Cambridge IGCSE Mathematics 0580: 150 Common Mistakes That Lose Marks | Notes Bazar Skip to content
Smart Notes for Every Exam · instant PDF download after payment +91 92520 37565
Home › Cambridge › IGCSE › Mathematics 0580 common mistakes
Free resource · Cambridge IGCSE Mathematics 0580

IGCSE Mathematics 0580: 150 common mistakes that lose marks

Most marks in Cambridge IGCSE Mathematics are lost to the same habits every year: a missing unit, a vague word where the mark scheme wants a precise one, a step skipped in an explanation. Below are 150 mistakes from 26 chapters, each with the correct version. Read the chapter you are revising, then try its questions.

Notes Bazar is independent and not endorsed by or affiliated with Cambridge University Press & Assessment. Cambridge IGCSE, AS & A Level are trademarks of Cambridge University Press & Assessment.

  1. Number: Types, Sets and Fractions
  2. Indices, Standard Form and Surds
  3. Accuracy, Calculators, Time and Money
  4. Ratio, Proportion and Rates
  5. Percentages, Growth and Decay
  6. Algebraic Manipulation
  7. Equations and Formulas
  8. Inequalities
  9. Sequences
  10. Direct and Inverse Proportion
  11. Graphs in Practical Situations
  12. Graphs of Functions and Sketching Curves
  13. Differentiation
  14. Functions
  15. Coordinate Geometry
  16. Geometrical Terms, Constructions and Symmetry
  17. Angles and Similarity
  18. Circle Theorems
  19. Mensuration
  20. Pythagoras and Trigonometry
  21. Sine Rule, Cosine Rule and 3D Trigonometry
  22. Transformations
  23. Vectors
  24. Probability
  25. Statistics: Averages, Charts and Scatter Diagrams
  26. Cumulative Frequency and Histograms

Chapter 1: Number: Types, Sets and Fractions

  • HCF and LCM swapped. Candidates often find the right primes and then give the LCM when asked for the HCF (or the reverse).
  • Product of primes. Listing all factors (1, 2, 3, 6, 7, …) instead of primes; including 1 as a prime; leaving 2×3×32 \times 3 \times 3 unsimplified when an index form is asked, or multiplying it back to the number.
  • Reciprocal. Not knowing the word: the reciprocal of 13\frac{1}{3} is 3, not 0.33.
  • Mixed numbers. Working with the fraction parts separately and forgetting the whole numbers; not giving the answer as a mixed number when the question asks.
  • Recurring decimals (E). Reading 0.26˙0.2\dot{6} as 0.2626…0.2626\ldots; ignoring the dot.
  • Venn diagrams. Putting the total of a set in its "only" region; forgetting the intersection when asked for n(A)n(A); shading instead of writing numbers.
  • Large numbers in words. 7 000 000 000 is seven billion (not seventy million or seven thousand million).

Chapter 2: Indices, Standard Form and Surds

  • Index laws. Multiplying indices when multiplying terms (x4×x6≠x24x^4 \times x^6 \ne x^{24}); dividing indices when dividing terms.
  • Negative indices. Giving negative answers: 4−2=1164^{-2} = \frac{1}{16}, not −16-16 or −8-8.
  • Only the value asked. If asked for pp in 6p=366^p = 36, give 2, not 36.
  • Standard form. More than one digit before the decimal point (e.g. 41.8×102241.8 \times 10^{22}); changing the sign of the index instead of the value.
  • Surds (E). Adding unlike surds (27+12≠39\sqrt{27} + \sqrt{12} \ne \sqrt{39}); writing 12=43\sqrt{12} = 4\sqrt{3} instead of 232\sqrt{3}; using the wrong conjugate when rationalising.
  • Fractional indices (E). Ignoring the negative sign in 8−238^{-\frac{2}{3}}.

Chapter 3: Accuracy, Calculators, Time and Money

  • Too few significant figures. Answers given to 2 s.f. or 1 s.f. when 3 s.f. are needed; premature rounding in the working.
  • Rounding 5.5 down. 5.5 to 1 s.f. is 6.
  • Bounds of calculations (E). Using the rounded values (e.g. 5013\frac{50}{13}) instead of the bounds; using upper ÷ upper for an upper bound of a quotient.
  • Mixed units. Working in grams but not converting back to kilograms when the answer is asked in kg.
  • Exchange rates. Multiplying when you should divide; mixing currencies in one calculation.
  • Time. Treating time as a decimal: 1 h 45 min is 1.75 h, not 1.45 h.

Chapter 4: Ratio, Proportion and Rates

  • Ratios to fractions. In the ratio 1 : 4 the fraction is 15\frac{1}{5}, not 14\frac{1}{4}.
  • Mixed units in ratios and rates (cm with m, minutes with hours).
  • Time as a decimal. 1 h 45 min is 1.75 h, not 1.45 h.
  • Average speed (E). Averaging two speeds instead of using total distance ÷ total time.
  • Inverse proportion. Using direct proportion when more workers means less time.

