Cambridge IGCSE Physics 0625: 199 Common Mistakes That Lose Marks | Notes Bazar Skip to content
Smart Notes for Every Exam · instant PDF download after payment +91 92520 37565
Home › Cambridge › IGCSE › Physics 0625 common mistakes
Free resource · Cambridge IGCSE Physics 0625

IGCSE Physics 0625: 199 common mistakes that lose marks

Most marks in Cambridge IGCSE Physics are lost to the same habits every year: a missing unit, a vague word where the mark scheme wants a precise one, a step skipped in an explanation. Below are 199 mistakes from 24 chapters, each with the correct version. Read the chapter you are revising, then try its questions.

Notes Bazar is independent and not endorsed by or affiliated with Cambridge University Press & Assessment. Cambridge IGCSE, AS & A Level are trademarks of Cambridge University Press & Assessment.

  1. Measurement and Motion
  2. Mass, Weight and Density
  3. Effects of Forces
  4. Moments and Centre of Gravity
  5. Momentum
  6. Energy and Work
  7. Energy Resources and Power
  8. Pressure
  9. The Kinetic Particle Model
  10. Thermal Properties and Temperature
  11. Transfer of Thermal Energy
  12. General Properties of Waves
  13. Reflection and Refraction of Light
  14. Lenses and Dispersion
  15. The Electromagnetic Spectrum
  16. Sound
  17. Magnetism
  18. Electrical Quantities
  19. Electric Circuits
  20. Electrical Safety and the Motor Effect
  21. Induction, Generators and Transformers
  22. The Nucleus and Nuclear Radiation
  23. Radioactive Decay and Half-life
  24. Space Physics

Chapter 1: Measurement and Motion

  • Reading the wrong graph. A horizontal line means "at rest" on a distance–time graph, but "constant speed" on a speed–time graph. Read the axis label first.
  • "Constant" on its own. Write "constant speed of 20 m/s" or "constant acceleration", never just "constant", and never "constant motion".
  • Area means acceleration? No: the area under a speed–time graph is the distance; the gradient is the acceleration.
  • Averaging speeds. Average speed = total distance ÷ total time, including stops. It is not the mean of the separate speeds.
  • One oscillation. It is a complete swing out and back (P → Q → P), not P → Q.
  • Vector without a direction. A resultant force or velocity needs magnitude and direction, and the angle must say what it is measured from ("53° east of north"). A compass point alone (e.g. "east") only earns credit if the diagram shows which way north is.
  • Using sin or cos instead of tan. With two perpendicular vectors you know the two shorter sides, so the angle comes from tan θ = opposite ÷ adjacent.
  • Tangent in the wrong place. Draw it at the time asked for, thin and long, and use a large triangle. Speed ÷ time from the origin is not the acceleration at that instant.
  • Terminal velocity explanations. Say: air resistance increases with speed → resultant force decreases → acceleration decreases → air resistance = weight → resultant force zero → constant speed. Do not write "it decelerates" while it is still speeding up.
  • Units and rounding. Write the equation, substitute, give the answer with its unit. Round only the final answer, normally to 2 or 3 significant figures. Change minutes to seconds and km to m when the answer is wanted in m/s.

Chapter 2: Mass, Weight and Density

  • Weight is a force, not "force per unit mass". Force per unit mass is the gravitational field strength. Weight = gravitational force on an object; unit N.
  • Dividing instead of multiplying. W = m × g (2.5 kg × 9.8 N/kg = 24.5 N), not m ÷ g.
  • Mass in grams in W = mg. Change grams to kilograms first: 250 g = 0.250 kg, W = 2.45 N.
  • Mass changes on the Moon? No: only the weight changes. Mass is the same everywhere.
  • Upside-down density. ρ = m ÷ V; dividing V by m is the most common wrong answer in multiple choice.
  • Wrong or missing unit for density. g/cm³ or kg/m³, matched to the units you used; 1 g/cm³ = 1000 kg/m³.
  • Gravity and the Sun. A planet's g depends on the planet (its mass and size), not on how far it is from the Sun.
  • Heavy things sink? Floating depends on density, not mass: a huge log floats, a small steel nail sinks.

