Free resource · Cambridge AS & A Level Mathematics 9709
AS & A Level Mathematics 9709: 236 common mistakes that lose marks
Most marks in Cambridge AS & A Level Mathematics are lost to the same habits every year: a missing unit, a vague word where the mark scheme wants a precise one, a step skipped in an explanation. Below are 236 mistakes from 32 chapters, each with the correct version. Read the chapter you are revising, then try its questions.
Notes Bazar is independent and not endorsed by or affiliated with Cambridge University Press & Assessment. Cambridge IGCSE, AS & A Level are trademarks of Cambridge University Press & Assessment.
- Quadratics
- Functions
- Coordinate Geometry
- Circular Measure
- Trigonometry
- Series
- Differentiation
- Integration
- Algebra
- Logarithmic and Exponential Functions
- Trigonometry
- Differentiation
- Integration
- Numerical Solution of Equations
- Vectors
- Differential Equations
- Complex Numbers
- Forces and Equilibrium
- Kinematics of Motion in a Straight Line
- Momentum
- Newton's Laws of Motion
- Energy, Work and Power
- Representation of Data
- Permutations and Combinations
- Probability
- Discrete Random Variables
- The Normal Distribution
- The Poisson Distribution
- Linear Combinations of Random Variables
- Continuous Random Variables
- Sampling and Estimation
- Hypothesis Tests
Chapter 1: Quadratics
- Calculator-only solutions of quadratics, or quoting the formula without substituting values.
- Completing the square with : forgetting to multiply the term by : .
- Wrong discriminant condition: using for "does not meet", or for "real roots" (it is ).
- Losing a solution: discarding the negative value of (its cube root is fine), or writing .
- Using as the substitution letter for or , then forgetting to change back.
- Algebra slips when clearing fractions, e.g. becoming .
- Inequality sets written as one impossible statement such as .
Chapter 2: Functions
- Range and domain confused: giving the domain of f (e.g. ) when asked for the range, or writing a range as "".
- Range from the end points only, when the vertex lies inside the domain.
- Wrong order of a composite: worked out as ; or dropping part of the rule (e.g. the "" in ) when substituting.
- Algebra slips when clearing fractions, e.g. not multiplying every term by the denominator.
- Transformations described vaguely: "moved left 6" without a vector or direction; a stretch without its direction or scale factor; or describing the reverse transformation.
- The mirror line drawn from corner to corner of a grid with unequal scales, or a graph reflected in a horizontal line instead.
Chapter 3: Coordinate Geometry
- Circle equation: "" or "" instead of ; signs of the centre wrong; brackets not squared; and swapped.
- Gradient of a radius inverted (), or the tangent given the radius gradient instead of its negative reciprocal.
- Not linking parts: a later part often needs the centre, radius or tangent found earlier.
- Quadratics solved by calculator only when finding intersections: no method seen, marks lost.
- Surd form not understood: giving 4.47 when (exact) is required.
- Arithmetic slips with negatives in the distance formula: with is .
Chapter 4: Circular Measure
- Calculator in degree mode, or using the angle in degrees in (e.g. ).
- Finding an area when a perimeter is asked (e.g. area of segment instead of its perimeter), or leaving out one of the radii in a sector perimeter.
- Assuming a triangle is right-angled when it is not; use the cosine rule or split an isosceles triangle in half.
- Forgetting the in or in .
- Using the arc length instead of the radius, or the wrong length (e.g. instead of ) as the radius of the sector.
- Premature rounding of angles such as , giving a final answer outside the allowed range.
Chapter 5: Trigonometry
- Invalid identities. Writing (it is ) or .
- Cancelling a common factor. Dividing both sides by or by loses the solutions of that factor ; factorise instead.
- Missing solutions. Giving only the calculator value, or only two answers when the multiple angle gives four.
- Wrong interval for a multiple angle. Solving in instead of .
- Degree/radian mix-ups. Answers in degrees for a radian interval, or the calculator in the wrong mode.
- Range of a trig function. Substituting the end-points of the domain instead of using (e.g. for the range is ).
- Sketches with the wrong period or a non-periodic curve; has period , has period .
- Principal values. gives values in and , in ; .
- Rounding. Rounding the principal value early (e.g. 75.5° → 76°) and then adding 180°: keep full accuracy until the end.
Chapter 6: Series
- Powers on the constant. Writing instead of for a term of : the whole term is squared.
- Signs in the second and third terms. With , odd powers of are negative.
- Products of brackets. Adding the coefficients of both brackets, or choosing the larger, instead of multiplying the pairs of terms that make .
- Losing a root. gives : the negative value is often lost.
