = a^2 - b^2.

Chapter 18: Forces and Equilibrium

  • No force diagram: examiners repeat that "a well annotated force diagram" would have stopped candidates leaving out a force or a component.
  • Normal reaction taken as mgmg or mgcos⁡θmg\cos\theta when another force (a pull at an angle, a horizontal push) also has a component perpendicular to the surface.
  • Mixing up sin and cos when resolving the weight on a slope, and sign errors in the parallel equation.
  • One string, two tensions: a single string over a smooth peg or ring has the same tension in both parts; some candidates used two different tensions or included only one of the two tensions in a resolving equation.
  • F=μRF = \mu R used when the particle is not about to slip; or friction drawn in the wrong direction in one of the two limiting cases.
  • Premature rounding of an angle or of intermediate values, so the final answer is not correct to 3 s.f.
  • Scale drawing instead of calculation: it gains no marks.

Chapter 19: Kinematics of Motion in a Straight Line

  • Using suvat when the acceleration is not constant: when vv is given as a function of tt you must differentiate or integrate. Examiners report this as a frequent error.
  • Solving a=0a = 0 to find when a particle is at rest; at rest means v=0v = 0.
  • Giving a negative speed, e.g. writing −7.2 for a speed when 7.2 is wanted (or a velocity when the speed is wanted).
  • Area slips: forgetting the 12\tfrac12 in a triangle, or assuming two line segments form an isosceles triangle when the graph does not say so.
  • Distance = displacement when the particle changes direction: find where v=0v = 0 and add the separate areas.
  • Time measured from the wrong origin (e.g. 12×T×3\tfrac12 \times T \times 3 instead of 12×(T−10)×3\tfrac12 \times (T - 10) \times 3) in multi-stage graphs.
  • Differentiating twice and quoting d2vdt2\dfrac{\mathrm{d}^2v}{\mathrm{d}t^2} as the maximum acceleration, or not stating which value is the maximum.

Chapter 20: Momentum

  • Missing a negative sign for a particle moving in the opposite direction: examiners report that many candidates did not take account of particles moving towards each other, then changed a negative answer to positive without justification.
  • Including a third particle in the equation for a collision between two of them (e.g. including P in the collision between Q and R).
  • Assuming a particle keeps moving after it has been stated (or shown) to come to rest.
  • Using conservation of kinetic energy instead of conservation of momentum.
  • Giving a velocity when a speed is asked (e.g. −1.33 instead of 1.33), or the reverse; and answers "not in terms of mm" when that was asked.
  • Dividing the wrong way round when solving, e.g. 1.25 instead of 0.8.
  • Kinetic energy errors: finding the difference of the two particles' initial KEs instead of total before − total after, or evaluating (−6)2(-6)^2 as −36-36.

Chapter 21: Newton's Laws of Motion

  • Wrong mass in a system equation (examiners saw this often in connected-particle questions); or including the tension and the trailer resistance as if they were both external to the system.
  • Missing a force: leaving out friction or the tension in one particle's equation; "a well annotated force diagram would have helped" is the most repeated examiner comment.
  • Normal reaction on a slope taken as mgmg instead of mgcos⁡θmg\cos\theta (plus any perpendicular component of an applied force); mixing up sin⁡\sin and cos⁡\cos.
  • Two tensions for one string over a smooth pulley, or only one tension in a horizontal equation when the string pulls the particle twice.
  • Same acceleration on rough and smooth sections: when a particle leaves a rough surface the friction term disappears, so the acceleration changes.
  • Lift questions: using a deceleration with the wrong sign, or including the mass of the lift when only the passenger is being considered.
  • Premature rounding of an angle such as α=53.1°\alpha = 53.1° when tan⁡α=43\tan\alpha = \frac43 is given; this loses the accuracy mark.