Chapter 3: Effects of Forces

  • Extension vs length. Extension = stretched length − original length. Reading the graph at the length instead of the extension is the most common error.
  • "Balanced forces means it is not moving." Wrong: it is at rest or moving at constant speed in a straight line.
  • Resultant force without a direction. Write "100 N forwards" or "120 N to the right". A compass direction only counts if the diagram shows north.
  • Using one force in F = ma. F is the resultant force: subtract the resistive forces from the driving force first.
  • Unit of force. Write N. The answer "kg m/s²" is not accepted.
  • Significant figures. If the data are given to 2 s.f., give the answer to 2 s.f. (e.g. 2.0 m/s², not 2 m/s²).
  • Limit of proportionality. It is where the graph stops being a straight line, not where the spring breaks and not the highest point plotted.
  • Circular motion. The force is towards the centre (perpendicular to the velocity), not outwards and not along the direction of motion. When released, the object moves along the tangent, not outwards along the radius.
  • Friction. State both effects when asked: it opposes motion and it produces heating.

Chapter 4: Moments and Centre of Gravity

  • Moment = force ÷ distance? No: moment = force × perpendicular distance from the pivot. Write the equation before you rearrange it.
  • Distance from the end of the rule instead of from the pivot.
  • Not the perpendicular distance when the force is at an angle.
  • Units. N m (or N cm), not N/m. Keep all distances in the same unit within one calculation.
  • Forgetting the beam's own weight when the pivot is not at its centre (Extended).
  • Equilibrium needs both conditions: no resultant force and no resultant moment.
  • Stability answers. "A heavier base" only scores when linked to a lower centre of gravity; "a wider base" only scores when linked to the object having to tilt through a larger angle before the weight acts outside the base. "More surface area" is not an explanation.
  • Centre of gravity definition. The point through which the weight acts, not "the middle of the object".

Chapter 5: Momentum

  • Forgetting direction. Momentum and velocity are vectors: give a minus sign to motion in the opposite direction. A rebound means the change in momentum is the sum of the two sizes.
  • Impulse = force ÷ time? No: impulse = force × time for which it acts = change in momentum.
  • Resultant force definition. It is the change in momentum per unit time (rate of change of momentum), not "change in momentum".
  • "The soft floor reduces the impulse." Wrong: the change in momentum (impulse) is the same; it takes longer, so the force is smaller.
  • Assuming objects stick together. Read the question: objects that start at rest and push apart have zero total momentum after; colliding objects may bounce.
  • Wrong masses after sticking. Use the combined mass (m₁ + m₂) for the common velocity.
  • Contradictory definitions. Give one clear definition; two different ones may cancel the mark.
  • Units. Momentum in kg m/s (or N s); impulse in N s.

Chapter 6: Energy and Work

  • Sources instead of stores. "Hydroelectric", "tidal" or "geothermal" are energy resources, not stores. Water behind a dam has energy in its gravitational potential store.
  • Vague energy statements. Say which store increases or decreases: "the internal (thermal) store of the water decreases", not "the energy decreases".
  • Wrong transfer for horizontal motion. If an object moves horizontally, there is no change in its gravitational potential store.
  • Rearranging W = Fd. Work = force × distance, never force ÷ distance or distance ÷ time.
  • Using the wrong distance. Only the distance moved in the direction of the force: the vertical height for lifting (not the length or width of the stairs or slope).
  • Squaring the speed. Ek = ½mv²: square the speed only, then multiply by ½m.
  • "Energy is lost." Energy is never destroyed: it is transferred (dissipated) to the internal store of the surroundings.
  • Sankey totals. The input equals the sum of all outputs; the widths must be to scale.

Chapter 7: Energy Resources and Power

  • Boilers everywhere. Hydroelectric, tidal, wave and wind stations need only a turbine and a generator; solar cells need neither.
  • Solar cells vs solar panels. Cells produce electricity from light; panels heat water with infrared.
  • The Sun and all resources. Geothermal, nuclear and tidal energy do not come mainly from the Sun's radiation. Wind and waves do (uneven heating).
  • One-word advantages. "Cheap" or "clean" score little. Say why: "no carbon dioxide is released when it generates electricity, so it does not add to global warming".
  • Fusion and fission. Fusion (joining) happens in the Sun; nuclear power stations today use fission (splitting). Spell "fusion" carefully: an ambiguous spelling is not credited.
  • Power units. Change kW → W and minutes → s before using P = ΔE ÷ t.
  • Combining equations. For lifting: W = mg × h first, then P = W ÷ t.
  • Efficiency greater than 100% means the output and input have been swapped.