Chapter 5: Percentages, Growth and Decay

  • Reverse percentages. Finding the percentage of the new amount and adding or subtracting it.
  • Percentage change. Dividing by the new value instead of the original.
  • Compound interest. Using simple interest; giving the interest when the total value is asked (or the reverse).
  • Repeated changes. Adding percentages: +20% then −20% is not 0%.
  • Rounding money. Give money to 2 decimal places; do not round in the middle.

Chapter 6: Algebraic Manipulation

  • Not factorising fully. 12x2+18x=2(6x2+9x)12x^2 + 18x = 2(6x^2 + 9x) is not fully factorised; leaving out the common factor in the answer.
  • Factorise vs simplify. Writing 7x+3y=10xy7x + 3y = 10xy or answering "21xy" when asked to factorise.
  • Three brackets (E). Multiplying the brackets "in pairs" twice instead of expanding two, then multiplying by the third.
  • Signs. −2(x−4)=−2x+8-2(x - 4) = -2x + 8; brackets round numerators when subtracting fractions.
  • Cancelling terms (E). x+6x+3≠2\frac{x + 6}{x + 3} \ne 2; cancel only whole factors.
  • Multiplying out to clear fractions. Forgetting to multiply a whole-number term by the denominator.

Chapter 7: Equations and Formulas

  • Elimination signs. Subtracting the xx terms correctly but adding the constants.
  • Substituting back. Using the equation you just rearranged to check; sign errors with negative values.
  • Rearranging. Applying an operation to only one term: from g=h3+8g = \frac{h}{3} + 8, h=3(g−8)h = 3(g - 8), not 3g−83g - 8.
  • Fractional equations. Forgetting to multiply the whole-number term (e.g. the 1) by the denominator.
  • Method asked (E). Using the formula when the question says "by factorising".
  • Working with π (E). Replacing π by 3.14 too early instead of keeping it in exact form.

Chapter 8: Inequalities

  • Circles on number lines. Dots or vertical lines instead of circles; filled and open circles the wrong way round; no line between them.
  • Writing the inequality. Putting the sign between the numbers ("−4 < 3") instead of −4<x≤3-4 < x \le 3.
  • Dividing by a negative. Forgetting to reverse the sign.
  • Line styles (E). Solid lines for strict inequalities, or broken lines for ≤ and ≥.
  • Equations of boundaries (E). Giving "y≥−1y \ge -1" when the equation of the line (y=−1y = -1) is asked.
  • Integers. Giving non-integer values or values outside the range when integers are asked.

Chapter 9: Sequences

  • Term-to-term vs nnth term. Giving "+7" when the nnth term is asked, or the reverse; writing "7" without the operation.
  • Using a+(n−1)da + (n - 1)d wrongly. Substituting the wrong values; giving n+4n + 4 instead of 4n+c4n + c.
  • "nnth term" is not "9th term". Give an expression in nn.
  • Going backwards. Finding the term before the start when the next term is asked.
  • Non-consecutive terms. Using the gap between given terms as the common difference.
  • Recognising special numbers. Not spotting cube numbers (the 10th cube number is 1000).

Chapter 10: Direct and Inverse Proportion

  • No constant. Writing y=x2y = x^2 or "y=19y = \frac{1}{9}" without introducing kk.
  • Wrong form. Using y=kxy = kx when the question says "the square of xx"; using kxkx instead of kx\frac{k}{x} for inverse proportion.
  • Only the constant. Finding kk and stopping, or giving the equation when a value is asked.
  • Fraction answers. Leave an exact answer such as 93 rather than an unsimplified fraction.

Chapter 11: Graphs in Practical Situations

  • Gradient upside down. Calculating time ÷ distance (giving 5 instead of 0.2).
  • Acceleration vs deceleration (E). Finding the wrong section; giving a negative deceleration.
  • Area (E). Multiplying speed by time only for the top section; missing the triangles.
  • Completing a travel graph. Leaving out a rest (horizontal line) or using the wrong time scale.
  • Average speed. Leaving out stopped time from the total time.

Chapter 12: Graphs of Functions and Sketching Curves

  • Substituting negatives. −22-2^2 entered as −4-4 instead of (−2)2=4(-2)^2 = 4.
  • Joining points with straight lines or making a flat or pointed bottom on a quadratic.
  • Reciprocal graphs (E). Joining the branches across x=0x = 0.
  • Wrong line for a graphical solution (E). Rearrange carefully so one side matches the drawn graph exactly.
  • Too few solutions. A cubic can meet a line three times; give every intersection in the range.
  • Using a formula method when the question says "use your graph".

