Cambridge IGCSE Chemistry 0620: 158 Common Mistakes That Lose Marks | Notes Bazar Skip to content
Smart Notes for Every Exam · instant PDF download after payment +91 92520 37565
Home › Cambridge › IGCSE › Chemistry 0620 common mistakes
Free resource · Cambridge IGCSE Chemistry 0620

IGCSE Chemistry 0620: 158 common mistakes that lose marks

Most marks in Cambridge IGCSE Chemistry are lost to the same habits every year: a missing unit, a vague word where the mark scheme wants a precise one, a step skipped in an explanation. Below are 158 mistakes from 22 chapters, each with the correct version. Read the chapter you are revising, then try its questions.

Notes Bazar is independent and not endorsed by or affiliated with Cambridge University Press & Assessment. Cambridge IGCSE, AS & A Level are trademarks of Cambridge University Press & Assessment.

  1. States of Matter
  2. Atoms, Elements and Isotopes
  3. Bonding and Structure
  4. Formulae, Equations and Relative Masses
  5. The Mole and Calculations
  6. Electrolysis and Fuel Cells
  7. Chemical Energetics
  8. Chemical Changes and Rates of Reaction
  9. Reversible Reactions and Equilibrium
  10. Redox
  11. Acids, Bases and Oxides
  12. Preparation of Salts
  13. The Periodic Table
  14. Metals, Alloys and Reactivity
  15. Corrosion and Extraction of Metals
  16. Water and Fertilisers
  17. Air Quality and Climate
  18. Organic Chemistry: Fuels and Alkanes
  19. Alkenes, Alcohols and Carboxylic Acids
  20. Polymers
  21. Experimental Techniques and Separation
  22. Identification of Ions and Gases

Chapter 1: States of Matter

  • Mixing up separation, arrangement and motion. "Regular" is arrangement; "close together" is separation; "vibrate" is motion. Answer the one that is asked.
  • Bulk properties instead of particles. "A gas fills its container" is a property; the question may want "particles are far apart and move randomly".
  • Particles in a solid "do not move". They vibrate about fixed positions.
  • Particles expanding. When a gas expands the particles move further apart; the particles themselves do not get bigger.
  • Flat sections (S). Energy overcomes the forces of attraction between the particles; it does not break bonds inside molecules.
  • Cooling curves. The flat section for condensing is at the boiling point: the same temperature as boiling.
  • Diffusion definition. Give the direction (high to low concentration) and the cause (random motion of particles).
  • Mr and rate (S). Lower Mr → faster diffusion. Say "relative molecular mass", not "the gas is lighter" alone.

Chapter 2: Atoms, Elements and Isotopes

  • Mixtures vs compounds. A mixture is not chemically combined; a compound is chemically bonded in a fixed ratio. "Molecule" does not mean "compound": O₂ is a molecule of an element.
  • Order of the Periodic Table. Elements are arranged by proton number, not by nucleon number or mass.
  • Neutrons and nucleons. Nucleon number = protons + neutrons. Neutrons = nucleon number − proton number.
  • Ions. Only electrons change: Ca²⁺ has 20 protons and 18 electrons. Do not change the number of protons.
  • Isotopes. Same number of protons (same element), different number of neutrons. Do not write "different number of protons" or "isomers".
  • Same chemical properties (S). Because of the same number of electrons / same electronic configuration; "same number of protons" alone is not enough.
  • Aᵣ calculations (S). Multiply each isotopic mass by its abundance, add, divide by 100. Show working. Aᵣ is an average for one atom; it is not the mass of the molecule.