Chapter 8: Pressure

  • Upside-down equation. p = F ÷ A. Using F × A is the most common wrong answer.
  • Area units. 1 cm² = 1 × 10⁻⁴ m² (not 0.01 m²). Change cm² to m² before giving an answer in Pa, or give the answer in N/cm².
  • Rounding. Round only the final answer, and correctly (0.615 → 0.62, not 0.61).
  • Mass for force. The force on the ground is the weight in N (mass × 9.8), not the mass in kg.
  • Explaining everyday examples. Name both parts: "the area is larger, so the pressure is smaller (for the same force/weight)".
  • Liquid pressure and shape. Pressure depends on depth and density only, not on the width or shape of the container.
  • Δp = ρgΔh units. Density in kg/m³ and depth in m; a density in g/cm³ gives an answer 1000 times too small.

Chapter 9: The Kinetic Particle Model

  • Incomplete particle descriptions. Give arrangement, separation and motion; for a change of state, describe the change in both motion and separation.
  • Melting does not spread particles far apart. Liquid particles are still touching; only in a gas are they far apart.
  • "Liquid particles move faster" is not a difference in the type of motion. Say "vibrate about fixed positions" (solid) vs "move around / slide past each other" (liquid).
  • Brownian motion. The motion is random (not in one direction, not along smooth curves). It is caused by collisions with air molecules, not by the smoke being "less dense" or by convection.
  • "More collisions" is not enough. Say "more frequent collisions with the walls" (per second).
  • Constant temperature means constant speed. When a gas is compressed at constant temperature, the particles do not move faster: only the collision rate changes.
  • p and V are inversely proportional, not directly proportional, and the p–V graph is a curve, not a straight line.
  • Moveable piston. If the piston can move, heating increases the volume, not the pressure.
  • Absolute zero. It is −273 °C = 0 K, where the particles have the least kinetic energy.

Chapter 10: Thermal Properties and Temperature

  • Particles do not expand. When a solid expands, its particles move (vibrate) more and spread out a little; the particles themselves stay the same size.
  • "The temperature rises while melting." No: melting and boiling happen at constant temperature while energy is supplied.
  • Evaporation vs condensation. Evaporation is liquid → gas at the surface; condensation is gas → liquid.
  • Boiling vs evaporation answers. Give separate, clear differences: boiling only at the boiling point, evaporation at any temperature; boiling throughout the liquid (bubbles), evaporation at the surface only.
  • Why evaporation cools. Say that the more energetic particles leave, so the average kinetic energy of the remaining particles falls.
  • High specific heat capacity heats faster? No: a higher c means more energy is needed per °C, so the object takes longer to heat with the same heater.
  • Mass in grams in ΔE = mcΔθ. With c in J/(kg °C), the mass must be in kg.
  • Bimetallic strip. The strip bends towards the metal that expands less (that metal is on the inside of the curve).

Chapter 11: Transfer of Thermal Energy

  • Radiation and vacuum. Thermal (infrared) radiation needs no medium and crosses a vacuum; conduction and convection cannot.
  • Air conducts badly. Trapped air is a good insulator; the air must be trapped so convection cannot happen.
  • Convection and density. Say that the fluid expands and its density decreases, so it rises. Do not say that the particles become less dense or that the particles expand. In a liquid, convection is the movement of the liquid as a whole.
  • "Heat rises." Write "warm air (or warm water) rises" instead.
  • Convection in solids. It cannot happen: solids cannot flow.
  • Name the process, not a change of state. If asked how energy is transferred, answer conduction, convection or radiation, not "melting" or "evaporation".
  • Colour and texture. Dull black: best emitter and absorber; shiny silver/white: best reflector, worst emitter and absorber.
  • Fair tests. Equal distances from the heater or detector; same volume and starting temperature of water; same size cans.
  • Insulated containers. If a container is insulated, it does not gain heat from the surroundings either.