Chapter 13: Differentiation

  • Factorising instead of differentiating (e.g. writing x(3−x2)x(3 - x^2) for "find dydx\frac{dy}{dx}").
  • Constants. Leaving a constant in the derivative, or differentiating 4x4x to 4x0x4x^0 x.
  • Substituting into the wrong equation. Using dydx\frac{dy}{dx} to find the yy-coordinate.
  • Only one stationary point. A quadratic dydx\frac{dy}{dx} usually gives two xx-values.
  • Mixing up the variables. Differentiating dydx\frac{dy}{dx} again when asked for yy, or the reverse.

Chapter 14: Functions

  • Composite as a product. Writing fg(x)=(2x+5)(x−4)fg(x) = (2x + 5)(x - 4).
  • Order of a composite. fg(x)fg(x) means gg first.
  • Inverse as reciprocal. Writing g−1(x)=16−2xg^{-1}(x) = \frac{1}{6 - 2x} for the inverse of g(x)=6−2xg(x) = 6 - 2x.
  • Simplifying. Errors after a correct substitution, especially with signs and brackets.
  • Using numbers only. Finding f−1f^{-1} of one value when the expression is asked.

Chapter 15: Coordinate Geometry

  • Gradient upside down. x2−x1y2−y1\frac{x_2 - x_1}{y_2 - y_1} instead of y2−y1x2−x1\frac{y_2 - y_1}{x_2 - x_1}.
  • Midpoint by subtracting. The midpoint uses the mean of the coordinates.
  • Lines of symmetry. "x=0.5x = 0.5" not "0.5" or "y=0.5y = 0.5".
  • Perpendicular through the wrong point. Read whether the line goes through the midpoint or a given point PP.
  • Using y=mx+cy = mx + c. Correct intercept but wrong gradient read from the scale.

Chapter 16: Geometrical Terms, Constructions and Symmetry

  • Bearings. Measuring anticlockwise or from the wrong point; writing 65° instead of 065°; adding 180 when the answer must be subtracted (results over 360°).
  • Constructions. Rubbing out the arcs; using a protractor when "compasses only" is asked.
  • Shortest distance. The shortest distance from a point to a line is the perpendicular distance.
  • Symmetry. Thinking a parallelogram has lines of symmetry; giving "order 0" (the lowest order is 1).
  • Names of solids and parts of a circle. Confusing segment and sector, chord and tangent.

Chapter 17: Angles and Similarity

  • Reasons. Finding the angle correctly but giving no reason or a vague one ("parallel lines").
  • Mixing up angle pairs. Using corresponding when the angles are alternate (both give equal angles, but the reason must be correct).
  • Polygon formula. Errors in (n−2)×180(n - 2) \times 180; dividing the interior angle sum by the wrong number.
  • Similarity. Using the part length (DBDB) instead of the whole side (ABAB); using kk instead of k2k^2 or k3k^3 for areas and volumes.
  • Similar vs congruent. Similar shapes need not be the same size.

Chapter 18: Circle Theorems

  • Wording. "Cyclic" must go with "quadrilateral" and "opposite angles"; "angle in a semicircle" not "triangle in a semicircle".
  • Missing a reason. Giving only one of two reasons (e.g. forgetting "angle sum of a triangle").
  • Calculations as reasons. "180 − 34 − 90" is working, not a reason.
  • Assuming. Treating a marked angle as being at the centre, or halving an angle that is not at the centre.
  • Alternate segment (E). Matching the tangent–chord angle with an angle in the wrong segment.

Chapter 19: Mensuration

  • Surface area vs volume. Giving one when the other is asked; wrong units (cm² for volume).
  • Circle formulas. Using area instead of circumference; forgetting to halve for a semicircle.
  • Perimeter of compound shapes. Including inside lines, or leaving out the straight sides.
  • Sectors (E). Finding the whole circle area; using 3.14 or a rounded value of π too early.
  • Compound solids (E). Using the slant height as the height; forgetting to add the hemisphere radius to the cone height; including joined faces in the surface area.
  • Unit conversion. 1 m² = 100 cm² is wrong; it is 10 000 cm².

Chapter 20: Pythagoras and Trigonometry

  • Exact values (E). Not identifying which exact value is needed, or quoting a wrong value; assuming a 3, 4, 5 triangle without justification.
  • Pythagoras. Adding squares when finding a shorter side; forgetting to square root.
  • Wrong ratio. Using sin when the sides are opposite and adjacent.
  • Accuracy. Rounding to 2 s.f.; angles not to 1 d.p.; calculator in radians.
  • Equations (E). Giving only the calculator value and missing the second solution.
  • Shortest distance (E). Not using a perpendicular.

