NCERT solutions for Class 11 Geography Fundamentals of Physical Geography Chapter 5: Geomorphic Processes (2026-27). Answers to all exercises: multiple choice, 30-word and 150-word questions, in-text questions and project work. All 27 questions are answered, with the key answer highlighted.
Which one of the following processes is a gradational process?
Deposition
Diastrophism
Volcanism
Erosion
Solution
(d) Erosion. Gradation is the wearing down of relief variations of the earth's surface through erosion, and erosion is a degradational process along with weathering and mass wasting. Diastrophism and volcanism are endogenic (land building) processes, and deposition fills up basins (aggradation).
Which one of the following materials is affected by hydration process?
Granite
Clay
Quartz
Salts
Solution
(d) Salts. Hydration is a chemical weathering process (with solution, carbonation, oxidation and reduction) in which water is chemically added to a mineral. Salts such as calcium sulphate (anhydrite) take up water, become gypsum and expand in volume, whereas granite and quartz are resistant. (The chapter only names hydration; this explanation is an outside fact.)
Debris avalanche can be included in the category of:
Landslides
Slow flow mass movements
Rapid flow mass movements
Subsidence
Solution
(c) Rapid flow mass movements. A debris avalanche is a rapid flow of a mass of debris down a slope under gravity, classed with other rapid flows such as mudflow and earthflow. It is not a slow flow, and it is not one of the landslide types the chapter lists (slump, debris slide, debris fall, rockslide, rock fall). (The chapter does not classify debris avalanche; this is an outside fact.)
It is weathering that is responsible for bio-diversity on the earth. How?
Solution
Weathering breaks rocks into fragments and prepares the way for the formation of regolith and soils. Forests (vegetation) depend upon the depth of weathering mantles, and biomes and bio-diversity are basically a result of forests. Thus weathering supports bio-diversity through soils and vegetation.
What are mass movements that are real rapid and perceptible? List.
Solution
Landslides are relatively rapid and perceptible movements of relatively dry material. They include slump, debris slide, debris fall, rockslide and rock fall. Over steep slopes, rock sliding is very fast and destructive, and debris avalanches are also frequent in the Himalayas.
What are the various mobile and mighty exogenic geomorphic agents and what is the prime job they perform?
Solution
The mobile and mighty exogenic agents are running water, groundwater, glaciers, wind, waves and currents. Their prime job is to remove (erode) earth materials, transport them over slopes and deposit them at lower levels, thereby wearing down relief and filling depressions.
Is weathering essential as a pre-requisite in the formation of soils? Why?
Solution
Yes. Soil formation (pedogenesis) depends first on weathering. The weathering mantle, the depth of weathered material, is the basic input from which soil forms, as it supplies the parent material on which organisms, humus and other factors then act. The parent material may also be transported deposits.
"Our earth is a playfield for two opposing groups of geomorphic processes." Discuss.
Solution
The earth's surface is continuously subjected to two groups of forces. Endogenic forces act from within the earth, while exogenic forces originate in the atmosphere and are induced basically by the sun's energy.
Endogenic processes (diastrophism and volcanism) derive energy from radioactivity, rotational and tidal friction and primordial heat. They are mainly land building: they move, elevate or build up parts of the crust, and since their action is not uniform, the original crustal surface is uneven.
Exogenic processes (weathering, mass wasting, erosion and deposition) are mainly land wearing. They wear down relief (degradation) and fill basins (aggradation), a phenomenon called gradation.
Endogenic forces continuously elevate parts of the surface, so exogenic processes fail to even out relief variations. Variations therefore remain as long as the opposing actions of the two groups continue. The earth is thus their playfield.
Exogenic geomorphic processes derive their ultimate energy from the sun's heat. Explain.
Solution
Exogenic processes derive their energy from the atmosphere, which is determined by the ultimate energy from the sun, and also from the gradients created by tectonic factors.
Variations in thermal gradients, created by latitude, season and the spread of land and water, produce different climatic regions, so exogenic processes vary from region to region.
Temperature and precipitation are the two important climatic elements that control the processes.
Vegetation, which depends on precipitation and temperature, also influences them indirectly.
Local differences in insolation received by north and south facing slopes compared with east and west facing slopes affect them further.
Wind, running water and glaciers, the agents of erosion and transportation, are controlled by climatic conditions.