Chapter 3: Bonding and Structure

  • Ionic bonds "share" electrons. In ionic bonding electrons are transferred; sharing is covalent.
  • Dot-and-cross diagrams. Brackets and charges on ions; correct number of electrons on every outer shell; shared pairs in the overlap; include lone pairs (e.g. two on O in H₂O).
  • Ions vs electrons. Molten ionic compounds conduct because ions move, not electrons. Metals and graphite conduct because electrons move.
  • Simple molecules (S). Boiling breaks the weak intermolecular forces, not the covalent bonds. Do not write "weak covalent bonds" or "intermolecular forces between atoms".
  • Giant covalent. High melting point because many strong covalent bonds must be broken; not "intermolecular forces".
  • Graphite as a lubricant. Layers slide because the forces between layers are weak; the bonds within layers are strong.
  • Malleability (S). Layers of ions slide; say "positive ions" not "atoms" or "molecules", and do not mention electrons moving for this property.

Chapter 4: Formulae, Equations and Relative Masses

  • Changing formulae to balance. Never change H₂O to H₂O₂; put numbers in front only.
  • Diatomic elements. Hydrogen, oxygen, nitrogen and the halogens are H₂, O₂, N₂, Cl₂ … in equations.
  • Brackets. Calcium hydroxide is Ca(OH)₂ (not CaOH₂); in Mᵣ, multiply everything inside the bracket.
  • Charges in formulae. Do not show charges in the formula of a compound (MgCl₂, not Mg²⁺Cl₂⁻).
  • State symbols. Water formed in a reaction at room temperature is (l); a precipitate is (s); a solution is (aq).
  • Ionic equations (S). Leave out spectator ions; the charges must balance as well as the atoms; precipitates are written as solids.
  • Aᵣ wording. Refer to "an atom of carbon-12" and "average mass of the isotopes".
  • Mᵣ has no units. It is a ratio.

Chapter 5: The Mole and Calculations

  • cm³ not converted. Divide by 1000 before using mol/dm³ (25.0 cm³ = 0.0250 dm³).
  • Mole ratio ignored. In 2NaOH + H₂SO₄, moles of NaOH = 2 × moles of acid. Halving or doubling the wrong way is common.
  • Multiplying mass by Mᵣ. n = m ÷ M, not m × M.
  • Limiting reactant. Compare the moles needed (from the ratio) with the moles present; the product is calculated from the limiting reactant.
  • Empirical formula. Use moles of atoms (÷ Aᵣ), not the percentages; divide by the smallest; do not round 1.5 to 2.
  • Gas volume. 24 dm³ is for one mole of gas at r.t.p. only (not for solids or liquids).
  • Significant figures. Give answers to the same number of significant figures as the data (usually 3); keep units.
  • Titration. Average only concordant titres; burette readings to 2 d.p.

Chapter 6: Electrolysis and Fuel Cells

  • "Chloride" or "bromide" as products. The elements formed are chlorine and bromine.
  • Mixing up the electrodes. Anode = positive; cathode = negative. Labels must point to the electrode in the electrolyte, not to the wire.
  • Sodium from aqueous solution. Hydrogen forms at the cathode instead.
  • Molten vs aqueous. Read the question: a molten salt gives the metal at the cathode, not hydrogen.
  • Electrolyte conduction. Ions move in the electrolyte; electrons move only in the wires (S).
  • Copper(II) sulfate (S). With copper electrodes the cathode gains mass, the anode loses mass and the colour stays the same; with carbon electrodes the colour fades.
  • Half-equations (S). Balance atoms and charge: 2Cl⁻ → Cl₂ + 2e⁻ (not Cl⁻ → Cl + e⁻).
  • Electroplating. The object is the cathode; the electrolyte must contain ions of the plating metal.

Chapter 7: Chemical Energetics

  • Mixing up the temperature changes. Exothermic → thermometer reading rises; endothermic → reading falls.
  • "Heat" for endothermic. Endothermic reactions take in thermal energy; do not heat a mixture when testing for this.
  • Sign of ΔH (S). Negative for exothermic, positive for endothermic.
  • Reversed subtraction (S). ΔH = bonds broken − bonds made (not made − broken).
  • Counting bonds (S). Multiply by the numbers in the equation and the bonds in each molecule (2O₂ = 2 O=O bonds).
  • Arrows on diagrams (S). Eₐ from reactants to the peak; ΔH between reactant and product levels; label both.
  • Bond breaking releases energy. No: breaking takes in energy; making releases it.