Chapter 22: Energy, Work and Power

  • Forces instead of work in an energy equation: writing the resistance 24 N instead of 24×24 \times distance. Examiners report this every year; check that every term is in joules.
  • Change in KE written as 12m(v−u)2\tfrac12 m(v - u)^2 instead of 12m(v2−u2)\tfrac12 m(v^2 - u^2); or (after a collision) the difference of the separate KEs instead of total KE before − total KE after.
  • Constant-acceleration equations with constant power: the driving force P/vP/v changes, so the acceleration is not constant.
  • Omitting the distance in the friction term (μR\mu R instead of μR×d\mu R \times d), or using R=mgR = mg on a slope instead of mgcos⁡αmg\cos\alpha.
  • Sign errors: putting the work done against resistance on the wrong side, or leaving out work done by a person pushing (the "child pushes off" term).
  • Wrong height: using the distance along the slope as hh, or the wrong difference in height between two points.
  • Using 16 instead of 16 000 for 16 kW; premature rounding of sin⁡θ\sin\theta or of the PE term.

Chapter 23: Representation of Data

  • Coded totals: taking Σ(x−a)2÷n\sqrt{\Sigma(x - a)^2 \div n} without subtracting the square of the coded mean; or writing Σa=a\Sigma a = a instead of nana (e.g. Σ50=50\Sigma 50 = 50 for 40 values).
  • Bar chart instead of histogram: plotting frequency, leaving gaps, or using the stated class limits (10–14) instead of the boundaries (9.5–14.5).
  • Median class taken as the middle class of the table instead of the class containing the 12n\tfrac12 nth value.
  • Back-to-back diagrams: reading the left-hand leaves the wrong way, e.g. giving the 15th value from the wrong end.
  • Box plots drawn freehand, on a non-linear scale, or combined so the two sets cannot be told apart.
  • Combining data sets by averaging the two means or the two standard deviations.
  • Grouped data mean using class limits or class widths instead of mid-interval values.

Chapter 24: Permutations and Combinations

  • Adding instead of multiplying: 6C3+8C3^6C_3 + {^8C_3} for "3 men and 3 women" (examiners saw this often); or summing combinations inside one case.
  • Treating repeated letters as different, e.g. giving 8!8! for a word with 3 Os and 2 Cs; or forgetting to divide by 2!2! for letters still repeated after some are fixed.
  • Missing a case, most often the "0" case (no brothers), or selecting the rest from the wrong number of people.
  • "Not together" for three people done as total − (all three together), which still includes arrangements with two of them together. Use the gaps method.
  • Blocks: not arranging the blocks themselves (e.g. giving 288 instead of 288×3!288 \times 3!), or not arranging the people within each block.
  • Conditional probability with arrangements: dividing by the wrong total; the denominator is the number of arrangements satisfying the given condition.
  • Using nCr^nC_r where order matters (prizes, positions, numbers) or nPr^nP_r for a committee.

Chapter 25: Probability

  • Treating totals as equally likely, e.g. P(total 7) =111= \dfrac{1}{11}: use the 36-cell grid.
  • Missing the arrangements: three different colours can come in 3!3! orders; multiplying one path only gives 16\dfrac{1}{6} of the answer.
  • Assuming independence when finding P(A∩B′)\mathrm{P}(A \cap B') in a conditional probability, e.g. multiplying P(B)\mathrm{P}(B) by P(A′)\mathrm{P}(A') without reason.
  • Wrong denominator for P(A∣B)\mathrm{P}(A \mid B): dividing by the total instead of by P(B)\mathrm{P}(B), or using only one branch of the tree for P(B)\mathrm{P}(B).
  • Using unconditional probabilities on the second stage of a tree: after "it rained yesterday" or "without replacement", the probabilities change.
  • Confusing exclusive with independent: "independent because they cannot both happen" is wrong.
  • Poor notation: write P(A∩B)\mathrm{P}(A \cap B), not P(AB) or P(A + B).
  • Rounding an exact answer such as 740\dfrac{7}{40} to 0.175 is fine, but 0.18 loses the accuracy mark.