Thus the sun's heat, acting through the atmosphere and climate, is the ultimate source of energy for exogenic processes, while gravity acts on materials on slopes.
Are physical and chemical weathering processes independent of each other? If not, why? Explain with examples.
Solution
No. The chapter says that very rarely does any one of the three groups of weathering processes operate completely by itself; quite often only a dominance of one process can be seen. They help one another:
Physical weathering breaks rocks into pieces. This exposes fresh surfaces and lets moisture and air penetrate, so chemical reactions speed up.
Burrowing and wedging by earthworms, termites and rodents, and the pressure of plant roots, expose new surfaces to chemical attack.
Chemical weathering such as solution, carbonation, hydration, oxidation and reduction loosens the bonds between grains, dissolving soluble minerals or cementing materials. This weakens rocks, so they fracture more easily.
Water, air (oxygen and carbon dioxide) and heat must be present to speed up chemical reactions. Wetting and drying cycles also act as physical forces.
Hence the processes act together and reinforce each other.
How do you distinguish between the process of soil formation and soil-forming factors? What is the role of climate and biological activity as two important control factors in the formation of soils?
Solution
Process and factors. Soil formation (pedogenesis) is the process: weathered material or transported deposits are colonised by bacteria, mosses and lichens, humus accumulates, plants take root, and a mature soil forms. Soil-forming factors are the controls that decide this: parent material, topography, climate, biological activity and time.
Climate is an active factor. Moisture (precipitation, evaporation, humidity) and temperature make chemical and biological activity possible. Excess water causes eluviation and illuviation, and in equatorial rainy areas desilication. In dry climates evaporation leaves salts that form hardpans. Higher temperature increases chemical activity, so tropical soils show deeper profiles.
Biological activity: vegetation and organisms add organic matter, retain moisture and give nitrogen. Dead plants give humus, whose organic acids decompose minerals. Bacterial intensity differs: humus accumulates in cold climates, while it is rapidly oxidised in humid tropics. Rhizobium fixes nitrogen, and earthworms and termites rework the soil.
The earth's crust is dynamic and has moved vertically and horizontally. The differences in the internal (endogenic) forces that built up the crust have caused variations in its outer surface. The surface is also continuously acted upon by exogenic forces, induced by the sun's energy, which wear down relief and fill basins. Endogenic forces keep elevating parts of the surface, so exogenic processes cannot even out the relief.
Do you think it is essential to distinguish geomorphic agents and geomorphic processes?
Solution
Yes. A process is a force applied on earth materials affecting them, such as weathering or erosion. An agent is a mobile medium like running water, moving ice, wind, waves and currents which removes, transports and deposits earth materials. The chapter says that, unless stated separately, the two are one and the same for exogenic processes, but the distinction helps in understanding that forces act through the agents.
Orogeny is a mountain building process in which the crust is severely folded and deformed, affecting long and narrow belts. Epeirogeny is a continental building process involving the uplift or warping of large parts of the crust, with simple deformation. Both can cause faulting and fracturing.
What do the words volcanism and volcanoes indicate?
Solution
Volcanism includes the movement of molten rock (magma) onto or toward the earth's surface and the formation of many intrusive and extrusive volcanic forms. A volcano is a place where gases, ashes or molten rock (lava) escape to the ground; it is called active if such materials are being released or have been released in the recent past.
Why do you think that the slopes or gradients are created by tectonic factors?
Solution
Tectonic (endogenic) forces such as diastrophism and volcanism move, elevate and build up parts of the crust unevenly. This makes some parts higher and others lower, so the surface is uneven, and gravity acts on materials along the resulting slopes.
What is the sole driving force behind all the exogenic processes?
Solution
The sun. Exogenic processes derive their energy from the atmosphere, determined by the ultimate energy from the sun, with gravity acting on the materials on slopes. The chapter also adds gradients created by tectonic factors.
Activity: Mark the latitude values of different climatic regimes in Figure 6.2 and compare the details.
Solution
Guidance: The figure (Figure 5.2 in this chapter) arranges the climatic regimes from the polar side to the equator: tundra, taiga-podsol zone, steppe, semi-desert and desert, savanna and tropical forest. Mark approximate latitudes from your atlas for each zone. Compare: in tundra and dry zones there is little or no chemical alteration and the weathering mantle is thin, whereas the weathering mantle is deepest under the tropical forest with high precipitation and temperature, with a clay mineral zone and zones of oxides of iron and aluminium.