Chapter 12: General Properties of Waves

  • Amplitude is from the centre (rest) line to a crest, not from crest to trough.
  • Wavelength is from one crest to the next crest (one complete wave), not crest to trough. Read the diagram carefully: count how many whole waves are shown.
  • Unit conversions. Change cm to m before using v = fλ with v in m/s; MHz = 10⁶ Hz; kHz = 10³ Hz.
  • Using speed = distance ÷ time with frequency in place of time: use v = fλ.
  • Frequency is fixed by the source: it does not change on reflection, refraction or diffraction. In refraction the speed and wavelength change together.
  • Refraction explained. Say it is due to a change of speed (and wavelength) caused by a change of depth (or medium), not just "the wave bends".
  • Diffraction. Most spreading when the gap is about the wavelength. To diffract more through a fixed gap, decrease the frequency (longer wavelength), with the speed unchanged.
  • Transverse vs longitudinal examples. Light and water waves are transverse; sound is longitudinal; seismic S = transverse, P = longitudinal.

Chapter 13: Reflection and Refraction of Light

  • Measuring from the surface. i, r and c are measured from the normal.
  • Image description. A plane-mirror image is virtual, same size, same distance behind the mirror (and upright). "Behind the mirror" alone is not a characteristic.
  • Bending the wrong way. Into glass: towards the normal. Out of glass: away from the normal.
  • TIR with a refracted ray. When i is greater than c, there is no refracted ray: all the light is reflected.
  • TIR direction. TIR only happens when light goes from the denser medium (glass, water) towards the less dense one (air).
  • Refractive index and speed. n = speed in air ÷ speed in medium; so speed in glass = 3.0 × 10⁸ ÷ n (do not multiply by n). Use the speed ratio, not sin i ÷ sin r, when speeds are given.
  • Significant figures and units. Give the speed with its unit (m/s) to the same significant figures as the data; n has no unit.
  • Critical angle definition. The angle of incidence in the denser medium for which the angle of refraction is 90°.
  • Optical fibre answers. Name total internal reflection and say the angle of incidence is greater than the critical angle.

Chapter 14: Lenses and Dispersion

  • Bending the centre ray. The ray through the optical centre goes straight on: it is not deviated along the principal axis.
  • Parallel ray not through F. After the lens, the parallel ray must pass through F on the far side, drawn with a ruler from the lens line.
  • Incomplete image descriptions. Give all three: size (enlarged / same size / diminished), way up (upright / inverted), real or virtual. If asked to underline two words, underline two.
  • Magnifying glass. The object must be between F and the lens, and the eye on the other side of the lens, looking through it (not at the image position).
  • Virtual images cannot be formed on a screen; draw the backward extensions dashed.
  • Sight correction the wrong way round. Short sight → diverging; long sight → converging.
  • Dispersion vs refraction or diffraction. The splitting of white light into colours is dispersion.
  • Colour order. Red has the longest wavelength and lowest frequency; violet the shortest wavelength and highest frequency.

Chapter 15: The Electromagnetic Spectrum

  • Order reversed. Radio has the longest wavelength; gamma the shortest. X-rays do not have the longest wavelength.
  • Different speeds. All EM waves travel at the same speed (3.0 × 10⁸ m/s) in a vacuum; radio and gamma rays are equally fast.
  • Vague uses. "Used in scans" is not enough: say "X-rays for images of broken bones" or "UV for detecting fake bank notes". UV is not used for X-ray images or mobile phones.
  • Longer than infrared? Only microwaves and radio waves have longer wavelengths than infrared.
  • Sun's radiation. Most of the Sun's energy reaches us as infrared, visible light and ultraviolet (not X-rays or gamma rays).
  • Satellites. Satellite communication is mainly by microwaves. Geostationary satellites stay over the same place (24 h orbit).
  • Digital benefits. Name both: higher data rate, and greater range because the signal can be regenerated accurately.
  • Units in f = v/λ. Use metres and hertz; GHz = 10⁹ Hz, MHz = 10⁶ Hz.