Chapter 21: Sine Rule, Cosine Rule and 3D Trigonometry

  • Premature rounding. Rounding a length (e.g. to 11.1) before using it again loses accuracy marks; giving 6.9 instead of 3 s.f. Examiners do not imply method from 2 s.f. values.
  • Using the sine or cosine rule in a right-angled triangle. It is correct but slower and leads to errors; check for a right angle first.
  • Unclear angle. Not saying which angle is being found, then using it in the wrong place.
  • Bearings. Finding the angle inside the triangle but not adding it to (or subtracting it from) the given bearing.
  • Cosine rule slips. Working out b2+c2−2bcb^2 + c^2 - 2bc first and then multiplying by cos⁡A\cos A.
  • Ambiguous case. Missing the obtuse answer 180°−x180° - x when the diagram shows an obtuse angle.
  • 3D. Using the wrong angle for "the angle between a line and a plane"; not finding the base diagonal first.

Chapter 22: Transformations

  • Wrong words. "Turn", "flip", "move", "translocation", "transition" instead of rotation, reflection, translation.
  • Two transformations given when a single one is asked for, e.g. enlargement plus a translation: no marks.
  • Missing details. A rotation without its direction or centre; an enlargement without its centre.
  • Scale factor. Written as "double" or as a ratio 1 : 2 instead of the number 2.
  • Centre of enlargement. Given as a column vector, with xx and yy reversed, or as a corner of the image instead of the meeting point of the rays.
  • Mirror lines. Writing "−3" or "yy-axis = −3" instead of y=−3y = -3; confusing x=kx = k and y=ky = k.
  • Translations. Using the top of the vector as the vertical move; images drawn not congruent.

Chapter 23: Vectors

  • Sign errors in subtracting negative components; travelling against an arrow without changing the sign.
  • Fraction lines drawn between the components of a column vector.
  • Coordinates for vectors. Giving (4,−4)(4, -4) when (4−4)\begin{pmatrix} 4 \\ -4 \end{pmatrix} is needed, or a vector when a magnitude is asked for.
  • Position vectors. Not knowing that the position vector of SS is OS→\overrightarrow{OS}.
  • Not simplifying. Answers left as p+q−p\mathbf{p} + \mathbf{q} - \mathbf{p} or with brackets unexpanded.
  • Ratios. Using 12\frac{1}{2} instead of 13\frac{1}{3} when AP:PB=1:2AP : PB = 1 : 2.
  • Collinear. Showing only that vectors are parallel, without the common point.

Chapter 24: Probability

  • Subtracting from 100 instead of 1 (e.g. 100 − 0.6).
  • Adding instead of multiplying along branches, or multiplying the wrong pair (e.g. 0.6 × 0.75 for the wrong route).
  • Rounding. Converting to a percentage or decimal and giving only 2 s.f.; leaving out the % sign.
  • Wrong event. "At least 10" answered as "less than 10"; "not" missed.
  • Without replacement (E). Not reducing the numerator and the denominator on the second branch.
  • Fractions not simplified when the question asks for the simplest form.

Chapter 25: Statistics: Averages, Charts and Scatter Diagrams

  • Stem-and-leaf. Leaves not in order; a missing key; median given as the leaf only (6 instead of 46).
  • Median. Using the n2\frac{n}{2}th value; finding it from an unordered list; confusing mean and median.
  • Frequency tables. Dividing by the number of classes instead of the total frequency; finding the mean of the frequencies.
  • Grouped mean (E). Using class widths or upper bounds instead of midpoints.
  • Pie charts. Writing 135360\frac{135}{360} as 0.38 (2 s.f.) or not simplifying the fraction.
  • Correlation. Describing the relationship as "positive" when it is negative; lines of best fit that are not ruled or do not cover the data.
  • Comparisons. Comparing only one measure, or quoting numbers without saying what they mean in context.

Chapter 26: Cumulative Frequency and Histograms

  • Plotting at midpoints (or lower bounds) instead of upper bounds; joining with straight lines when a curve is asked for, or not starting at the lowest bound with cumulative frequency 0.
  • Reading the wrong axis: giving the cumulative frequency (e.g. 40) as the median instead of the value on the horizontal axis.
  • "More than" questions: forgetting to subtract the reading from the total.
  • IQR: giving the two quartiles but not subtracting.
  • Histograms: plotting frequency instead of frequency density; using bar heights instead of areas to find frequencies; leaving gaps between bars.
  • Part of a class: taking the whole frequency instead of the fraction of the class needed.
Want the full chapter, not just the mistakes? Our IGCSE Mathematics 0580 notes cover every syllabus statement with worked examples, 20 MCQs per chapter and original exam-style questions with full mark schemes.

Prices shown in Indian rupees. Show prices in: ₹ INR · US$ USD