Is this little motion which can occur sometimes due to weathering synonymous with transportation? If not, why?
Solution
No. Weathering is an in-situ (on-site) process, with very little or no motion of materials. Transportation is the movement of earth materials from one place to another by a mobile agent such as running water, ice or wind. The minor movement in weathering is not carried by an agent.
Between mass wasting and mass movements, which term do you feel is most appropriate? Why? Can solifluction be included under rapid flow movements? Why it can be and can't be?
Solution
Sample answer: Mass movements is the more appropriate term, because it describes what happens: the mass of debris is transferred down slopes under gravity, with no agent such as water, ice or wind carrying it. The term mass wasting suggests only loss.
Solifluction, the flow of water-soaked soil, is a flow movement and so can be placed under flow movements. But it is generally a slow movement, so it cannot be put under rapid flows. (The chapter does not discuss solifluction; this is an outside fact.)
Compared to the Himalayas, the Nilgiris bordering Tamilnadu, Karnataka, Kerala and the Western Ghats along the west coast are relatively tectonically stable and are mostly made up of very hard rocks; but, still, debris avalanches and landslides occur though not as frequently as in the Himalayas, in these hills. Why?
Solution
Many slopes in the Western Ghats and Nilgiris are steeper, with almost vertical cliffs and escarpments. Mechanical weathering due to temperature changes and ranges is pronounced. They also receive heavy amounts of rainfall over short periods. So there is almost direct rock fall quite frequently, along with landslides and debris avalanches.
Can you compare the three climatically controlled agents?
Solution
The three agents are wind, running water and glaciers, and they represent the three states of matter: wind is gaseous, running water is liquid and a glacier is solid. All three erode, transport and deposit, and the extent of their work is controlled by climatic conditions.
There is a shift of materials in mass movements as well as in erosion from one place to the other. So, why can't both be treated as one and the same? Can there be appreciable erosion without rocks undergoing weathering?
Solution
Mass movements are aided by gravity and no geomorphic agent like running water, glaciers, wind, waves or currents takes part. Erosion needs such an agent to acquire and transport the debris. So mass movements do not come under erosion, even though material shifts in both.
Erosion can be appreciable even without weathering: weathering aids erosion but is not a pre-condition for it, though erosion cannot be significant if rocks are not weathered.
Is weathering solely responsible for soil formation? If not, why?
Solution
No. Weathering gives the weathering mantle, the basic input, but soil formation also depends on five factors: parent material, topography, climate, biological activity and time. Organisms add humus and nitrogen, and climate supplies moisture and temperature.
Is it necessary to separate the process of soil formation and the soil forming control factors?
Solution
Yes, because they are different things. The process (pedogenesis) is what happens: weathering, colonisation by organisms, humus build-up and maturing of the soil. The control factors are the conditions that decide how it happens and with what result. The chapter notes that the factors act in union and affect one another.
Why are time, topography and parent material considered as passive control factors in soil formation?
Solution
Parent material and topography are called passive because they provide the base and set conditions (texture, exposure to sunlight, drainage) but do not themselves add anything to the soil. Time likewise only allows the soil-forming processes to work, deciding how mature the profile becomes. Climate and biological activity are active because they add moisture, heat and organic matter.
Depending upon the topography and materials around you, observe and record climate, possible weathering process and soil contents and characteristics.
Solution
Guidance: Prepare a table with columns for place, topography (slope, upland or flat), climate (temperature and rainfall), rock or parent material, visible weathering (cracks, flaking, rust-coloured stains, plant roots in rocks) and soil (colour, texture, humus, depth). Relate each observation to the chapter. For example, soil is thin on steep slopes and thick on flat uplands, and weathering is mostly chemical where rainfall and temperature are high.
Done with the answers?Now revise the whole chapter: Class 11 Geography notes
For CBSE Class 11 Geography (029), 2026-27: Fundamentals of Physical Geography (14 chapters) and India Physical Environment (6 chapters)
All NCERT exercises solved
Important exam questions in the CBSE pattern (MCQ, short and long answer) fully answered
US$2.99US$3.9920% off · all 20 chapters · instant PDF