Chapter 26: Discrete Random Variables

  • Probabilities that do not add to 1 or are negative; or extra values of XX that cannot occur.
  • Forgetting to subtract [E(X)]2[\mathrm{E}(X)]^2 in Var(X)\mathrm{Var}(X), or subtracting E(X)\mathrm{E}(X) instead of its square.
  • Missing binomial coefficients: (0.15)2(0.85)10(0.15)^2(0.85)^{10} without (122)\binom{12}{2}.
  • Misreading "at least", "more than": e.g. omitting P(X=2)\mathrm{P}(X = 2) when finding P(X>2)\mathrm{P}(X > 2), or not subtracting from 1.
  • Using a binomial model for "until the first success", or finding only P(X=5)\mathrm{P}(X = 5) when the question asks for "within 5 trials" (P(X≤5)=1−q5\mathrm{P}(X \le 5) = 1 - q^5).
  • Writing E(X)=np\mathrm{E}(X) = np for a geometric variable, or working out ∑x P(x)\sum x\,\mathrm{P}(x) when the question says "state": E(X)=1p\mathrm{E}(X) = \frac1p.
  • Including an extra trial: "more than 5 trials needed" is q5q^5, not q6q^6.
  • Premature rounding of probabilities used again later (e.g. a binomial probability then used as pp in a second binomial).

Chapter 27: The Normal Distribution

  • Variance for standard deviation. In N(72,25)\mathrm{N}(72, 25), divide by 55, not 25.
  • Using a probability as a zz-value, e.g. writing 30−μσ=0.0668\dfrac{30 - \mu}{\sigma} = 0.0668 instead of −1.5-1.5.
  • Wrong sign of zz when the value is below the mean; making σ\sigma positive at the end does not repair the earlier error.
  • Premature rounding: 1.28 instead of 1.282, or σ\sigma rounded before it is used again.
  • Wrong area: giving Φ(z)\Phi(z) when 1−Φ(z)1 - \Phi(z) is needed; assuming a two-sided area is symmetric without checking.
  • Continuity correction missing, in the wrong direction ("between 36 and 48 inclusive" is 35.5 to 48.5), or used for continuous data.
  • Stopping early: not multiplying by the number of items, or not giving that number as a whole number.
  • Justifying the approximation with "nn is large" only: state np=…>5np = \ldots > 5 and nq=…>5nq = \ldots > 5 with the actual values.

Chapter 28: The Poisson Distribution

  • Not scaling λ\lambda to the interval, e.g. using 4.5 for a 20-minute period.
  • Omitting a term, e.g. leaving out P(X=2)\mathrm{P}(X = 2) in P(X≤2)\mathrm{P}(X \le 2), or forgetting the "1−1 -" in "at least".
  • Using the binomial or normal when a Poisson approximation was intended (large nn, small pp).
  • Conditions not in context: "events independent, singly, at random" copied from a textbook, or simply repeating "constant rate" given in the question.
  • Continuity correction missing or in the wrong direction; a probability area greater than 0.5 when it should be less.
  • Using λ\lambda as the standard deviation in the normal approximation: σ=λ\sigma = \sqrt{\lambda}.
  • Premature rounding of λ\lambda (e.g. 3.4163 rounded to 3.4), changing the third significant figure.
  • Two significant figures (0.044) instead of three (0.0441).

Chapter 29: Linear Combinations of Random Variables

  • Subtracting variances: Var(X−Y)=3−2\mathrm{Var}(X - Y) = 3 - 2 instead of 3+23 + 2.
  • Not squaring the coefficient: Var(1.5Y)\mathrm{Var}(1.5Y) taken as 1.5 Var(Y)1.5\,\mathrm{Var}(Y); or squaring the variance instead, e.g. using 20220^2 when the variance is already 20.
  • Confusing nXnX with X1+⋯+XnX_1 + \dots + X_n, e.g. working "per day" when the question is about a total over 7 days.
  • Only one tail for "the two values differ by more than 2": P(X−Y>2)\mathrm{P}(X - Y > 2) found, P(Y−X>2)\mathrm{P}(Y - X > 2) forgotten, or the two multiplied.
  • Wrong area: answer below 0.5 when the sketch shows more than half the curve is shaded.
  • Wrong Poisson parameter: using one rate (e.g. 2.5) instead of the combined rate (5.1 + 2.5), or omitting a term in 1−P(…)1 - \mathrm{P}(\ldots).
  • Assumptions not stated in context: "independent" alone; say e.g. "the masses of the jars are independent of each other".
  • Premature rounding: answers to 2 s.f. (0.044) or 3 d.p. instead of 3 s.f.