Chapter 16: Sound

  • Forgetting to halve the time (or double the distance) for echoes: the sound goes there and back.
  • Using the speed of light for sound, or a liquid speed for air. Sound in air: about 330–350 m/s.
  • Sound is longitudinal, not transverse; it cannot travel through a vacuum.
  • Ultrasound definition. "Sound with a frequency above 20 kHz", not "sound we cannot hear" (that also includes below 20 Hz) and not "used for scans".
  • Pitch is frequency. A deeper (lower) sound has a lower frequency, not the same frequency.
  • kHz and MHz. 1 kHz = 1000 Hz; 1 MHz = 10⁶ Hz. Convert before using v = fλ.
  • Comparing ultrasound and X-ray scans. Ultrasound images come from reflections at tissue boundaries and are safe; X-ray images come from absorption by bone and X-rays are ionising. Compare the scans, not the wave types.

Chapter 17: Magnetism

  • Attraction does not prove a magnet. Only repulsion shows that an object is magnetised. Describe testing both ends.
  • Field direction. Field lines go from N to S outside a magnet; the direction is the way an N pole would be pushed. Not towards both poles.
  • Arrows. Every field line needs an arrow; lines must not cross or touch the magnet except at the ends.
  • Iron filings show the pattern, not the direction; a compass is needed for direction.
  • Soft iron vs steel. Soft iron: temporary (easily magnetised and demagnetised). Steel: permanent.
  • Non-magnetic metals. Copper, aluminium and brass are metals but are not magnetic.
  • Field strength (S). Shown by the spacing of the lines, not by their length.

Chapter 18: Electrical Quantities

  • Rearranging V = IR wrongly. R = V ÷ I (12 ÷ 0.50 = 24 Ω), not V × I.
  • Power confused with resistance. P = I × V; it is not V ÷ I.
  • Energy equation. E = I × V × t, with t in seconds (or use kW and hours for kW h).
  • Meters in the wrong place. A voltmeter in series with the ammeter is wrong; it goes across the component.
  • Charging. Only electrons move; positive charges never move in charging by friction.
  • e.m.f. definition. It is the work done (energy) per unit charge round the complete circuit; "the voltage of a battery" is not a definition, and e.m.f. is not a force.
  • Electric field direction (S). The direction of the force on a positive charge: away from +, towards −.
  • Area vs diameter (S). Doubling the diameter quadruples the area, so the resistance becomes a quarter.
  • Lamp graph (S). The resistance of a filament lamp increases as it gets hotter, so the I–V graph curves (less steep).

Chapter 19: Electric Circuits

  • "Current is used up." The current is the same at every point in a series circuit; energy is transferred, but charge is not used up.
  • Parallel resistance. It is less than the smallest single resistor; 1/R = 1/R₁ + 1/R₂, then invert. Forgetting to invert is a common slip.
  • Thermistor and LDR direction. Hotter → thermistor resistance falls; brighter → LDR resistance falls.
  • Potential divider output. Say which component the output is across; explain using "share of the p.d." and the resistance change.
  • Relay. It is a switch operated by an electromagnet: the coil circuit and the switched circuit are separate.
  • LEDs and diodes. Current only in the direction of the triangle (forward); know the symbol.
  • Lighting circuits. State the advantages: full p.d. for each lamp, independent switching, others stay on if one fails.
  • Symbols. Use the syllabus symbols (resistor = rectangle; lamp = circle with a cross).

Chapter 20: Electrical Safety and the Motor Effect

  • Fuse rating. Choose the smallest standard rating that is larger than the normal current (not equal to or far above it).
  • Why the fuse is in the live wire. So that when it melts the appliance is disconnected from the high p.d.; give this reason, not just "for safety".
  • Earth wire. It carries the large fault current that melts the fuse; it does not "absorb" electricity or protect against all faults by itself.
  • Field around a wire. Circles, not radial lines; arrows on every circle; spacing increases with distance (S).
  • Left vs right hand. Right-hand grip rule for the field of a current; left-hand rule for the force on a current in a field.
  • Electron beams (S). Conventional current is opposite to the electrons' motion.
  • Motor factors. More turns, more current, stronger field. Not "bigger battery" without saying more current.
  • Commutator. It reverses the current in the coil every half turn so the turning effect stays in the same direction.