Chapter 8: Chemical Changes and Rates of Reaction

  • "More collisions". Say "more frequent collisions" (or more collisions per second). "More chance of collision" gets no credit.
  • Concentration and energy. Concentration changes the number of particles per unit volume, not the energy of particles.
  • Temperature. Write "particles have more kinetic energy", and mention activation energy (S).
  • Amount vs rate. More acid or more metal gives more product, but is not a change of rate (unless concentration or surface area changes).
  • Pressure. Only affects reactions involving gases, not reactions in solution.
  • Catalysts. A catalyst is not used up; it lowers Eₐ (S); it does not change ΔH or the amount of product.
  • Graph descriptions. "Steeper gradient = faster rate"; "levels off because a reactant is used up".

Chapter 9: Reversible Reactions and Equilibrium

  • Colours. Hydrated CuSO₄ is blue, anhydrous is white. Hydrated CoCl₂ is pink, anhydrous is blue.
  • "At equilibrium the concentrations are equal". No: they are constant (no longer changing).
  • Catalysts and equilibrium (S). A catalyst increases both rates equally; the position and the yield do not change.
  • Stating a shift without the result (S). Say what happens to the yield (e.g. "moves left, so the yield of ammonia decreases").
  • Pressure (S). Count moles of gas on each side.
  • Mixing up the processes (S). Haber: iron, 200 atm. Contact: V₂O₅, 2 atm. Give units with values.
  • Compromise (S). Explain both sides: lower temperature → higher yield, but slower rate.

Chapter 10: Redox

  • OIL RIG reversed. Oxidation is loss of electrons; reduction is gain.
  • Agents chosen from products. Oxidising and reducing agents are reactants.
  • Oxidising agent "is oxidised". No: the oxidising agent is itself reduced.
  • Sign of oxidation numbers (S). Write the sign first: −3, +6 (not 3−).
  • Ions (S). The oxidation numbers in an ion add up to the charge on the ion (e.g. in SO₄²⁻ they add to −2).
  • Roman numerals. Show the oxidation number, not the charge of a negative ion or a valency.
  • Answering in the wrong terms. If the question says "in terms of oxidation number", do not answer with oxygen or electrons.

Chapter 11: Acids, Bases and Oxides

  • Products. Metal + acid gives hydrogen; carbonate + acid gives carbon dioxide and water; base + acid gives salt + water only.
  • Indicator colours. Methyl orange: red in acid, yellow in alkali. Thymolphthalein: colourless in acid, blue in alkali.
  • Bases and alkalis. All alkalis are bases, but not all bases are alkalis (CuO is insoluble).
  • pH and H⁺. Lower pH = higher H⁺ concentration.
  • Strong vs concentrated (S). Strong = completely dissociated; concentrated = lots of acid per dm³.
  • Arrows (S). Strong acid: → ; weak acid: ⇌.
  • Amphoteric (S). Reacts with both acids and bases; name Al₂O₃ and ZnO.
  • Ammonia test. Hold damp red litmus at the mouth of the tube without touching the sides (traces of NaOH would turn it blue).

Chapter 12: Preparation of Salts

  • Filtrate and residue. The filtrate passes through the paper (the salt solution); the residue stays on the paper (the excess solid or precipitate).
  • "Heat" alone. Say "heat until the crystallisation point / until crystals start to form", then "leave to cool".
  • Heating to dryness. For hydrated crystals this is wrong.
  • Forgetting to dry. "Dry between filter papers" or "leave in a warm place".
  • Filtering a soluble salt. A soluble salt is in the filtrate; it cannot be collected on filter paper.
  • Crystallisation for insoluble salts. Insoluble salts are made by precipitation, not crystallisation.
  • Solubility rules. Lead and silver chlorides; barium, calcium and lead sulfates; all nitrates soluble.
  • Precipitation (S). Both starting substances must be dissolved (aqueous) first; wash the precipitate.