- Equation instead of inequality. Solving and rounding down; the question asks for the least with .
- Unjustified solutions. Writing the roots of a quadratic or cubic in with no method shown; a visible method of solution is required.
- Sum to infinity with . is meaningless unless .
- th term confused with the sum. "How much in the 10th year" is , "how much in 10 years altogether" is .
Chapter 7: Differentiation
- Forgetting the chain rule. ; the "" is often missed, especially with square roots.
- Power errors with negative and fractional indices. (not ); .
- Rates of change without differentiating. Substituting the given value into the volume formula instead of into .
- Substituting too early. Putting into and then "differentiating" a number.
- Using for the normal. The normal gradient is .
- Wrong conclusion about the nature. Arithmetic slips in lead to "maximum" for a minimum; show the substitution.
- Final form. A correct tangent not rearranged into the form the question asks for (e.g. with integers) loses the A mark.
Chapter 8: Integration
- Differentiating instead of integrating (or mixing the two): powers must go up by one.
- Forgetting to divide by in , or multiplying by as in differentiation.
- Negative powers. , not .
- Missing or unused , or finding but not writing the final "" equation (or not simplifying, e.g. leaving ).
- Limits not shown. Writing only the final number from a calculator; examiners need to see the substitution.
- Volumes: integrating instead of ; using for a washer; forgetting to subtract the cylinder or cone that is not part of the solid.
- Areas below the axis taken as negative, or cancelling with areas above the axis.
- Area between a curve and a line: using the wrong limits, or subtracting the curve from the line the wrong way round (giving a negative area).
Chapter 9: Algebra
- Squaring when only one side is a modulus. In the 2023 reports, squaring produced an extra critical value (such as ) that was not a real crossing point.
- Poor modulus sketches: curved arms, or the vertex drawn on the -axis instead of at .
- Using an invalid root. Putting a negative value from an earlier part equal to a modulus expression, which can never be negative.
- Sign slips in long division, e.g. subtracting wrongly and getting the remainder ; and stopping at when the quotient also factorises.
- Powers of instead of . In the term contains , not .
- Too few terms or unnecessary work. Finding the term when the term was needed; splitting into partial fractions when a direct expansion was quicker; choosing a two-term form that makes later integration harder.
- Wrong form for a repeated factor: is missing the term.
Chapter 10: Logarithmic and Exponential Functions
- Brackets omitted when taking logs (2023 reports), e.g. written as , leading to wrong simplification.
- Invented log laws: ; ; and "" style rewrites.
- Not rejecting impossible values: keeping the negative root when came from logs of ; trying to process .
- Wrong accuracy or form: 3 s.f. given when 3 d.p. was asked, a decimal when an exact answer was asked, or left unsimplified.
- Linear form: finding the gradient but not linking it to the right constant (e.g. has gradient and intercept ; solve for first).
- Poor sketches: crossing the -axis away from 1, drawn for , or levelling off.
- Inequality sign not reversed after dividing by a negative logarithm such as .
Chapter 11: Trigonometry
- Losing the bracket. written as instead of (a common error in the 2023 Paper 2 reports).
- Wrong half-angle formula. Writing ; the correct link is .
- Missing solutions from negative angles. In , the angle can be negative; examiners saw answers such as 29.8° omitted and out-of-range ones such as 389.8° included.
- Wrong second solution. Using for tan (it should be ), or instead of finding all values of first.
- Sign and surd slips in expansions. (plus sign); , not .
- Mixing degrees and radians, e.g. finding in degrees and then solving in radians.
- Not using the form for greatest/least values. The extreme occurs when .
Chapter 12: Differentiation
- Missing the inner derivative: (should be ), or the 2 omitted from (2023 reports).
- Not recognising a product, e.g. differentiating as ; or , which forgets one term.
- Wrong derivative of : answers with or ; confusing with . The correct result is .
- Treating a constant as a variable in implicit work: differentiating as a product when is a constant.
- Algebra after the calculus: inverting as ; sign errors when collecting terms; brackets dropped in the quotient rule.
- Notation: mixing , and in a parametric answer, or omitting the variable altogether.
- Normal or tangent: using the tangent gradient for the normal, or forgetting to find and from first.
Chapter 13: Integration
- Calculator integration. "Using a calculator for integration is not sufficient": the algebraic integral and the substitution of limits must be seen (2023 reports, all papers).
- Logs for the repeated factor. was often given as a third log term; it is . Wrong partial-fraction forms such as made the integral much harder.
- Wrong coefficient. : was common in place of (take out the 9 first). Also when there is no on top.
- Substitution slips. Missing or , a minus sign that disappears without the limits being reversed, limits used in the wrong order, or old -limits used with a integral.