Chapter 30: Continuous Random Variables

  • Only one property checked when showing a function is a pdf: the area is 1 is shown but f(x)≥0\mathrm{f}(x) \ge 0 is not stated.
  • Integrating f(x)\mathrm{f}(x) instead of x f(x)x\,\mathrm{f}(x) for the mean, or omitting the xx altogether.
  • Confusing the mean and the median: using ∫x f(x) dx=0.5\int x\,\mathrm{f}(x)\,\mathrm{d}x = 0.5 or f(m)=0.5\mathrm{f}(m) = 0.5 for the median.
  • Variance without subtracting [E(X)]2[\mathrm{E}(X)]^2, or subtracting E(X)\mathrm{E}(X) instead of its square.
  • Integration slips: wrong power when integrating x−4x^{-4}, or losing a factor when multiplying out before integrating.
  • Setting kk equal to the height of a triangle instead of finding kk from it (height =4k= 4k, not kk).
  • Integrating where geometry is easier: a semicircle has area 12πr2\frac{1}{2}\pi r^2, a triangle 12bh\frac{1}{2}bh.
  • Vague explanations, e.g. "the graph is skewed" to justify where the median lies; use the areas either side of the value instead.

Chapter 31: Sampling and Estimation

  • Using σ\sigma instead of σn\dfrac{\sigma}{\sqrt{n}} when standardising a sample mean.
  • Confusing the two variance formulae: (∑x)2n\dfrac{(\sum x)^2}{n} against (∑xn)2\left(\dfrac{\sum x}{n}\right)^2; or dividing by nn (the biased estimate).
  • Omitting the factor 2 when the width of the interval is given, or using the wrong zz (1.96 for a 90% interval).
  • Centring the interval on the count (46) instead of the proportion (46200\frac{46}{200}), or giving two separate values instead of an interval.
  • Vague comments on sampling: "only January to March was used" without saying these months are not typical of the year; comments about sample size instead of bias.
  • Not knowing when the CLT is unnecessary: if the population is normal, Xˉ\bar{X} is exactly normal.
  • Interpreting a 95% interval as "95% of the data lie in it" or "the mean is in it with certainty".
  • Several intervals: squaring the wrong probability, or using normal tables, instead of 0.1×0.10.1 \times 0.1 etc.

Chapter 32: Hypothesis Tests

  • Hypotheses missing, written with xx or pp for a Poisson mean, or as "H0=1.9\mathrm{H_0} = 1.9".
  • Using a single probability P(X=2)\mathrm{P}(X = 2) instead of the tail P(X≤2)\mathrm{P}(X \le 2), or including an extra term (e.g. P(X=6)\mathrm{P}(X = 6) in P(X≥6)\mathrm{P}(X \ge 6) found as 1−P(X≤6)1 - \mathrm{P}(X \le 6)).
  • Wrong parameter: using the rate per week (1.9) when the observation is over 4 weeks (7.6).
  • Two-tailed tests compared with 0.01 instead of 0.005 (or 0.05 instead of 0.025).
  • Definite conclusions ("the mean has decreased") or conclusions not in context.
  • Normal approximations without a continuity correction, or with the wrong area (greater than 0.5).
  • Type I probability given as 0.05 for a binomial or Poisson test; it is the actual probability of the critical region.
  • Type II error found without a new parameter value, or explained without context.
Want the full chapter, not just the mistakes? Our AS & A Level Mathematics 9709 notes cover every syllabus statement with worked examples, 20 MCQs per chapter and original exam-style questions with full mark schemes.

Prices shown in Indian rupees. Show prices in: ₹ INR · US$ USD