Chapter 13: The Periodic Table

  • Ordering by mass. The Periodic Table is in order of proton number.
  • Trends reversed. Group I: melting point down, reactivity up. Group VII: reactivity down, density up.
  • Halogen colours. Chlorine is a pale yellow-green gas (not a white solid); bromine is red-brown liquid; iodine grey-black solid.
  • Displacement. Identify which halogen causes it and which is displaced. "Chloride displaces bromide" is wrong; chlorine displaces bromine. No precipitate forms.
  • Transition elements. Say "transition element", not "transitional". Properties: high density, high m.p., coloured compounds, catalysts.
  • Noble gases. "Full outer shell" is the reason they are unreactive; they are monatomic.

Chapter 14: Metals, Alloys and Reactivity

  • Alloy definition. "A mixture of a metal with other elements": include both "mixture" and "metal". It is not a compound.
  • Uses. Link the use to the property: aircraft, low density; cables, low density and conductivity; wires, conductivity and ductility; food containers, corrosion resistance.
  • Water and steam. Cold water gives a hydroxide; steam gives an oxide.
  • Copper and dilute acids. No reaction.
  • Hardness (S). Say "layers of atoms cannot slide easily because of different-sized atoms", not "stronger bonds".
  • Aluminium (S). Its apparent unreactivity is due to the oxide layer, not its position.

Chapter 15: Corrosion and Extraction of Metals

  • Conditions for rusting. Both water and oxygen (air); rust is hydrated iron(III) oxide.
  • How barriers work. "Keep out water and oxygen", not "make the iron stronger".
  • Sacrificial protection (S). Zinc is more reactive, so it loses electrons (is oxidised) instead of iron.
  • Blast furnace. Coke burns to give heat and CO₂; CO is the reducing agent; limestone removes impurities as slag.
  • Bauxite. The ore of aluminium (not "aluminite").
  • Cryolite (S). Lowers the operating temperature (saves energy); it is not a catalyst.
  • Anodes (S). Replaced because oxygen reacts with the carbon to form carbon dioxide.

Chapter 16: Water and Fertilisers

  • Presence vs purity. Cobalt(II) chloride and copper(II) sulfate test for water; they do not show purity. Use melting point (0 °C) or boiling point (100 °C).
  • Colour changes. Cobalt(II) chloride blue → pink; copper(II) sulfate white → blue.
  • Treatment stages. Filtration removes solids; carbon removes tastes and odours; chlorine kills microbes. Do not say "chlorine purifies".
  • Distilled water. Used because it has fewer chemical impurities (not "to make it safe to drink").
  • Nitrates and phosphates. Cause deoxygenation of water (details of eutrophication are not needed).
  • NPK. N = nitrogen, P = phosphorus, K = potassium (not "phosphate" or "potash" as the element).

Chapter 17: Air Quality and Climate

  • Air composition. 78% nitrogen, 21% oxygen; the remainder is noble gases and carbon dioxide.
  • CO vs CO₂. CO comes from incomplete combustion and is toxic; CO₂ from complete combustion causes global warming.
  • Sources of NOₓ. Car engines; the nitrogen comes from the air, not the fuel.
  • Acid rain gases. SO₂ and oxides of nitrogen, not CO₂ or CO.
  • Greenhouse effect (S). Gases absorb infrared/thermal energy emitted by the Earth (not sunlight) and reduce thermal energy loss to space. Do not mention the ozone layer.
  • Catalytic converter equation (S). 2CO + 2NO → 2CO₂ + N₂; it removes pollutants; it does not produce oxides of nitrogen.
  • Photosynthesis. Needs light and chlorophyll; products are glucose and oxygen.