Chapter 21: Induction, Generators and Transformers

  • "Magnet inside the coil induces a current." Only while it is moving (changing field).
  • Speed does matter. A faster movement induces a larger e.m.f.
  • Generator peaks (S). Maximum e.m.f. when the coil plane is parallel to the field (sides cutting fastest); zero when the coil is perpendicular to the field, even though the field through the coil is then largest.
  • Slip rings vs commutator. Slip rings in an a.c. generator; a split-ring commutator in a d.c. motor.
  • Transformer equation. Write Vp/Vs = Np/Ns, substitute, then rearrange. Cross-multiplying carelessly gives the inverse.
  • Transformers and d.c. They need a.c.: a changing current is needed to give a changing field.
  • High-voltage advantage. Say "smaller current, so less energy lost as heat (I²R) in the cables"; "less energy loss" alone is incomplete.
  • Right vs left hand. Right-hand rule for generators (induced current); left-hand rule for motors (force).

Chapter 22: The Nucleus and Nuclear Radiation

  • Proton number and nucleon number mixed up. A (top) = protons + neutrons; Z (bottom) = protons.
  • Nature of β. It is an electron (from the nucleus); "negative charge" alone does not describe its nature.
  • Ionising vs penetrating. α is the most ionising and the least penetrating; γ the reverse.
  • Background sources. Radon, rocks and buildings, food and drink, cosmic rays. Radio and TV waves are not ionising.
  • Corrected count rate (S). Subtract the background count rate (and convert both to the same time unit first).
  • Deflection (S). γ is not deflected; β deflects more than α and in the opposite direction.
  • Alpha scattering (S). Link each observation to its conclusion: straight through → empty space; large deflection → small, massive, positive nucleus.
  • Fusion and fission (S). Spell them clearly: an ambiguous spelling does not score. Fission splits heavy nuclei; fusion joins light nuclei.

Chapter 23: Radioactive Decay and Half-life

  • Dividing the half-life. If 3 half-lives are needed, multiply: 3 × 29 = 87 years (not 29 ÷ 3).
  • Halving the time instead of the quantity. Find when the count (or mass) has halved, not when half the time has passed.
  • Background (S). Subtract the background before halving, and add it back when predicting a measured value.
  • Choosing α because it is "safe". For thickness monitoring and tracers α is useless: it would not get through. Match the radiation to the penetration needed.
  • β-decay (S). The emitted electron comes from a neutron in the nucleus changing into a proton; it is not an orbiting electron.
  • Decay equations (S). Check that both A and Z balance; the element symbol must match the new proton number.
  • Safety answers. Name the method (time, distance, shielding) and say how it reduces the dose.
  • Effects on cells. Cell death, mutation, cancer: "radiation sickness" alone is not enough.

Chapter 24: Space Physics

  • Light-year as a time. It is a distance: the distance light travels in one year.
  • Not converting days to seconds in v=2πr/Tv = 2\pi r/T (gives an answer far too large).
  • Wrong equation. Using 2πr/T2\pi r/T for a straight-line distance, or H0=v/dH_0 = v/d for light travel within the Solar System.
  • Forgetting the return journey for a reflected signal.
  • Linking g to distance from the Sun. Surface g depends on the planet's mass.
  • "Bigger orbit, so faster" (S). Outer planets move more slowly because the Sun's field is weaker there.
  • "Doppler effect" instead of redshift, or redshift of planets or stars: it is light (electromagnetic radiation) from distant galaxies.
  • CMBR (S): "Big Bang" alone is not enough; say it was produced shortly after the Universe formed and stretched into microwaves by the expansion.
  • Life cycle (S): red supergiant (not red giant) for massive stars; massive stars leave a neutron star or black hole, not a white dwarf.
  • Measuring distance (S): "the brightness of a supernova in the galaxy", not just "distance" or "redshift".
  • Units. Give units for every answer, including H₀ (s⁻¹).
Want the full chapter, not just the mistakes? Our IGCSE Physics 0625 notes cover every syllabus statement with worked examples, 20 MCQs per chapter and original exam-style questions with full mark schemes.

Prices shown in US dollars. Show prices in: ₹ INR · US$ USD