- Losing a constant. Taking the 2 outside the integral and forgetting it at the end; integrating as instead of .
- Wrong identities. is wrong: use . Also (the angle must double to ).
- Sign errors in parts, especially when or ; put the negative in brackets.
- Degrees. All calculus with trigonometric functions uses radians.
Chapter 14: Numerical Solution of Equations
- No conclusion after the sign-change calculation, or vague statements "not supported by numerical evidence" (2023 reports).
- Numbers instead of algebra when asked to show how the formula relates to the equation; working backwards from the equation was less successful than starting from .
- Degrees instead of radians in a trigonometric iteration: no marks at all.
- Wrong rounding of the final answer, e.g. 0.80 instead of 0.79, or iterates not given to the required 4 d.p.
- Too few iterations for a slowly converging sequence, so the stated value is not confirmed; or many unnecessary iterations after convergence.
- Confusing notation such as for , or .
- Sketches unrecognisable: unlabelled curves, no scale, crossing the axis away from or with a horizontal asymptote.
- Trusting a sign change across an asymptote, or concluding "no root" when there is no sign change.
Chapter 15: Vectors
- Vertices out of order. In parallelogram , , not ; many candidates "incorrectly assumed that " (2023).
- Wrong form of the line: , or finding and stopping, which left no simultaneous equations.
- Not checking the third equation after solving two, so skew lines were declared to intersect.
- Using position vectors instead of direction vectors for the angle between lines; or using and for angle .
- Direction errors in ( instead of ), not squaring a component when finding a magnitude, and arithmetic slips when copying vectors from line to line.
- Answering a different question: finding when was asked, or instead of .
- Obtuse angle left as the answer when the angle between two lines is required.
Chapter 16: Differential Equations
- Incorrect separation. Writing when the equation contained , or leaving an on the side. Simplify the expression first.
- Wrong coefficient in . , not . Rewrite as if unsure.
- Using degrees to find the constant from a or value.
- Constant in the wrong place. From writing ; or adding the constant only after rearranging.
- Partial fractions. Splitting into ; use the factorised denominator with correct partial fractions.
- Sign slips integrating : the result is .
- Guessing the long-term behaviour (" tends to zero") without looking at the solution.
Chapter 17: Complex Numbers
- Wrong quadrant. is , not : cannot see the signs. Look at the signs of the real and imaginary parts first.
- Ignoring the conjugate sign , or equating an expression to instead of to the given right-hand side (or 0).
- Unequal scales on an Argand diagram, so the "circle" and the half-line do not match the scale.
- Half-line drawn as a full line for , or drawn from the wrong point.
- Shading the wrong region, or not making clear which side of the perpendicular bisector is wanted.
- Finding only part of an angle (e.g. only the angle at the centre) or giving a length when an angle is asked for.
- Using a calculator to write down the roots of a polynomial without showing they satisfy the equation.
- Sign slips such as , or .
Chapter 18: Forces and Equilibrium
- No force diagram: examiners repeat that "a well annotated force diagram" would have stopped candidates leaving out a force or a component.
- Normal reaction taken as or when another force (a pull at an angle, a horizontal push) also has a component perpendicular to the surface.
- Mixing up sin and cos when resolving the weight on a slope, and sign errors in the parallel equation.
- One string, two tensions: a single string over a smooth peg or ring has the same tension in both parts; some candidates used two different tensions or included only one of the two tensions in a resolving equation.
- used when the particle is not about to slip; or friction drawn in the wrong direction in one of the two limiting cases.
- Premature rounding of an angle or of intermediate values, so the final answer is not correct to 3 s.f.
- Scale drawing instead of calculation: it gains no marks.
Chapter 19: Kinematics of Motion in a Straight Line
- Using suvat when the acceleration is not constant: when is given as a function of you must differentiate or integrate. Examiners report this as a frequent error.
- Solving to find when a particle is at rest; at rest means .
- Giving a negative speed, e.g. writing −7.2 for a speed when 7.2 is wanted (or a velocity when the speed is wanted).
- Area slips: forgetting the in a triangle, or assuming two line segments form an isosceles triangle when the graph does not say so.
- Distance = displacement when the particle changes direction: find where and add the separate areas.
- Time measured from the wrong origin (e.g. instead of ) in multi-stage graphs.
- Differentiating twice and quoting as the maximum acceleration, or not stating which value is the maximum.
Chapter 20: Momentum
- Missing a negative sign for a particle moving in the opposite direction: examiners report that many candidates did not take account of particles moving towards each other, then changed a negative answer to positive without justification.
- Including a third particle in the equation for a collision between two of them (e.g. including P in the collision between Q and R).