Chapter 18: Organic Chemistry: Fuels and Alkanes

  • Displayed formulae. Show every bond, including O–H. Each C has four bonds.
  • Hydrocarbon definition. Hydrogen and carbon only.
  • Fractional distillation. Fractions separate because of different boiling points (not cracking, not filtration).
  • Trends. Towards the top: shorter chains, lower boiling points, more volatile, less viscous.
  • Uses. Match each fraction to its use exactly (naphtha: chemical feedstock; kerosene: jet fuel).
  • Alkane reactions. Only combustion and substitution; alkanes do not decolourise bromine water.
  • Isomers (S). Same molecular formula, different structural formula. Bending a chain does not make a new isomer.
  • Substitution (S). Needs UV light; products are a chloroalkane and HCl.

Chapter 19: Alkenes, Alcohols and Carboxylic Acids

  • Bromine water. Orange → colourless (not "clear", not "goes white").
  • Cracking conditions. High temperature and a catalyst; products include alkenes.
  • Fermentation conditions. Yeast, 25–35 °C, no oxygen. Do not confuse with steam + ethene (300 °C, 60 atm, acid catalyst).
  • Ethanoate salts. Name as "sodium ethanoate", not "sodium ethanoic".
  • Ester names (S). Alcohol first (-yl), acid second (-oate).
  • Addition (S). Only one product; draw all bonds in displayed formulae, including O–H.
  • Displayed formula of ethanoic acid. C=O and C–O–H on the same carbon.

Chapter 20: Polymers

  • Polymer definition. Large molecules made from many small monomers.
  • Repeat unit (S). No C=C in the repeat unit; show the extension bonds through the brackets; include n.
  • Monomer from a polymer (S). Two carbons only from the main chain, with C=C.
  • Condensation (S). Name the small molecule lost (water) and the link (amide –CONH– / ester –COO–).
  • Disposal. Non-biodegradable → landfill and oceans; burning → toxic gases.
  • Proteins (S). Natural polyamides from amino acids; link –CONH–.

Chapter 21: Experimental Techniques and Separation

  • Filtrate vs residue. Filtrate passes through; residue stays on the paper.
  • Chromatography. Baseline in pencil; solvent level below the baseline; do not let the solvent reach the top.
  • Pure in chromatography. One spot only.
  • Rf (S). Measure both distances from the baseline (not from the bottom of the paper).
  • Precision. Measuring cylinders are less precise than burettes and pipettes.
  • Distillation. Simple distillation separates a solvent from dissolved solids; fractional distillation separates liquids with different boiling points.
  • Purity. Use melting point / boiling point, not appearance or colour.

Chapter 22: Identification of Ions and Gases

  • Missing "precipitate". "White" alone is not enough; say "white precipitate".
  • Wrong acid. Use dilute nitric acid for the halide and sulfate tests.
  • Halide colours. Cl⁻ white, Br⁻ cream, I⁻ yellow.
  • Nitrate test. Needs aluminium foil and NaOH; the gas is ammonia.
  • Chlorine test. Damp litmus is bleached; "turns red" is not enough.
  • Excess. Al³⁺ dissolves in excess NaOH but not NH₃; Zn²⁺ dissolves in both; Cu²⁺ dissolves in excess NH₃ (dark blue).
  • Flame colours. K⁺ lilac; Ca²⁺ orange-red; Ba²⁺ light green; Cu²⁺ blue-green; Li⁺ red; Na⁺ yellow.
  • Sulfite. Acidified potassium manganate(VII): purple to colourless.
Want the full chapter, not just the mistakes? Our IGCSE Chemistry 0620 notes cover every syllabus statement with worked examples, 20 MCQs per chapter and original exam-style questions with full mark schemes.

Prices shown in US dollars. Show prices in: ₹ INR · US$ USD