- Assuming a particle keeps moving after it has been stated (or shown) to come to rest.
- Using conservation of kinetic energy instead of conservation of momentum.
- Giving a velocity when a speed is asked (e.g. −1.33 instead of 1.33), or the reverse; and answers "not in terms of " when that was asked.
- Dividing the wrong way round when solving, e.g. 1.25 instead of 0.8.
- Kinetic energy errors: finding the difference of the two particles' initial KEs instead of total before − total after, or evaluating as .
Chapter 21: Newton's Laws of Motion
- Wrong mass in a system equation (examiners saw this often in connected-particle questions); or including the tension and the trailer resistance as if they were both external to the system.
- Missing a force: leaving out friction or the tension in one particle's equation; "a well annotated force diagram would have helped" is the most repeated examiner comment.
- Normal reaction on a slope taken as instead of (plus any perpendicular component of an applied force); mixing up and .
- Two tensions for one string over a smooth pulley, or only one tension in a horizontal equation when the string pulls the particle twice.
- Same acceleration on rough and smooth sections: when a particle leaves a rough surface the friction term disappears, so the acceleration changes.
- Lift questions: using a deceleration with the wrong sign, or including the mass of the lift when only the passenger is being considered.
- Premature rounding of an angle such as when is given; this loses the accuracy mark.
Chapter 22: Energy, Work and Power
- Forces instead of work in an energy equation: writing the resistance 24 N instead of distance. Examiners report this every year; check that every term is in joules.
- Change in KE written as instead of ; or (after a collision) the difference of the separate KEs instead of total KE before − total KE after.
- Constant-acceleration equations with constant power: the driving force changes, so the acceleration is not constant.
- Omitting the distance in the friction term ( instead of ), or using on a slope instead of .
- Sign errors: putting the work done against resistance on the wrong side, or leaving out work done by a person pushing (the "child pushes off" term).
- Wrong height: using the distance along the slope as , or the wrong difference in height between two points.
- Using 16 instead of 16 000 for 16 kW; premature rounding of or of the PE term.
Chapter 23: Representation of Data
- Coded totals: taking without subtracting the square of the coded mean; or writing instead of (e.g. for 40 values).
- Bar chart instead of histogram: plotting frequency, leaving gaps, or using the stated class limits (10–14) instead of the boundaries (9.5–14.5).
- Median class taken as the middle class of the table instead of the class containing the th value.
- Back-to-back diagrams: reading the left-hand leaves the wrong way, e.g. giving the 15th value from the wrong end.
- Box plots drawn freehand, on a non-linear scale, or combined so the two sets cannot be told apart.
- Combining data sets by averaging the two means or the two standard deviations.
- Grouped data mean using class limits or class widths instead of mid-interval values.
Chapter 24: Permutations and Combinations
- Adding instead of multiplying: for "3 men and 3 women" (examiners saw this often); or summing combinations inside one case.
- Treating repeated letters as different, e.g. giving for a word with 3 Os and 2 Cs; or forgetting to divide by for letters still repeated after some are fixed.
- Missing a case, most often the "0" case (no brothers), or selecting the rest from the wrong number of people.
- "Not together" for three people done as total − (all three together), which still includes arrangements with two of them together. Use the gaps method.
- Blocks: not arranging the blocks themselves (e.g. giving 288 instead of ), or not arranging the people within each block.
- Conditional probability with arrangements: dividing by the wrong total; the denominator is the number of arrangements satisfying the given condition.
- Using where order matters (prizes, positions, numbers) or for a committee.
Chapter 25: Probability
- Treating totals as equally likely, e.g. P(total 7) : use the 36-cell grid.
- Missing the arrangements: three different colours can come in orders; multiplying one path only gives of the answer.
- Assuming independence when finding in a conditional probability, e.g. multiplying by without reason.
- Wrong denominator for : dividing by the total instead of by , or using only one branch of the tree for .
- Using unconditional probabilities on the second stage of a tree: after "it rained yesterday" or "without replacement", the probabilities change.
- Confusing exclusive with independent: "independent because they cannot both happen" is wrong.
- Poor notation: write , not P(AB) or P(A + B).
- Rounding an exact answer such as to 0.175 is fine, but 0.18 loses the accuracy mark.
Chapter 26: Discrete Random Variables
- Probabilities that do not add to 1 or are negative; or extra values of that cannot occur.
- Forgetting to subtract in , or subtracting instead of its square.
- Missing binomial coefficients: without .
- Misreading "at least", "more than": e.g. omitting when finding , or not subtracting from 1.
- Using a binomial model for "until the first success", or finding only when the question asks for "within 5 trials" ().
- Writing for a geometric variable, or working out when the question says "state": .
- Including an extra trial: "more than 5 trials needed" is , not .
- Premature rounding of probabilities used again later (e.g. a binomial probability then used as in a second binomial).
Chapter 27: The Normal Distribution
- Variance for standard deviation. In , divide by , not 25.
- Using a probability as a -value, e.g. writing instead of .
- Wrong sign of when the value is below the mean; making positive at the end does not repair the earlier error.
- Premature rounding: 1.28 instead of 1.282, or rounded before it is used again.
- Wrong area: giving when is needed; assuming a two-sided area is symmetric without checking.
- Continuity correction missing, in the wrong direction ("between 36 and 48 inclusive" is 35.5 to 48.5), or used for continuous data.
- Stopping early: not multiplying by the number of items, or not giving that number as a whole number.
- Justifying the approximation with " is large" only: state and with the actual values.
Chapter 28: The Poisson Distribution
- Not scaling to the interval, e.g. using 4.5 for a 20-minute period.
- Omitting a term, e.g. leaving out in , or forgetting the "" in "at least".
- Using the binomial or normal when a Poisson approximation was intended (large , small ).
- Conditions not in context: "events independent, singly, at random" copied from a textbook, or simply repeating "constant rate" given in the question.
- Continuity correction missing or in the wrong direction; a probability area greater than 0.5 when it should be less.
- Using as the standard deviation in the normal approximation: .
- Premature rounding of (e.g. 3.4163 rounded to 3.4), changing the third significant figure.
- Two significant figures (0.044) instead of three (0.0441).
Chapter 29: Linear Combinations of Random Variables
- Subtracting variances: instead of .
- Not squaring the coefficient: taken as ; or squaring the variance instead, e.g. using when the variance is already 20.
- Confusing with , e.g. working "per day" when the question is about a total over 7 days.
- Only one tail for "the two values differ by more than 2": found, forgotten, or the two multiplied.
- Wrong area: answer below 0.5 when the sketch shows more than half the curve is shaded.
- Wrong Poisson parameter: using one rate (e.g. 2.5) instead of the combined rate (5.1 + 2.5), or omitting a term in .
- Assumptions not stated in context: "independent" alone; say e.g. "the masses of the jars are independent of each other".
- Premature rounding: answers to 2 s.f. (0.044) or 3 d.p. instead of 3 s.f.
Chapter 30: Continuous Random Variables
- Only one property checked when showing a function is a pdf: the area is 1 is shown but is not stated.
- Integrating instead of for the mean, or omitting the altogether.
- Confusing the mean and the median: using or for the median.
- Variance without subtracting , or subtracting instead of its square.
- Integration slips: wrong power when integrating , or losing a factor when multiplying out before integrating.
- Setting equal to the height of a triangle instead of finding from it (height , not ).
- Integrating where geometry is easier: a semicircle has area , a triangle .
- Vague explanations, e.g. "the graph is skewed" to justify where the median lies; use the areas either side of the value instead.
Chapter 31: Sampling and Estimation
- Using instead of when standardising a sample mean.
- Confusing the two variance formulae: against ; or dividing by (the biased estimate).
- Omitting the factor 2 when the width of the interval is given, or using the wrong (1.96 for a 90% interval).
- Centring the interval on the count (46) instead of the proportion (), or giving two separate values instead of an interval.
- Vague comments on sampling: "only January to March was used" without saying these months are not typical of the year; comments about sample size instead of bias.
- Not knowing when the CLT is unnecessary: if the population is normal, is exactly normal.
- Interpreting a 95% interval as "95% of the data lie in it" or "the mean is in it with certainty".
- Several intervals: squaring the wrong probability, or using normal tables, instead of etc.
Chapter 32: Hypothesis Tests
- Hypotheses missing, written with or for a Poisson mean, or as "".
- Using a single probability instead of the tail , or including an extra term (e.g. in found as ).
- Wrong parameter: using the rate per week (1.9) when the observation is over 4 weeks (7.6).
- Two-tailed tests compared with 0.01 instead of 0.005 (or 0.05 instead of 0.025).
- Definite conclusions ("the mean has decreased") or conclusions not in context.
- Normal approximations without a continuity correction, or with the wrong area (greater than 0.5).
- Type I probability given as 0.05 for a binomial or Poisson test; it is the actual probability of the critical region.
- Type II error found without a new parameter value, or explained without context.
Want the full chapter, not just the mistakes? Our AS & A Level Mathematics 9709 notes cover every syllabus statement with worked examples, 20 MCQs per chapter and original exam-style questions with full mark schemes.
